Grundig HD 9880 User manual

User Manual
HD 9880
01M-8813681600-5220-02
EN - TR
Ionic Hair Dryer

2
ENGLISH 04-13
TÜRKÇE 14-27

3
A
B
C
D
F
E
GH
I
J
K L

ENGLISH4
SAFETY _______________________
Please read this instruction manual thoroughly
prior to using this appliance! Follow all safety
instructions in order to avoid damage due to im-
proper use!
This appliance is intended for domestic use only.
7 Keep the instruction manual for future use.
Should a third party be given the appliance,
please ensure the instruction manual is inclu-
ded.
7 Never use the appliance in the bath, shower or
over a wash basin filled with water; nor should
it be operated with wet hands.
7 Do not immerse the appliance in water or let
it come into contact with water, even during
cleaning.
7 Warning ! Do not use the appliance near
water in bath- tubs, wash basins or other ves-
sels.

ENGLISH 5
7 Before cleaning or user maintenance operation
first plug out.
7 If the appliance is used in the bathroom, it is
essential that the power plug is pulled out after
use, as water close to the appliance can still
constitute a danger, even if the appliance is
switched off.
7 For additional protection, It is recommended
you to install a residual current device (RCD)
having a rated residual operating current not
exceeding 30 mA in the electrical circuit sup-
plying the bathroom. Ask your installer for ad-
vice.
7 Never place the appliance on soft cushions or
blankets during operation.
7 Ensure that the air induction and output open-
ings are not covered during operation.
7 The appliance is equipped with an overheating
protection system.
7 Unplug the appliance after use. Do not discon-
nect the plug by pulling on the cord.
SAFETY _______________________

ENGLISH
6
SAFETY _______________________
7 Never use the appliance if it or the power cord
is visibly damaged.
7 Never wind the power cord around the appli-
ance, as this can result in damage. Check the
power cord and the appliance regularly for vis-
ible damage.
7 Our GRUNDIG Household Appliances meet
applicable safety standards, thus if the appli-
ance or power cord is damaged, it must be re-
paired or replaced by a service centre to avoid
any dangers. Faulty or unqualified repair work
may cause danger and risks to the user.
7 Always keep the appliance out of the reach of
children.
7 This appliance can be used by children aged
from 8 years and above and persons with re-
duced physical, sensory or mental capabili-
ties or lack of experience and knowledge if
they have been given supervision or instruc-
tion concerning use of the appliance in a safe
way and understand the hazards involved.
Children shall not play with the appliance.

ENGLISH 7
SAFETY _______________________
Cleaning and user maintenance shall not be
made by children without supervision.
7 Do not dismantle the appliance under any cir-
cumstances. No warranty claims are accepted
for damage caused by incorrect handling.
7 A warm flow of air is required to achieve a per-
fect result. Please note that a metallised brush
can become extremely hot during prolonged or
intensive use. To avoid injury, adjust the usage
time of the appliance to the accessory being
used.

ENGLISH8
Dear customer,
congratulations on the purchase of
your GRUNDIG Heat Control Hair
Dryer HD 9880.
Read the following user notes care-
fully to ensure full enjoyment of your
quality Grundig product for many
years to come.
A responsible approach!
GRUNDIG focuses on
contractually agreed
social working condi-
tions with fair wages
for both internal em-
ployees and suppliers.
We also attach great importance to
the efficient use of raw materials with
continuous waste reduction of sev-
eral tonnes of plastic every year. Fur-
thermore, all our accessories are
available for at least 5 years.
For a future worth living.
Grundig.
Meanings of the
symbols
Following symbols are used in vari-
ous sections of this manual:
CImportant information
and useful hints about
usage.
A
WARNING: War-
nings against dange-
rous situations concer-
ning the security of life
and property.
Electrical insulation
class.
OVERVIEW ___________________
It does not contain PCB.

ENGLISH 9
OVERVIEW ___________________
Controls and parts
See the figure on page 3.
A Narrow styling nozzle
B Heat Control Sensor
C LCD display
D Removable air intake grille
E On / off button
F 1.8 meters of cable with hang-
ing loop
G On / off button for Ionic function
H Smart TP mode
I Button for the temperature levels
J Cold level
K Button for the air flow levels
L Display - Control panel
Settings
Your appliance has the following
settings:
Heat Control Sensor B
Measures the temperature directly
on the hair and allows the constant
maintenance of an optimal hair dry-
ing temperature.
Ionic function G
For non-static, soft, shiny hair.
Maintains vitality and momentum of
the hair and naturally hydrates the
hair structure.
The ionic function button G switches
the ion supply on and off
Temperature setting I
Button for raising or lowering the
temperature
Cold level J
– : Interrupts the hot air supply
with a cold air flow.
Air flow setting K
Button for raising or lowering the air
flow speed
Display - Control panel L
Integrated display with control pan-
el for controlling the Heat Control
Sensor and manual temperature /
air flow adjustment in the handle.

ENGLISH10
OPERATION __________________
Operation
1 Thoroughly dry hair with a towel
after washing.
2 If necessary, attach the small sty-
ling nozzle A.
3 Connect the mains cable F to the
socket.
Instructions
7 Check that the voltage on the ra-
ting plate on the device handle
matches the voltage of the local
power supply.
4 Switch on the device with the on /
off button. E
5 Set the temperature with the but-
ton I.
- Temperature level 1 appears on
the display and this lights up red.
- With each actuation, increase
the temperature level (5 levels).
- After level 5, level 1 appears
again.
6 Adjusting the air flow speed with
the button K .
- Speed level 1 appears on the
display and this lights up red.
- With each actuation, increase
the rotational speed (5 levels).
- After level 5, level 1 appears
again.
7 When drying, the hot air flow can
be interrupted by pressing and
holding the button for the cold
level J.
- The cold level symbol appears
on the display and this lights up
blue.
- The air flow setting can be chan-
ged during the cold air function.