Gronomics RGB3T 48-48 User manual

GRONOMICS®
“TOOL FREE ASSEMBLY”
48” x 48” RAISED GARDEN BED –THREE TIER
Parts Check List and Assembly Instructions
STEP I
A) Unpack all of the parts and organize them in ‘like’ stacks. Please read the
instructions in its entirety before beginning assembly.
You should have: Model #RGB3T 48-48
QUANTITY
PART DESCRIPTION
PART #
4
4” x 4” x 18” Corner Post
2300
Parts for the Sides
12
45”x 5½” x 1” Side Rail (One w/logo)
4501, 4501L
Packaged & Inspected by:________________________ Date____________________
NOTE: If you need assistance with parts or have assembly questions, please contact
Customer Service either via email at [email protected] or phone at 763-753-7374.

GRONOMICS®
“TOOL FREE ASSEMBLY”
STEP II
A) Start with two 4” x 4” x 18” corner posts, place
the posts upside down.
B) Slide one 45” x 5½” x 1” side rail between each
post. (see figure 1)
C) Repeat the same process with the other two
4” x 4” x 18” corner posts and another 45” x
5½” x 1” side rail. Make sure the 45” x 5½” x 1”
side rail w/logo is placed upside down in this step.
STEP III
A) Connect the two corner posts by sliding a
45” x 5½” x 1” side rail into each post.
(see figure 2)
B) Slide the remaining eight 45” x 5½” x 1” side
rails into the posts.
STEP IV
A) Turn right side up.
Note: Ground preparation is optional; level area to be planted
before placing bed and filling with soil.
Recommended Finish: A natural oil non film-forming finish designed for Cedar. If Cedar is not finished checking may occur and will
naturally turn a weathered gray color.
1-Year Warranty: All Gronomics®Products are warranted against all manufacturing defects of material or craftsmanship for a period of ONE full
year from date of purchase. Warranty does not cover cracking, damage caused by negligence, alterations or abuse in any way.
(Figure 1)
(Figure 2)
(Figure3)