Greenheck Vektor-HS User manual

®
Document 484316
Miami-Dade Notice of Approval (NOA)
Installation Guide for Vektor-H and Vektor-HS
Vektor-H and HS NOA Installation Guide 1
®
Installation, Operation and Maintenance Manual
Please read and save these instructions for future reference. Read carefully before attempting to assemble,
install, operate or maintain the product described. Protect yourself and others by observing all safety
information. Failure to comply with these instructions will result in voiding of the product warranty and may
result in personal injury and/or property damage.
Installation methods for Greenheck Vektor-H and Vektor-HS fans with Miami-Dade NOA
Certification per NOA No. 19-0520.03
Steel Anchoring – Thru Bolts
Timber Anchoring
Concrete Deck Anchoring
Building member
*5/16 in. dia. self tapping screw
(or better)
5/16 in. min. thread engagement
7/8 in. min. edge distance on
building member
1-3/8 in. max. distance from
vertical face of curb
Building member
Wood timber
6 in. thick min.
Min. S. G. = 0.5
3000 min. PSI
6 in. thick min.
*5/8 in. dia. Grade 2 bolt
(or better)
1-1/4 in. min. edge distance
on building member
1-3/8 in. max. distance from
vertical face of curb
*5/8 in. Kwik bolt TZ
4 in. min. embedment
12 in. min. edge distance
*5/8 in. Grade 2 lag bolt
(or better)
5-7/8 in. min. thread
engagement
2-1/2 in. min. edge distance
10 in. min. end distance
Steel Anchoring – Self Drill / Tap Fasteners
Must be installed with Greenheck model GPFHD curb.
*Fasteners installed per manufacturers instructions.

484316 • Vektor-H and HS NOA Installation Guide, Rev. 1, March 2020 Copyright 2020 © Greenheck Fan Corporation2
®
Phone: [phone] • Fax: [phone] • Parts: 800.355.5354 • E-mail: [email protected] • Website: www.greenheck.com
Model
MINIMUM NUMBER OF FASTENERS PER SIDE TO ATTACH CURB TO STRUCTURE (excludes 4 corner fasteners)
USE ONE 2 in. x 2 in. x 1/4 in. SQUARE WASHER UNDER ALL FASTENERS
Concrete Deck Anchoring Steel Anchoring Thru Bolts Timber Anchoring Steel Anchoring Self-Drill/Tap
1x1 or
fan only 2x1 3x1 1x1 or fan only 2x1 3x1 1x1 or fan only 2x1 3x1 1x1 or fan only 2x1 3x1
Vektor-H-9
4
9 14
258510 16 7 13
20
Vektor-H-10
Vektor-H-12
Vektor-H-13
Vektor-H-16
Vektor-H-18
813 19Vektor-H-22
Vektor-H-24 14 6
Vektor-H-30 5 10 15 36 9 12 18 8 14 22
Vektor-H-36 6 12 18 7 11 8 14 22 9 17 26
Curb Fasteners
Curb to be Greenheck model GPFHD.
1X1 OR FAN ONLY CURB
2X1 OR 3X1 CURB
One fastener
in each corner
1x1 min. number
of fasteners
Equally
spaced
Angle, one per side A1018 CS,
5 in. x 2 in. x 5/16 in. thick
One fastener
in each corner
Equally
spaced
Equally
spaced
1-3/8 in. max distance
from vertical face
of curb
5 in. flange
1-3/8 in. max distance
from vertical face
of curb
5 in. flange
2 in.
5 in.
Length equal to actual
outside length of curb