greenair 966 User manual

10. Do not place the device close to walls, ceilings, furniture surfaces
as excess steam could cause oil damage.
1. Clean the machine and change the water after every use
2. Shut off the power before cleaning
3. Only use the original adapter provided by the manufacturer
4. If you don’t use the device for a long time, shut off and pour water out, air dry the
cartridge to prevent mold build up
5. Never use steamed water. Never use corrosive solvent to clean product
6. Do not tamper with fog maker and avoid product hitting other objects
7. Never touch the mist making disc when product is working, as this could cause
pain and damage the machine. Do not use excessive force when cleaning
8. Never operate with wet hands..
!
!
!
!
!
Please read the instructions carefully before using. Manufacturer accepts no
liability for damage caused by incorrect use of the USB Oil Diffuser.
Warning and cautions
!
No allowed actions Strictly prohibited
!
9. Do not use other liquids except for water & drops of essential oils
11. Clean the device with water and paper towel. Do not use solvents or any other
substance/solution.
!
Precaution
Greenair will be happy to assist you if you have any questions.
Please email our customer service department at
[e-mail]
or call our customer service department at 1-888-548-0040.
We will return your call or email within 24 hours.
© 2016 GREENAIR INC.
CLEVELAND,OH 44130 MADEIN CHINA
www.newgreenair.com
01 02
usb
AromaDiffuser
organic & earth friendly
Perfect for
office, desks,
& small spaces.
Plugs into your computer
Add
5 drops
of fragrant
oil for
healthful
benefit
Features
2 Settings:
Interval
& Continuous.
Cartridge
Fog Area
base diffuser unit
(1 pc)
replacement
oil diffuser cartridges
(3 pc)
USB cable
(1 pc)
Congratulations on your purchase of the Greenair USB Aroma

Using incorrect water
Unit needs to be cleaned. Oils are
clogging fog maker
Water level is higher than max level line
Use wet Q Tip to gently clean the
Fog maker area
Pour excessive water out
Use tap water
Power off to prevent permanent
damage
Unit out of waterUnit will not stop
running even
though empty
Out of essential oil
Refill essential oil to bottle or
change with a full bottle
no mist, little mist
No mist
CAUTION: Keep away from children and pets. Do not useon wooden
or painted surfaces that can be damaged by essential oil. Keep the
unit upright at all times. Do not tilt unit at any time as water may spill and
damage furnishings and fabrics.Do not aim the mist directlytowards
your computer.
SYMPTOM CAUSE SOLUTION
Operation Operation Mode
Specifications
Operation 0403 05
Troubleshooting
Level 1 :
Interval Mode
Level 2 :
Continuous Mode
Add about 5
to 6 drops of
essential oils
directly in to the
water. Then
replace the
top.
Item No 00966
Color White cover and base
LED Lights Blue: Interval mist
Blue: Continuous mist
Mode Misting Off or On/Interval/Continuous
Capacity 160 ml / 5.4 fl oz
Run Time Up to 4.5 hours (auto timer shut off)
Coverage Up to 50 square feet
Voltage DC 5 V
Changing the cartridge
Cartridge in tap
Water for about
5~10 seconds
Fill the base with tap water
(use only regular cold tap
water, not heated)
Cartridge into the holder.
Plug the provided USB Cable into your
computer’s USB Port.
Intermittent Mist, Level 1: Alternating misting
mode in 3 seconds interval.
Continuous Mist, Level 2: Continuous misting
mode.
Unit is out of water Add additional water
We recommend that you clean your USB Aroma
Diffuser after every 10 hours of usage to prevent clogs
or build up on the internal parts.
To clean your diffuser, follow these 3 simple steps:
1. Remove the Oil Diffuser Cartridge and empty the
water. Use a damp paper towel and gently wipe
clean the components where essential oil may
have accumulated (repeat this step if necessary).
2. Do not mix oils on the same Essential Oil Cartridge.
Replace the used Essential Oil Cartridge with a new
one when changing oils. Air dry the changed out
cartridge if the same fragrance will be used again
at a later time.
3. Use a wet Q-Tip to gently clean the fog area.
NOTE: Never submerge the unit in water.
How to clean
•฀Step฀1•฀Step฀2•฀Step฀3level is up to the max level before each use to prevent damaging
the unit.
mode button will resent the timer cycle. Make sure water level is up to
max level each time a mode change is made.
USEFUL TIPS