Gronomics RGB 34-95 User manual

AssemblyInstructionSheet 31-Oct-12
GRONOMICS®
“TOOL FREE ASSEMBLY”
34” x 95” x 13” RAISED GARDEN BED
Parts Check List and Assembly Instructions
STEP I
A) Unpack all of the parts and organize them in ‘like’ stacks. Please read the
instructions in its entirety before beginning assembly.
You should have: Model #RGB 34-95
Model #RGB 34-95S
QUANTITY
PART DESCRIPTION
PART #
4
4” x 4” x 13” Corner Post
1300
2
4” x 4” x 13” Center Post
1302
Parts for the Sides
4
31” x 5½” x 1” Side Rail
3101
6
45” x 5½” x 1” Side Rail
4501
2
45” x 5½” x 1” Side Rail (w/Logo)
4501L
Part for the Center Support
1
31” x 2½” x 1” Narrow Support Rail
3103
Packaged & Inspected by:_______________________ Date____________________
NOTE: If you need assistance with parts or have assembly questions, please contact
Customer Service either via email at [email protected] or phone at 763-753-7374.

AssemblyInstructionSheet 31-Oct-12
GRONOMICS®
“TOOL FREE ASSEMBLY”
Note: Ground preparation is optional, we recommend
leveling area under frame of bed before placing bed
and filling with soil.
STEP II
A) Start with two 4” x 4” x 13” corner posts and
one 4” x 4” x 13” center post, place the posts
upside down.
B) Slide both 45” x 5½” x 1” side rail w/logo upside
down between each post. (see figure 1)
C) Repeat the same process with the other two
4” x 4” x 13” corner posts and the last
4” x 4” x 13” center post.
STEP III
A) Connect the two corner posts by sliding a
31” x 5½” x 1” side rail into each post.
(see figure 2)
B) Slide the remaining four 45” x 5½” x 1” side
rails into the posts.
C) Repeat this step with the remaining two 31” x
5½” x 1” side rails.
STEP IV
A) Slide the 31” x 2½” x 1” narrow support rail
between the two center posts.
B) Turn right side up. (see figure 3)
C) When filling with soil lift the narrow support rail
and center between posts.
(Figure 1)
(Figure 2)
(Figure3)

AssemblyInstructionSheet 31-Oct-12
GRONOMICS®
“TOOL FREE ASSEMBLY”
95 x 80 Raised Garden Bed Trellis Kit
Parts Check List and Assembly Instructions
STEP I
A) Unpack all of the parts and organize them in ‘like’ stacks. Please read the instructions
in its entirety before beginning assembly.
You should have: Model #TK 95-80
Model #TK 95-80S
QUANTITY
PART DESCRIPTION
PART #
Parts
2
Trellis Net
8007
1
4” x 4” x 80” Trellis Post (Left)
7000-Lt
1
4” x 4” x 80” Trellis Post (Right)
7000-Rt
1
4” x 4” x 80” Trellis Center Post
7002
2
45” x 5½” x 1” Side Rail w/Logo Notched Board
4501LN
Packaged & Inspected by:___________________________________ Date____________________
NOTE: If you need assistance with parts or have assembly questions, please contact Customer Service
either via email at [e-mail] or phone at 763-753-7374.
STEP II
A) Slide the right and left trellis posts into the Raised
Garden Bed frame.
B) Slide the center trellis post into the Raised Garden Bed
frame.
C) Slide the two 45” x 5½” x 1” side rail into the posts.
Note: See trellis net assembly instructions.

AssemblyInstructionSheet 31-Oct-12
GRONOMICS®
“TOOL FREE ASSEMBLY”
95 x 80 Raised Garden Bed Trellis Net
Assembly Instructions
NOTE: If you need assistance with parts or have assembly questions, please contact Customer
Service either via email at in[email protected] or phone at 763-753-7374.
STEP II
A) Weave the two 45” x 5½” x 1” side rail through the trellis
net, with the double strand of netting on the top.
(see figure 1)
STEP III
A) Stretch and secure the trellis net across the two 45” x
5½” x 1” side rail and lock into notched end. (see figure 2)
B) Slide the 45” x 5½” x 1” side rail into the Raised Garden
Trellis Posts.
STEP IV
A) Stretch and fasten netting on lower corners Raised
Garden Bed with tacks provided. (see figure 3)
Replacement nets are now available online at:
www.gronomics.com
(Figure 1)
(Figure 2)
(Figure 3)