GreenWorks GPW 1702 User manual

1700 PSI / 1.2 GPM
ELECTRIC PRESSURE WASHER
GPW 1702
Read all safety rules and instructions carefully before operating this tool.
www.greenworkstools.com
OPERATOR’S MANUAL
TOLL-FREE HELPLINE: 1-888-90WORKS (888.909.6757)

EN - 2
INSTRUCTION
Imporatant Safety Instructions………………………………………………………........................................3
Specific Safety Rules………………………………………………………………........................................4-5
Symbols………………………………………………………………………………......................................6-7
Electrical………………………………………………………………………………........................................8
Know Your Pressure Washer………………………………………………………….......................................9
Packing List..............................................................................................................................................10
Assembly………………………………………………………………………………................................11-14
Operation………………………………………………………………………………................................15-19
Maintenance…………………………………………………………………………..................................20-22
Troubleshooting……………………………………………………………………….................................23-25
Warranty……………………………………………………………………………………...............................26
Exploded View…………………………………………………………………………................................….27
Parts List…………………………………………………………………………………...................................28
PRODUCT SPECIFICATION
Universal Motor……………………………………………………….................................120V,60Hz,13Amps
Max. Pounds Per Square Inch Pressure…………………………………….......................................1700psi
Rated Gallons Per Minute……………………………………………………….....................................1.2gpm
Maximum Inlet Water Temperature……………………………………………..…….................104°F（40℃）Cleaning Units...............................................................................................................................2040 C.U
Unit Weight……………………………………………………………..........................................17.66lbs(8kg)

EN - 3
IMPORTANT SAFETY INTRODUCTIONS
W A R N I N G
Read and understand all instructions. Failure to follow all instructions listed below may result in electric
VKRFN¿UHDQGRUVHULRXVSHUVRQDOLQMXU\
W A R N I N G
When using this product, basic precaution should always be followed, including the following.
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT
Ŷ 7RUHGXFHWKHULVNRILQMXU\FORVHVXSHUYLVLRQLVQHFHVVDU\ZKHQDSURGXFWLVXVHGQHDUFKLOGUHQ
ŶBe thoroughly familiar with controls. Know how to stop the product and release pressure quickly.
ŶStay alert and exercise control. Watch what you are doing and use common sense. Do not operate the
product when you are tired. Do not rush.
ŶDo not operate the product while under the influence of drugs, alcohol, or any medication.
ŶKeep the area of operation clear of all people, particularly small children, and pets.
ŶDon’t overreach or stand on unstable support. Keep proper footing and balance at all times.
ŶFollow the maintenance instructions specified in this manual.
W A R N I N G
5LVNRILQMHFWLRQRULQMXU\±'RQRWGLUHFWGLVFKDUJHVWUHDPDWSHRSOHRUDQLPDOV
GROUND FAULT CIRCUIT INTERRUPTER PROTECTION
This pressure washer is provided with a ground fault circuit interrupter (GFCI) built into the plug of the
power supply cord. This device provides additional protection from the risk of electric shock. Should
replacement of the plug or cord become necessary, use only identical replacement parts that include
GFCI protection.
SERVICING OF A DOUBLE-INSULATED APPLIANCE
In a double-insulated product, two systems of insulation are provided instead of grounding. No
grounding means is provided on a double-insulated product, nor should a means for grounding be
added to the product. Servicing a double insulated product requires extreme care and knowledge of the
system, and should be done only by qualified service personnel. Replacement parts for a double
insulated product must be identical to the parts they replace. A double insulated product is marked with
the words “DOUBLE INSULATION” or “DOUBLE INSULATED.”The symbol may also be marked on
the product.
EXTENSION CORDS
ŶDo not use with extension cord. Plug directly into receptacle.
W A R N I N G
To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with
wet hands.

EN - 4
SPECIFIC SAFETY RULES
ŶKnow your product. Read the operator’s manual carefully. Learn the machine’s applications and
limitations as well as the specific potential hazards related to this product.
ŶTo reduce the risk of injury, keep children and visitors away. All visitors should wear safety
glasses and be kept a safe distance from the work area.
ŶUse the right product for the job.'RQ¶WIRUFHWKHSURGXFWRUWKHDWWDFKPHQWVWRGRDMRELWZDVQRW
designed for. Don’t use it for a purpose not intended.
ŶDress properly.'RQRWZHDUORRVHFORWKLQJJORYHVQHFNWLHVRUMHZHOOHU\7KH\FDQJHWFDXJKWDQG
draw you into moving parts. Rubber gloves and nonskid footwear are recommended when working
outdoors. Also wear protective hair covering to contain long hair.
ŶDo not operate the equipment while barefoot or when wearing sandals or similar lightweight
footwear. Wear protective footwear that will protect your feet and improve your footing on slippery
surfaces.
ŶExercise caution to avoid slipping or falling.
ŶAlways wear eye protection with side shields marked to comply with ANSI Z87.1. Following
WKLVUXOHZLOOUHGXFHWKHULVNRIVHULRXVSHUVRQDOLQMXU\
ŶUse only recommended accessories.7KHXVHRILPSURSHUDFFHVVRULHVPD\FDXVHULVNRILQMXU\
ŶCheck damaged parts. Before further use of the product, all parts should be carefully checked to
determine that they will operate properly and perform their intended function. Check for alignment
of moving parts, binding of moving parts, breakage of parts, mounting, and any other conditions that
may affect its operation. A guard or other part that is damaged must be properly repaired or replaced
E\DQDXWKRUL]HGVHUYLFHFHQWHUWRDYRLGULVNRISHUVRQDOLQMXU\
ŶNever leave product running unattended. Turn power off. Do not leave the product until it comes
to a complete stop.
ŶKeep the motor free of grass, leaves, or grease to reduce the chance of a fire hazard.
ŶFollow manufacturer’s recommendations for safe loading, unloading, transport, and storage
of machine.
ŶKeep product dry, clean, and free from oil and grease. Always use a clean cloth when cleaning.
Never use brake fluids, gasoline, petroleum-based products, or any solvents to clean product.
ŶCheck the work area before each use.5HPRYHDOOREMHFWVVXFKDVURFNVEURNHQJODVVQDLOVZLUH
or string which can be thrown by the machine.
ŶDo not use product if switch does not turn it off. Have defective switches replaced by an
authorized service center.
ŶAvoid dangerous environment. Don’t expose to rain. Keep work area well lit.
ŶDo not abuse the cord. Never use the cord to carry the product or to disconnect the plug from
an outlet. Keep cord away from heat, oil, sharp edges, or moving parts. Replace damaged cords
immediately. Damaged cords increase the risk of electric shock.
ŶGround Fault Circuit Interrupter (GFCI) protection should be provided on the circuit(s) or
outlet(s) to be used for the product.Receptacles are available having built-in GFCI protection and
may be used for this measure of safety.
ŶTo reduce the risk of electric shock, this product has a polarized plug (one blade is wider
than the other) and will require the use of a polarized extension cord. The plug will fit into a
polarized extension cord only one way. If the plug does not fit fully into the extension cord, reverse
the plug. If the plug still does not fit, obtain a correct polarized extension cord. A polarized extension
cord will require the use of a polarized wall outlet. This plug will fit into the polarized wall outlet only
one way. If the plug does not fit fully into the wall outlet, reverse the plug. If the plug still does not
fit, contact a qualified electrician to install the proper wall outlet. Do not change the equipment plug,
extension cord receptacle, or extension cord plug in any way.

EN - 5
SPECIFIC SAFETY RULES
ŶMake sure your extension cord is in good condition. When using an extension cord, be sure to
use one heavy enough to carry the current your product will draw. A wire gauge size (A.W.G.) of
at least 14 is recommended for an extension cord 25 feet or less in length. If in doubt, use the next
heavier gauge. The smaller the gauge number, the heavier the cord. An undersized cord will cause
a drop in line voltage resulting in loss of power and overheating.
ŶInspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free
from oil or grease.
ŶNever direct a water stream toward people or pets, or any electrical device.
ŶBefore starting any cleaning operation, close doors and windows. Clear the area to be cleaned
RIGHEULVWR\VRXWGRRUIXUQLWXUHRURWKHUREMHFWVWKDWFRXOGFUHDWHDKD]DUG
ŶDo not use acids, alkalines, solvents, flammable material, bleaches, or industrial grade
solutions in this product. 7KHVHSURGXFWVFDQFDXVHSK\VLFDOLQMXULHVWRWKHRSHUDWRUDQG
irreversible damage to the machine.
W A R N I N G
High pressure jets can be dangerous if subject to misuse.7KHMHWPXVWQRWEHGLUHFWHGDWSHRSOH
animals, electrical devices, or the machine itself.
ŶKeep the motor away from flammables and other hazardous materials.
ŶCheck bolts and nuts fixing the pressure washer shell for looseness before each use. A loose
bolt or nut may cause serious motor problems.
ŶBefore storing, allow the motor to cool.
ŶWhen servicing use only identical replacement parts. Use of any other parts may create a
hazard or cause product damage.
ŶONLY use cold water.
ŶMake sure minimum clearance of 3 feet is maintained from combustible materials.
ŶConnect pressure washer only to an individual branch circuit.
ŶHold the handle and wand securely with both hands. Expect the trigger handle to move when
WKHWULJJHULVSXOOHGGXHWRUHDFWLRQIRUFHV)DLOXUHWRGRVRFRXOGFDXVHORVVRIFRQWURODQGLQMXU\WR
yourself and others.
ŶSave these instructions. Refer to them frequently and use them to instruct other users. If you loan
someone this product, loan them these instructions also.
W A R N I N G
Some dust created by power sanding, sawing, grinding, drilling, and other construction activities
contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of
these chemicals are:
/HDGIURPOHDGEDVHGSDLQWV
&U\VWDOOLQHVLOLFDIURPEULFNVDQGFHPHQWDQGRWKHUPDVRQU\SURGXFWV
$UVHQLFDQGFKURPLXPIURPFKHPLFDOO\WUHDWHGOXPEHU
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment,
VXFKDVWKRVHGXVWPDVNVWKDWDUHVSHFLDOO\GHVLJQHGWR¿OWHURXWPLFURVFRSLFSDUWLFOHV.W A R N I N G
This hose contains chemical(s) including lead, known to the State of California to cause cancer, birth
defects, and other reproductive harm. Do not drink water from this hose. Wash hands after use.

EN - 6
SYMBOLS
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME '(6,*1$7,21(;3/$1$7,21
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
no No Load Speed Rotational speed, at no load
Alternating Current Type of current
PLQ Per Minute Revolutions, strokes, surface speed, orbits
etc., per minute
Class II Construction Double-insulated construction
Safety Alert ,QGLFDWHVDSRWHQWLDOSHUVRQDOLQMXU\KD]DUG
Read Operator’s Manual
7RUHGXFHWWKHULVNRILQMXU\XVHUPXVWUHDG
and understand operator’s manual before
using this product.
Eye Protection Always wear eye protection with side shields
marked to comply with ANSI Z87.1.
Wet Conditions Alert Do not expose to rain or use in damp
locations.
5LVNRI,QMHFWLRQ
7RUHGXFHWKHULVNRILQMHFWLRQRULQMXU\QHYHU
direct a water system towards people or pets
or place any body part in the stream. Leaking
hoses and fittings are also capable of causing
LQMHFWLRQLQMXU\'RQRWKROGKRVHVRUILWWLQJV
Kickback
7RUHGXFHWKHULVNRILQMXU\IURPNLFNEDFN
hold the spray wand securely with both hands
when the machine is on.
Electric Shock Failure to use in dry conditions and to
observe safe practices can result in electric
shock.
Chemical Burns
7RUHGXFHWKHULVNRILQMXU\RUGDPDJH'2
NOT USE ACIDS, ALKALINES, BLEACHES,
SOLVENTS, FLAMMABLE MATERIAL, OR
INDUSTRIAL GRADE SOLUTIONS in this
product.

EN - 7
SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated
with this product.
SYMBOL SIGNAL MEANING
DANGER Indicates an imminently hazardous situation, which, if not
DYRLGHGZLOOUHVXOWLQGHDWKRUVHULRXVLQMXU\
WARNING Indicates a potentially hazardous situation, which, if not
DYRLGHGFRXOGUHVXOWLQGHDWKRUVHULRXVLQMXU\
CAUTION Indicates a potentially hazardous situation, which, if not
DYRLGHGPD\UHVXOWLQPLQRURUPRGHUDWHLQMXU\
CAUTION (Without Safety Alert Symbol) Indicates a situation that may
result in property damage.
SERVICE
6HUYLFLQJUHTXLUHVH[WUHPHFDUHDQGNQRZOHGJHDQGVKRXOGEHSHUIRUPHGRQO\E\DTXDOL¿HG
service technician. For service, return the product to your nearest AUTHORIZED
SERVICE CENTER for repair. When servicing, use only identical replacement parts.
W A R N I N G
7RDYRLGVHULRXVSHUVRQDOLQMXU\GRQRWDWWHPSWWRXVHWKLVSURGXFWXQWLO\RXUHDGWKRURXJKO\DQG
understand completely the operator’s manual. If you do not understand the warnings and instructions in
the operator’s manual, do not use this product. Call GREENWORKS customer service for assistance.
7KHRSHUDWLRQRIDQ\SRZHUWRROFDQUHVXOWLQIRUHLJQREMHFWVEHLQJWKURZQLQWR\RXUH\HV
which can result in severe eye damage. Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and, when needed, a full face shield. We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with
side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

EN - 8
ELECTRICAL
W A R N I N G
The double insulated system is intended to protect the user from shock resulting from a break in the
product’s internal insulation. Observe all normal safety precautions to avoid electrical shock.
DOUBLE INSULATED
Double insulation is a concept in safety in electric power tools, which eliminates the need for the usual
three-wire grounded power cord. All exposed metal parts are isolated from the internal metal motor
components with protecting insulation. Double insulated products do not need to be grounded.
NOTE: Servicing of a product with double insulation requires extreme care and knowledge of the
system and should be performed only by a qualified service technician. For service, we suggest you
return the product to your nearest authorized service center for repair. Always use identical replacement
parts when servicing.
ELECTRICAL CONNECTION
This product has a precision-built electric motor. It should be connected to a power supply that is 120
volts, 60 Hz, AC only (normal household current). Do not operate this product on direct current (DC). A
substantial voltage drop will cause a loss of power and the motor will overheat. If the product does not
operate when plugged into an outlet, double check the power supply.
GROUND FAULT CIRCUIT INTERRUPTER
This unit is equipped with a Ground Fault Circuit Interrupter (GFCI), which guards against the hazards
RIJURXQGIDXOWFXUUHQWV$QH[DPSOHRIJURXQGIDXOWFXUUHQWLVWKHFXUUHQWWKDWZRXOGÀRZWKURXJKD
person who is using an appliance with faulty insulation and, at the same time, is in contact with an
HOHFWULFDOJURXQGVXFKDVDSOXPELQJ¿[WXUHZHWÀRRURUHDUWK*)&,SOXJVGRQRWSURWHFWDJDLQVWVKRUW
circuits, overloads, or shocks.
Fig. 1
Power Cord
Drip Loop

EN - 9
KNOW YOUR PRESSURE WASHER
The safe use of this product requires an understanding of the information on the tool and in this
RSHUDWRU¶VPDQXDODVZHOODVDNQRZOHGJHRIWKHSURMHFW\RXDUHDWWHPSWLQJ%HIRUHXVLQJWKLVSURGXFW
familiarize yourself with all operating features and safety rules. (See Figure 2.)
DETERGENT TANK
Used for the application of pressure washer detergent.
GFCI PLUG
The pressure washer is equipped with a GFCI plug to guard against the hazards of ground fault
currents. This plug does not protect against short circuits, overloads, or shocks.
HIGH PRESSURE HOSE STORAGE
Reel the high pressure hose up in order to store the hose when not in use.
ON / OFF SWITCH
This switch turns the pressure washer on and off.
TRIGGER HANDLE
The trigger handle has a gripping surface that provides added control of the spray wand and helps
reduce fatigue.
TRIGGER WITH LOCK-OUT
Pulling the trigger releases a stream of water for high pressure cleaning. The lock-out provides
protection against accidental start up.
WATER INTAKE
Attach the garden hose to the water intake.
WATER OUTLET
Attach the High Pressure Hose to the water outlet.
Trigger with Lock-out
Wheel
Handle
GFCI
High Pressure Hose
212))6ZLWFK
Water Intake
Water Outlet
Trigger Handle
Fig. 2
Detergent Tank
Spray Tips

EN - 10
PACKING LIST
PART NAME ERP NO. FIGURE QTY
Pressure Washer
(including the spray tips)
1
7ULJJHU+DQGOH 321091835 1
:DQG$VVHPEO\ 312011639 1
ft. High Pressure Hose 31103973 1
'HWHUJHQW7DQN 31111368 1
Spray Tip Cleaning Tool 33201671 1
Gun holder 341231630 1
4XLFN6WDUW*XLGH 388011835
120S
120S

DoNot Return to Store
Call: 1-888-909-6757
www.GreenWorksTools.com
01
INSTALLINGDETERGENT BOTTLE
Insert the male end of the bottle into the female outlet on the
triggerhandle.
While pushing in the bottle firmly, turn clockwise until tabs lock
intoplace to ensure a leak-free connection.
Unscrew the bottle from the assembly and fill with pressure
washerdetergents/soaps only.
SPRAYTIP SPRAYTIPAPPLICATION
25
O
Green- Narrow fan tip (25° )
The green pressure washer tip provides high versatility with its
25degree angle tip. Referred to as the washing tip, because it
providesadequate pressure to remove dirt from surfaces, but is
designedto not damage many surfaces. This pressure washer tip is
designedfor “sweeping” foliage or debris given its wide angle. This
tipis versatile due to its wide area of cleaning and strong pressure
application.
40
O
White- Wide fan tip (40° )
The white 40 degree tip, referred to as the “fan” tip creates the
widestarea of cleaning with relatively low pressure. This pressure
washertip is best used for light or delicate cleaning applications. It
isrecommended for light cleaning on wood decks and other soft or
delicatesurfaces.


        

      


120 
 



 
IMPORTANT: 


NOTE:
AUTO ON/O FF SWI TCH : T his Pr essu re wa sher i s
equippedwith an Auto Start/Stop feature.
Tooperate: Turnthe power switch to the On (I) position.
Pumpwill pressurize and shut down immediately.
Once the trigger of the gun is depressed the u nit will
turnon. Unit will shut off and be in standby mode when
triggeris released.
1700 PSI / 1.2 GPM
ELECTRIC PRESSURE WASHER
GPW 1702
S 

WARNING:
Set-up
Insert the gun holder into the slot until it locks
intoits tabs.

2

ull back the quick-connect collar
ush the spray tip into place
ush the collar forward
ONNETINGDESIRED SPRA  TIP
     
 
1
4
5
6
7
8
2

1
2SHUDWRU¶V0DQXDO 388021835
1700 PSI / 1.2 GPM
ELECTRIC PRESSURE WASHER
GPW 1702
Read all safety rules and instructions carefully before operating this tool.
www.greenworkstools.com
OPERATOR’SMANUAL
TOLL-FREE HELPLINE: 1-888-90WORKS
(888.909.6757)
1
40°Spray Tip
25°Spray Tip

EN - 11
ASSEMBLY
UNPACKING
This product requires assembly.
ŶCarefully remove the product and any accessories from the box. Make sure that all the contents from
the packaging list are included.
W A R N I N G
Do not use this product if any parts on the Packing List are already assembled to your product when you
unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer
installation. Use of a product that may have been improperly assembled could result in serious personal
LQMXU\
ŶInspect the product carefully to make sure no breakage or damage occurred during shipping.
ŶDo not discard the packing material until you have carefully inspected and satisfactorily operated the
product.
ŶIf any parts are damaged or missing, please call 1-888-909-6757 for assistance.
W A R N I N G
If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this
SURGXFWZLWKGDPDJHGRUPLVVLQJSDUWVFRXOGUHVXOWLQVHULRXVSHUVRQDOLQMXU\
W A R N I N G
Do not connect to power supply until assembly is complete. Failure to comply could result in accidental
VWDUWLQJDQGSRVVLEOHVHULRXVSHUVRQDOLQMXU\
W A R N I N G
Do not attempt to modify this product or create accessories not recommended for use with this product.
Any such alteration or modification is misuse and could result in a harzardous condition leading to
SRVVLEOHVHULRXVSHUVRQDOLQMXU\

EN - 12
ASSEMBLY
ASSEMBLING THE GUN HOLDER (See Figure 3.)
ŶInsert the gun holder into the slot until it locks into its tabs.
ASSEMBLING THE PRESSURE WASHER GUN
ŶInsert the male end (A) of the wand into the female bayonet outlet (B) firmly. (See Figure 4-1.)
ŶWhile pushing in the wand firmly, turn clockwise until tabs lock into place to ensure a leak-free
connection. (See Figure 4-2.)
Fig. 4-1 Fig. 4-2
A
B
Fig. 3

EN - 13
ASSEMBLY
CONNECTING HIGH PRESSURE HOSE TO THE TRIGGER HANDLE (See Figure 5.)
ŶConnect the high pressure hose to the pressure washer gun assembly by turning the fitting clockwise.
Ensure the fitting is fully tightened to the pressure washer gun.
NOTE: For easier installation of the hose to the unit or trigger it is suggested to add pressure washer or
dish detergent to the rubber seal at each end of the hose. This will allow for easier installation and a snug
fit.
DETERGENT TANK
ŶInsert the male end of the bottle into the female outlet on the trigger handle. (See Figure 6-1.)
ŶWhile pushing in the bottle firmly, turn clockwise until tabs lock into place to ensure a leak-free
connection. (See Figure 6-2.)
Ŷ 8QVFUHZWKHERWWOHIURPWKHDVVHPEO\DQGILOOZLWKSUHVVXUHZDVKHUGHWHUJHQWVVRDSVRQO\
Fig. 6-2
Fig. 6-1
High Pressure Hose
Collar
Inlet Coupler Fig. 5

EN - 14
ASSEMBLY
CONNECTING THE GARDEN HOSE (See Figure 7.)
C A U T I O N :
Always observe all local regulations when connecting hoses to the water main. Some areas have
restrictions against connecting directly to public drinking water supply to prevent the feedback of
FKHPLFDOVLQWRWKHGULQNLQJZDWHUVXSSO\'LUHFWFRQQHFWLRQWKURXJKDUHFHLYHUWDQNRUEDFNÀRZ
preventer is usually permitted.
The water supply must come from a water main. NEVER use hot water or water from pools, lakes, etc.
Before connecting the garden hose:
ŶUncoil the garden hose.
ŶRun the water hose until a steady stream of water appears to clean any debris from the hose.
ŶInspect the screen in the water intake for any damage or build up of debris.
ŶIf the screen is damaged, do not use the machine until the screen has been replaced.
ŶIf the screen is dirty, clean it before connecting the garden hose to the machine.
ŶWith the hose faucet turned completely off, attach the end of the garden hose to the water intake.
Tighten by hand.
W A R N I N G
Always ensure that the garden hose is connected to the unit and that the faucet is turned on, before the
power to the unit is switched on. Pump damage will occur if these steps are not followed.
Fig. 7

EN - 15
OPERATION
W A R N I N G
Do not allow familiarity with the product to make you careless. Remember that a careless fraction of a
VHFRQGLVVXI¿FLHQWWRLQÀLFWVHULRXVLQMXU\
W A R N I N G
Never direct a water stream toward people or pets, or any electrical device. Failure to heed this warning
FRXOGUHVXOWLQVHULRXVLQMXU\
APPLICATIONS
You may use this product for the purposes listed below:
Cleaning cars, boats, motorcycles, outdoor furniture, grills, and house siding.
ADDING DETERGENT TO THE PRESSURE WASHER (See Figure 8.)
Use only detergents designed for pressure washers; household detergents, acids, alkalines, bleached,
VROYHQWVÀDPPDEOHPDWHULDOVRULQGXVWULDOJUDGHVROXWLRQVFDQGDPDJHWKHSXPS
Many detergents may require mixing prior to use. Prepare cleaning solution as instructed on the
solution bottle.
ŶUnscrew the bottle from the soap applicator.
ŶPlace the bottle on the ground or other stable surface.
ŶFill with pressure washer detergent.
ŶScrew the bottle back onto the soap applicator.
ŶAttach the soap applicator to the trigger handle
NOTE: Use a funnel, if needed, to prevent accidental spilling of the detergent outside the tank. If
DQ\GHWHUJHQWLVVSLOOHGGXULQJWKH¿OOLQJSURFHVVPDNHVXUHWKHXQLWLVFOHDQHGDQGGULHGEHIRUH
proceeding.
Fig. 8

EN - 16
OPERATION
STARTING AND STOPPING THE PRESSURE WASHER
CAUTION :
Do not run the pump without the water supply connected and turned on.
ŶConnect the garden hose.
ŶTurn the garden hose on then squeeze the high pressure trigger to relieve air pressure. Once a steady
stream of water appears, release the trigger.
Ŷ $IWHUHQVXULQJWKH2Q2IIVZLWFKLVLQWKH2))SRVLWLRQFRQQHFWWKHSUHVVXUHZDVKHUWRWKHSRZHU
supply.
ŶPlug the pressure washer into the outlet and ensure the light on the GFCI is on, the unit is ready for
operation.
Ŷ 6ZLWFKWKHSUHVVXUHZDVKHUWRWKH,21SRVLWLRQWRVWDUWWKHPRWRU
Ŷ 7RVWRSWKHPRWRUUHOHDVHWKHWULJJHUDQGWXUQWKHVZLWFKWRWKH2))SRVLWLRQ
W A R N I N G
Hold the handle and wand securely with both hands. Expect the trigger handle to move when the trigger
LVSXOOHGGXHWRUHDFWLRQIRUFHV)DLOXUHWRGRVRFRXOGFDXVHORVVRIFRQWURODQGLQMXU\WR\RXUVHOIDQG
others.
NOTE: AUTO ON/OFF SWITCH: This Pressure washer is equipped with an Auto Start/Stop
feature.
To operate: Turn the power switch to the On (I) position. Pump will pressurize and shut down
immediately. Once the trigger of the gun is depressed the unit will turn on. Unit will shut off and
be in standby mode when trigger is released.
SOAP APPLICATION
Soap is applied under low pressure high volume for optimum performance.
Soap can not be applied under high pressure with this machine
6RDS'HWHUJHQWFDQRQO\EHDSSOLHGZLWKWKLVPDFKLQHZKHQWKHGHWHUJHQWWDQNLVLQVWDOOHG

EN - 17
OPERATION
USING THE SPRAY WAND TRIGGER
For greater control and safety, keep both hands on the pressure washer gun at all times.
Ŷ3XOOEDFNDQGKROGWKHWULJJHUWRRSHUDWHWKHSUHVVXUHZDVKHU
Ŷ5HOHDVHWKHWULJJHUWRVWRSWKHÀRZRIZDWHUWKURXJKWKHVSUD\ZDQG
TO ENGAGE THE LOCK-OUT (See Figure 9-1.)
ŶPush up on the lock-out until it clicks into the slot. This will prevent any unintentional starts of the
pressure washer.
TO DISENGAGE THE LOCK-OUT (See Figure 9-2.)
ŶPush the lock-out down and into its original position. For the most effective cleaning, the spray tip
should be between 8 in. and 24 in. from the surface to be cleaned. If the spray is too close it can
damage the cleaning surface.
Fig. 9-2
Fig. 9-1
Locked Unlocked
W A R N I N G
Do not slide lock-out button when you have the trigger at back position.

EN - 18
OPERATION
CHANGING THE SPRAY TIP (See Figure 10.)
W A R N I N G
NEVER change spray tips without engaging the lock-out on the trigger handle and NEVER point the
ZDQGDW\RXUIDFHRUDWRWKHUV7KHTXLFNFRQQHFWIHDWXUHFRQWDLQVVPDOOVSULQJVWKDWFRXOGHMHFWWKH
VSUD\WLSZLWKVRPHIRUFH)DLOXUHWRKHHGWKLVPD\FDXVHSHUVRQDOLQMXU\
ŶTurn off the pressure washer and shut off the water supply. Pull trigger to release water pressure.
ŶEngage the lock-out on the trigger handle by pushing the trigger lock button into the slot.
ŶPull back the quick-connect collar on the spray wand.
ŶPush the spray tip into place in the spray wand.
ŶPush the collar forward so that the spray tip is secured properly. Check to see that the spray tip is
secure.
SPRAY TIP APPLICATION
25O
Green - Narrow fan tip (25° )
ŶThe green pressure washer tip provides high versatility with its 25 degree angle
tip. Referred to as the washing tip, because it provides adequate pressure to
remove dirt from surfaces, but is designed to not damage many surfaces. This
pressure washer tip is designed for “sweeping” foliage or debris given its wide
angle. This tip is versatile due to its wide area of cleaning and strong pressure
application.
40O
White - Wide fan tip (40° )
ŶThe white 40 degree tip, referred to as the “fan” tip creates the widest area of
cleaning with relatively low pressure. This pressure washer tip is best used for
light or delicate cleaning applications. It is recommended for light cleaning on
wood decks and other soft or delicate surfaces.
Fig. 10
1
2
3
Spray Tip
Spray Wand
1-Pull back the quick-connect collar
2-Push the spray tip into place
3-Push the collar forward

EN - 19
OPERATION
OPERATING THE PRESSURE WASHER (See Figure 11.)
Use only detergents designed for pressure washers.
Soap is applied under low pressure high volume for optimum performance.
Soap can not be applied under high pressure with this machine.
To clean:
ŶInstall the soap attachment on the trigger handle.
ŶStart the pressure washer and spray the detergent on a dry surface using long, even,
overlapping strokes. To prevent streaking, do not allow detergent to dry on the surface.
To rinse:
ŶUsing the desired tip, spray away from the rinsing surface for approximately 10 seconds to allow any
remaining detergent to be flushed from the line.
ŶStart at the top of the area to be rinsed and work down, overlapping the strokes.
MOVING THE PRESSURE WASHER
To move the pressure washer:
ŶTurn the pressure washer off. Point the spray wand in a safe direction and pull trigger to release
water pressure.
ŶTilt the machine toward you until it balances on the wheels then roll the machine to the desired
position.
Fig. 11

EN - 20
MAINTENANCE
W A R N I N G
When servicing, use only identical replacement parts. Use of any other parts may create a hazard or
cause product damage.
W A R N I N G
Before inspecting, cleaning or servicing the machine,turn off the unit, unplug from the outlet, pull trigger
to release water pressure and disconnect the high pressure hose. Failure to follow these instructions
FDQUHVXOWLQVHULRXVSHUVRQDOLQMXU\RUSURSHUW\GDPDJH
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various
types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust,
oil, grease, etc.
W A R N I N G
'RQRWDWDQ\WLPHOHWEUDNHÀXLGVJDVROLQHSHWUROHXPEDVHGSURGXFWVSHQHWUDWLQJRLOVHWFFRPH
in contact with plastic parts. Chemicals can damage, weaken or destroy plastic which may result in
VHULRXVSHUVRQDOLQMXU\
Only the parts shown on the parts list are intended to be repaired or replaced by the customer.
All other parts should be replaced at an authorized service center.