Parts Required !
Stainless steel flex connectors hoses with a shut offvalve on the inlet and outlet will
work best with the Quad Flow CMB. !
When filling the Quad Flow CMB after each filter change, be sure crack valves slightly
until the Quad Flow is fully charged with water before opening valves completely. !
For the Quad Flow, flex connectors, copper, PEX or PVC may be used to connect to
your water supply.!
Safety
Check and comply with your state and local building codes. You must follow the
guidelines. Use care when handling the structuring system. Any modifications to your
current plumbing system should be referred to a qualified plumber. !
Quad Flow/ Quad Flow CMB Installation
1. The Quad Flow is bi-directional. Water can flow either way through the unit. !
2. There are no filters to change or maintenance for the Quad Flow. !
3. The Quad Flow CMB requires a yearly cartridge change for both chambers. !
4. The Quad Flow holds two 2.5 x 20 cartridges Ceramic Mineral Ball Cartridges!
Quad Flow CMB Quad Flow!
