Gronomics TK 48-80 User manual

www.gronomics.com East Bethel, MN USA 763-753-7374
Continued
Trellis Kit (48” x 80” H)
Assembly Instruction
1
Parts Identification
Stack matching pieces in piles. Using the parts list,
locate and count the individual pieces and verify that
you have received the correct number of pieces.
If any pieces are missing or replacement parts are
required, contact Gronomics at 1-855-299-6727.
NOTE: Ground preparation is optional, however we
recommend leveling area under frame of product, or
place product directly on a flat level surface before
filling with soil.
12
3
Parts List
ITEM QTY. PART # DESCRIPTION
1 2 8000TP Trellis Post, 4” x 4” x 80”
2 1 4500TL Side Rail, w/Logo Notched Board, 45” x 5-1/2” x 1”
3 1 4880 Trellis Net 48" x 80"
Item #: TK 48-80
Item #: TK 48-48S
Post Assembly
2
Remove one 4” x 4” x 19” post by lifting straight
upward and removing from the garden bed.
Install a 4” x 4” x 80” trellis post (Item 1). Align the
trellis post slots with the side rails and lower trellis
post fully to the ground.
Repeat this procedure for the second trellis post.
1
Remove Posts And Install 4” x 4” x 80” Trellis Posts
Side Rails
Side Rails
Logo
Packaged & Inspected by: Date:
Product Care & Maintenance - Western Red Cedar will turn a weathered grey if left unfinished. Although no finish is required for
cedar products when used outdoors, a natural oil finish applied regularly will help maintain the beauty and minimize cracking and drying. It is
recommended to use Gronomics Garden Bed Oil (Item # GBO-1Q), a non-toxic, food safe finish that is very easy to apply.

www.gronomics.com East Bethel, MN USA 763-753-7374
Net Placement
2
Weave the trellis net (Item 3) onto the 45” x 5-1/2”
side rail (Item 2).
Stretch and secure trellis net across the side rail
and lock net into notched ends on each end of the
side rail.
Trellis net locked
in notched end of
side rail.
3
Stretch and secure the trellis net with staples to
the garden bed side rail or secure the trellis net to
the ground with ground stakes.
3
Use ground stakes or staples
(supplied in kit) to secure the
trellis net.
Securing Trellis Net
5
3
Side Rail Placement
4
2
Install the 45” x 5-1/2” side rail (Item 2) (with Logo
facing the front of the planter box) into the slots on
the trellis posts and slide down.
NOTE: Make sure the net stays seated in the
notches on the ends of the side rail when installing
side rail and trellis net onto the trellis posts.
Logo
Ground Stakes
Staple Staple