greenhouse sensation Quadgrow User manual

Assembly instructions
Pot
Feeder
Tray
FeederMat
SmartReservoir
HARVEST
Place the seeds in the compost discs Place the seedling in their compost discs
into the coir pots and add compost
Choose the three strongest and healthiest
plants to pot into the colourful pots then fill
the gaps around the coir pots with compost
Once your plant has fruited, carefully pick
the delicious vegetables and enjoy!
Watch your plants grow and dont forget to
water when compost feels dry to touch
12
3
5
4
Contents Quadgrow Quadgrow
x2 Chilligrow
SmartReservoir 121
Feeder Tray 121
Pots 483
FeederMats 483
Black top up bung – – 1
Dipstick
(used to check the
water level in the
SmartReservoir)
111
Nutrients 1x A Bottle
1x B Bottle
1x A Bottle
1x B Bottle
1x A Bottle
1x B Bottle
Access cover 1 2 –
21mm black grommet 1 2 –
Quadgrow Quadgrow Chilligrow
x2
Please note: The above diagram illustrates the Quadgrow. The Chilligrow has 3 pots,
however the self-watering technique works in the same way.

Set-up instructions
If you are not using a holiday watering kit then you can insert the 21mm black grommet
into the holiday watering kit hole. If you have purchased a holiday watering kit then you
do not need to use the grommet. Instead refer to the holiday watering kit instructions.
• Place your SmartReservoir on an even surface.
• Place the Feeder Tray on top of the SmartReservoir.
• If you have a Chilligrow, insert the black top up bung into the hole. This hole is
for topping up your SmartReservoir. At this point DO NOT add any water into the
SmartReservoir.
• If you have a Quadgrow, place the access cover on the open end of the
SmartReservoir.
• Wet one of the FeederMats.
• Insert the FeederMat through the hole into
the bottom of one of the pots until the pointed
tip is just below the top of the pot (see image)
• Insert the FeederMat through the hole in the
Feeder Tray and sit the pot in position. Ensure
the FeederMat is touching the bottom of
the reservoir.
• Repeat this with all pots.
• Fill the pots with compost while taking care
to keep the FeederMat upright.
• Firm the compost down around the FeederMat
ensuring there is good contact between the
FeederMat and the compost.
• Make a hole in the compost large enough for
your plant. Add your plant. Firm the compost
down gently around the plant to settle the compost.
• Water well using a watering can with a rose until the
compost is moist but not saturated.
IMPORTANT: Do not add water to the SmartReservoir at this point.
Feeding and watering
IMPORTANT:
• Add water to your nutrient bottles as indicated on the bottles.
• Once the top of the compost is dry to the touch (a few days to a week) fill your
SmartReservoir with water and nutrients using the dosage rates below.
• DO NOT mix the nutrients together. It is important to add water to the watering can
and then add the ‘A’ nutrients to the water followed by the ‘B’ nutrients using the
dosage rates below.

Compost information
Use a standard multi-purpose compost, not a water-retaining/moisture-control or heavily
fertilised one. Most compost contains nutrients. Check your compost bag to identify how
many weeks feed the compost contains and add nutrients as described below from one
week before the compost is due to run out of feed. If your compost does not contain
nutrients, start adding the nutrients from week one.
Dosage rates
Add 6ml of nutrient ‘A’ and 6ml of nutrient ‘B’ to every 1 litre of water. Top-up the
SmartReservoir as necessary. For best results keep the SmartReservoir fully topped-up.
The Quadgrow holds 30 Litres. The Chilligrow holds 7 Litres.
During warm weather dampen your compost from the top when you top-up
your SmartReservoir
Optional accessories
Greenhouse Sensation have a range of other options to help you make the most of
your Quadgrow;
Lids for Quadgrow
You can use lids to maintain
warmth and humidity to
help your plants grow.
Open the vents to decrease
humidity while giving young
plants the protection they
need.
Remove the lids once the
weather has warmed up.
Support Frames
Use a Support Frame
to support your plants,
keeping them on the
straight and narrow.
Holiday Watering Kit for
Chilligrow and Quadgrow
A 25 litre reservoir and
water level regulator
which simply links to your
planter keeping it watered
for longer. Includes all
connectors and clear
instructions.
Your planter was
designed and made
by us in Lancashire,
where we also
grow bananas!

Any Questions? Contact our Gardening Angels
We are here to help you get the best from your plants, so if you have any
questions about your Greenhouse Sensation product or the plants you
are growing, feel free to contact one of our Gardening Angels.
Call: 0845 602 3774
Email: [email protected]
‘Like’ Us For hints, tips and offers search
‘Greenhouse Sensation’ and click ‘Like’
Made in England
by Greenhouse Sensation
Thank you for supporting independent
British manufacturing
1137•QGCG0114
“Award Winning Products made in England
and 5 star rated service.”