Gronomics VEGB 24-48 User manual

WWW.gronomics.com EastBethel,MNUSA 763-753-7374
Vinyl Elevated Garden Bed
(2 Tier 24” x 48”) Assembly Instruction
Continued
Parts List
ITEM QTY. PART # DESCRIPTION
1 4 V3200E Corner Post, 4” x 4” x 31”
2 2 V4502 Side Rail w/Cleat, 45-1/2” x 8” x 1”
3 4 V2150 Side Rails, 21x 5-1/2”x 7/8"
4 1 V4550 Side Rail w/Logo, 45-1/2” x 8” x 1”
5 1 V4550 Side Rail, 45-1/2” x 8” x 1”
6 1 V2115 Bottom Board, 22” x 1-1/2” x 1”
7 5 V2200 Bottom Board, 22” x 6” x 1”
8 2 V2200N Corner Notched Bottom Panel, 22” x 6” x 1”
9 1 FL3652 Fabric Liner, 36" x 52"
10 4 4545 Post Cap, 4-5/8” x 4-5/8” x 1-1/2”
Stack matching pieces in piles. Using the parts list,
locate and count the individual pieces and verify that
you have received the correct number of pieces.
If any pieces are missing or replacement parts are
required, contact Gronomics at 1-855-299-6727.
NOTE: Ground preparation is optional, however we
recommend leveling area under frame of product, or
place product directly on a flat level surface before
filling with soil.
Parts Identification Item #: VEGB 24-48
1
12
38
5
4
10
9
7
6
3
Packaged & Inspected by:Date:
Side Rail w/Cleat Assembly
2
Stand one 4” x 4” x 31” corner post (Item 1)
upright with slots facing you and slots facing to
the right.
Locate a 45-1/2” x 8” x 1” side rail w/cleat (Item
2). With the cleat located at the bottom and
facing you, install side rail w/cleat into the lower
slot and push inward until the tabs on the side rail
w/cleat are locked to the corner post.
2
Lower Slot Cleat
1

WWW.gronomics.com EastBethel,MNUSA 763-753-7374
Continued
Install the 45-1/2” x 8” x 1” side rail w/logo (Item 4)
(w/Logo facing away from you) onto the top of side rail
w/cleat.
Slide the side rail w/Logo into the slot on the corner
post until tabs are locked to corner post.
Side Rail Assembly
3
4
Logo Facing Away
Align the 4” x 4” x 31” corner post (Item 1) with slots
facing you and slots facing the ends of the 45-1/2” x 8”
x 1” side rail w/ cleat (Item 2) and 45-1/2” x 8” x 1” side
rail w/Logo (Item 4).
Slide the corner post onto the side rails until the tabs on
the side rails lock to the corner post.
Repeat steps 1 - 4 for the two remaining 4” x 4” x 31”
corner posts, 45-1/2” x 8” x 1” side rail w/cleat and 45-
1/2” x 8” x 1” side rail.
Side Rail Assembly Continued
4
4 1
2
Align two 21-1/2” x 8” x 1” side rails (Item 3) to the 4” x
4” x 31” corner post slots.
Slide the side rails into the corner post slots until the
tabs on the side rails lock to the corner post.
End Rail Assembly
5
3
3
Align the other side rail assembly (as shown).
Align the corner post (Item 1) slots to the 21-1/2” x 8” x
1” side rails (Item 3).
Slide the corner post onto the side rails until the side
rail tabs lock to the corner post.
End Rail / Side Rail Assembly
6
1
Side Rail assembly
3

WWW.gronomics.com EastBethel,MNUSA 763-753-7374
Place the two remaining 21-1/2” x 8” x 1” side rails
(Item 3) together and place between the two 4” x 4” x
31” corner posts (Item 1).
Slide the side rails into each corner post until the tabs
on the side rails lock to the corner posts
Final End And Side Rail Assembly
7
1
3
1
Place one 22” x 5-1/2” x 1-1/2” corner notched bottom
panel (Item 8) on each end of the garden bed.
Corner Notched Bottom Panel Assembly
8
8
Place five 22” x 5-1/2” x 1-1/2” x 1” bottom panels (Item
7) and one 22” x 1-1/2” x 1” bottom panel (Item 6) into
the garden bed.
(Gap boards evenly to allow for water drainage).
Install the 4” x 4” post caps (Item 10) onto the corner
posts.
Place fabric liner into the garden bed.
Bottom Panel And Post Cap Assembly
9
76
10
10
10