GRITAL A1-W User manual

A1 - W
Metal Standalone Waterproof IP68
Access Control
Code : 3001014
User Manual
Please read the manual carefully before use this unit

1. Packing List
Name Quantity Remarks
A1-W Access Control 1
User manual 1
Screw driver 1 φ20mmx60mm,Special for keypad
Rubber plug 2 φ6mmx30 mm, used for fixing
Self tapping screws 2 φ4mmx28 mm, used for fixing
Star screws 1 φ3mmx6mm, used for fixing
Please ensure that all the above contents are correct. If any are missing please
notify the supplier of the unit.
2. Quick Reference Programming Guide
To enter the programming mode
999999 is the default factory master code
To exit from the programming mode
Note that to undertake the following programming the master user must be logged in
To change the master code
To add a PIN user.
To add a card user
1 : User ID number : # : PIN : #
T he ID number is any number between 1 & 2000.
T he PIN is any four digits between 0000 & 9999 with the
exception of 1234 which is reserved.
Users can be added continuously without exiting programming mode.
1 : Read Card : #
Cards can be added continuously without
exiting programming mode.
To delete a PIN or a card user.
2 : User ID Number : #
for a PIN user
or
2 : Read Card : #
for a card user
Users can be deleted continuously without exiting
programming mode.
To unlock the door for a PIN user
Enter the PIN then press #
To unlock the door for a card user Present the card
TEL. +30 2105063188 www.grital.eu e-mail: [email protected]
Address : Riga Fereu 40, ILION, postal code 13121, Athens, Greece
*: Master Code : #
0 : New Code : # : New Code : #
The master code can be 6 to 8 digits
*
GRITAL ACCESS CONTROL

GRITAL ACCESS CONTROL
3.
Description
The unit is single door multifunction standalone access controller or a Wiegand
output keypad or card reader. It is suitable for mounting indoor or outdoor. It
is housed in a strong, sturdy and vandal proof Zinc Alloy electroplated case which
is available in either a bright silver or matt silver finish. The electronics are fully
potted so the unit is waterproof and conforms to IP68. This unit supports up to
2000 users in either a Card,
4 digit PIN, or a Card + PIN option. The inbuilt card reader supports 125KHZ EM
cards, 13.56MHz Mifare cards. The unit has many extra features including lock
output current short circuit protection, Wiegand output , and a backlight keypad.
These features make the unit an ideal choice for door access not only for small
shops and domestic households but also for commercial and industrial applications
such as factories, warehouses, laboratories, banks and prisons.
4.
Features
Waterproof, conforms to IP68
Strong Zinc Alloy Electroplated anti-vandal case
Full programming from the keypad
2000 uses, supports Card, PIN, Card + PIN
Can be used as a stand alone keypad
Backlight keys
Wiegand 26 input for connection to external reader
Wiegand 26 output for connection to a controller
Adjustable Door Output time, Alarm time, Door Open time
Very low power consumption (30mA)
Fast operating speed, <20ms with 2000 users
Lock output current short circuit protection
Easy to install and program
Built in light dependent resistor (LOR) for anti tamper
Built in buzzer
Red, Yellow and Green LEDS display the working status
5. Specifications
TEL. +30 2105063188 www.grital.eu e-mail: [email protected]
Address : Riga Fereu 40, ILION, postal code 13121, Athens, Greece

Colour Function Description

OPEN
D_IN
GND
ALARM
NO
NC
Connect
ll
---a o

8. To Reset to Factory Default
9. Anti Tamper Alarm
1 O.Sound and Light indication
11. Detailed Programming Guide
11.1 User Settings

w
�

the

12.The unit operating as a Wiegand Output Reader

•
• □
• □
□
□
•
•
•
Connect
This manual suits for next models
1
Table of contents
Other GRITAL IP Access Controllers manuals
Popular IP Access Controllers manuals by other brands

Star
Star RFL100C Quick installation guide

Vanderbilt
Vanderbilt ACTpro-1500 Installation and operating instructions

Anviz
Anviz C2 quick guide

Home Automation
Home Automation HAI manual

Trigon
Trigon Miniguard HF-2 Series Installation and operational instructions

Honeywell
Honeywell IdentIPoint installation instructions