Grizzly G0571 Instruction Manual

The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 1 OF 3Model G0571
MACHINE DATA
SHEET
Customer Service #: [phone] · To Order Call: [phone] · Fax #: [phone]
MODEL G0571 37" WIDE-BELT SANDER, SINGLE-PHASE
Product Dimensions:
Weight............................................................................................................................................................ 1640 lbs.
Length/Width/Height.................................................................................................................53 x 49-1/2 x 69-1/2 in.
Foot Print (Length/Width)....................................................................................................................... 51-1/2 x 19 in.
Shipping Dimensions:
Type....................................................................................................................................................Wood Slat Crate
Content............................................................................................................................................................Machine
Weight............................................................................................................................................................ 1818 lbs.
Length/Width/Height............................................................................................................................. 53 x 56 x 74 in.
Electrical:
Switch..................................................................................................................................... On/Off Emergency Stop
Switch Voltage......................................................................................................................................................220V
Minimum Circuit Size........................................................................................................................................ 60 amp
Plug Included............................................................................................................................................................No
Motors:
Table Elevation
Type..................................................................................................................TEFC Capacitor Start Induction
Horsepower..............................................................................................................................................1/3 HP
Voltage........................................................................................................................................................220V
Prewired......................................................................................................................................................220V
Phase........................................................................................................................................................Single
Amps...............................................................................................................................................................3A
Speed.................................................................................................................................................1725 RPM
Cycle..........................................................................................................................................................60 Hz
Number Of Speeds........................................................................................................................................... 1
Power Transfer .........................................................................................................................................V-Belt
Bearings..........................................................................................................................Sealed and Lubricated
Sanding
Type..................................................................................................................TEFC Capacitor Start Induction
Horsepower...............................................................................................................................................10 HP
Voltage........................................................................................................................................................220V
Prewired......................................................................................................................................................220V
Phase........................................................................................................................................................Single
Amps.............................................................................................................................................................50A
Speed.................................................................................................................................................1725 RPM
Cycle..........................................................................................................................................................60 Hz
Number Of Speeds........................................................................................................................................... 1
Power Transfer ...............................................................................................................................Triple V-Belt
Bearings..........................................................................................................................Sealed and Lubricated

The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 2 OF 3Model G0571
Conveyor
Type..................................................................................................................TEFC Capacitor Start Induction
Horsepower.................................................................................................................................................1 HP
Voltage........................................................................................................................................................220V
Prewired......................................................................................................................................................220V
Phase........................................................................................................................................................Single
Amps...............................................................................................................................................................7A
Speed.................................................................................................................................................1725 RPM
Cycle..........................................................................................................................................................60 Hz
Number Of Speeds................................................................................................................................Variable
Power Transfer .........................................................................................................................................V-Belt
Bearings..........................................................................................................................Sealed and Lubricated
Main Specifications:
Operation Information
No Of Sanding Drums.......................................................................................................................................1
Maximum Board Width.........................................................................................................................36-1/2 in.
Minimum Board Width..................................................................................................................................2 in.
Maximum Board Thickness..........................................................................................................................6 in.
Minimum Board Thickness........................................................................................................................1/8 in.
Minimum Board Length..............................................................................................................................14 in.
Sanding Belt Speed............................................................................................................................2600 FPM
Sanding Belt Oscillations.................................................................................................................. 5/8 - 3/4 in.
Sanding Drums Speed....................................................................................................................... 2600 FPM
Conveyor Feed Rate.......................................................................................................................15 - 49 FPM
Sanding Belt Length...................................................................................................................................60 in.
Sanding Belt Width.....................................................................................................................................37 in.
Drum Information
Infeed Sanding Drum Type..................................................................................................................... Rubber
Infeed Sanding Drum Size........................................................................................................................... 4 in.
Outfeed Sanding Drum Type......................................................................................................................Steel
Outfeed Sanding Drum Size.........................................................................................................................3 in.
Platen Information
Platen Type....................................................................................................................................Graphite/Felt
Platen Length..........................................................................................................................................37.8 in.
Platen Width..............................................................................................................................................3.5 in.
Construction
Conveyor Belt Construction.....................................................................................................................Rubber
Body Construction.......................................................................................................................................Steel
Base Construction.......................................................................................................................................Steel
Paint..........................................................................................................................................................Epoxy
Other Related Information
Floor To Belt Height................................................................................................................................... 32 in.
Belt Tracking......................................................................................................................................Pneumatic
Sanding Belt Tension.........................................................................................................................Pneumatic
No Of Pressure Rollers.....................................................................................................................................2
Pressure Roller Type...............................................................................................................................Rubber
Pressure Roller Size................................................................................................................................1.96 in.
Conveyor Belt Length...........................................................................................................................82-1/2 in.
Conveyor Belt Width............................................................................................................................ 36-1/2 in.
Belt Roller Size.............................................................................................................................................4 in.
No Of Dust Ports...............................................................................................................................................3
Dust Port Size.............................................................................................................................................. 4 in.
Air Requirement....................................................................................................................................... 75 PSI

The information contained herein is deemed accurate as of 10/7/2008 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased. PAGE 3 OF 3Model G0571
Other Specifications:
ISO Factory ...................................................................................................................................................ISO 9001
Country Of Origin ..............................................................................................................................................Taiwan
Warranty ............................................................................................................................................................1 Year
Serial Number Location ......................................................................................... ID Label below Grizzly Nameplate
Assembly Time ...........................................................................................................................................20 minutes
Features:
Digital Read-out and Auto Positioning
Adjustable Sanding Belt Oscillations
Built in Air Filter/Lubricator
Independent Motor Control
Pneumatic Belt Tracking and Tensioning
Amp Meter for Load Measurement
Safety Shut-off Bar
Micro Adjustable Graphite/Felt Platen