9ENGLISH
OPERATION __________________________
Straightening hair
Caution
7 The housing of the appliance
becomes very hot. Do not touch
the housing near the heating
element.
7 Place the appliance on a solid,
flat, heat resistant surface.
Do not place the appliance on
any soft or uneven surfaces such
as carpets, rugs or bedding and
never cover.
7 Make sure your hair is com-
pletely dry.
1 Plug the power cord G into the
wall socket.
2 Switch the appliance on by push-
ing the On/Off switch F.
– The LED display D lights up in
white.
3 Set the temperature by operating
the "+" and "-" buttons E
– The LED display illuminates the
temperature when it is ready.
Notes
7 Adjust to the lowest temperature
the first time you use it.
7 Adjust the temperature (5 set-
tings) suitable for your type of
hair.
4 Comb or brush out a section
of your hair about 3 cm wide,
starting at the neck.
5 Guide the brush in a careful,
smooth movement away from the
head to the end of the section of
hair. Avoid making kinks in it
Caution
7 Do not touch the bristles as they
are very hot.
6 Hold the appliance in position
until the hair is heated.
– This takes a few seconds at the
most.
Notes
7 Repeat the procedure section by
section.
7 If you have thick hair, you might
have to repeat this procedure on
the same section several times.
7 Keep the strand of hair taut so
that no kinks form.
7 After use, switch the appliance
off by pushing the On/Off switch
F. The LED display D turns off.
Then unplug the power cord G.
Notes
7 Switches off automatically after
60 minutes
