Grundig MISURO GLCD3206HDV Series User manual

MISURO HD LCD TV
WITH DVD PLAYER
GLCD3206HDV Series
The Gold Technical Support Line: 1902 215 259
Personal Product Support
(Charges will apply at $2.95 per minute)

1
Introduction
Thank you for buying this Grundig product, which is designed to give you
many years of trouble-free service.
You may already be familiar with using a similar unit, but please take time to
read these instructions. They are designed to familiarize you with the unit’s
many features and to ensure you get the very best from your purchase.
Safety is important
Your safety and the safety of others is important.
Therefore, please ensure you read the “Safety Instructions” before you
operate this unit.
Warranty
In the unlikely event that your product fails to work normally, please call the
below free phone number to discuss the problem with one of our qualified
service engineers.
Australia.
Grundig Warranty: 1800 509 394
New Zealand
Grundig Warranty: 0800 450 259

2
Contents
Introduction …………………………………..….………1
Safety Instructions ……………………………………...3
Unpacking ………………………………………..…..…5
TV/Monitor Stand Installation Guidelines ……..……6
Wall Mount Bracket Installation Guidelines ……..……7
View of TV/Monitor ………..………………………….…8
Remote Control …………………..………………….…… 10
Installation and Connection …………….…………..…….13
TV/Monitor Screen Operation …….……………………14
TV Channel Menu and Adjustment …….……….….….16
DVD Player Operation ….……………..…………………26
Other Operation ….……………………………………..36
Notes …………….……………………………………….38
Maintenance …….………………………………………39
Specifications ….………………………………………..40
Display Modes .………………………………………….41
Warranty ..………………………………….……………..42

3
Safety instructions
1. Do not use this apparatus near water.
2. Clean only with a dry cloth.
3. Do not block any ventilation openings. Install in accordance with the
manufacturers instructions.
4. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
5. Protect the power cord from being walked on or pinched particularly at
plugs convenience receptacles, and the point where they exit from the
apparatus.
6. Only use attachments/accessories specified by the manufacturer.
7. Unplug this apparatus during lightning storms or when unused for long
periods of time.
8. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects
have fallen into apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
9. The apparatus should not be exposed to dripping or splashing and no
objects filled with liquids, such as vases, should be placed on the
apparatus.
10. If the television is to be built into a compartmentor similar enclosedspace,
the minimum distances must be maintained. Heat build-up can reduce
the service life of your television, and can also be dangerous.

4
Installation notes
This TV can be connected to AC 110-240 Volts. 50/60 Hz. Never connect
to a DC supply or any other power supply.
Locate the TV in the room where light does not strike the screen.
Total darkness or a reflection on the picture screen can cause eyestrain.
Soft and indirect lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Avoid excessively warm locations to prevent possible damage to the
cabinet or premature component failure.
Do not cover the ventilation openings when using the TV.
Additional Safety notes
Never tamper with any components inside the TV, or any other
adjustment controls not mentioned in this manual.
All LCD TVs are high voltage instruments. When you clean up dust or
water drops on the LCD PANEL or CABINET, the power cord should be
pulled out from the receptacle, then wipe the TV with a dry soft cloth.
During thunder and lighting, unplug the power cord and antenna cord to
prevent damage to your TV.
All repairs to this TV should only be performed by qualified TV service
personnel.

5
Unpacking
___________________________________________
Please make sure that the following items are included with your LCD
TV/Monitor. If any item is missing, please contact the warranty line.
TFT LCD TV/ Monitor
Remote control
Operation manual
RCA cable
Power cord
Stand Support Stand
Screws (a Type 4 x14 mm)
Screws (b Type 4 x16mm )
TV/Monitor Stand Installation Guidelines
____________________________________________

6
1. Fixing the Support to the Stand by screws (3 pieces a type screws 4 x14
mm) as below figure:
2. Fixing the finished Stand Assy. to the TFT LCD TV Unit by screws (4
pieces b type screws 4 x16mm) as below figure:
Wall Mount Bracket Installation Guidelines
____________________________________________

7
1. Fixing the Support to the TFT LCD TV Unit by screws (4 pieces b type
screws 4 x16mm) as below figure:
2. Using 6 screws to fix the TFT LCD TV Unit on the Wall Mount Bracket.
Please find there are 6 holes on the back of the unit.

8
I. View of the TV/Monitor
Front view
Back view

9
1. Remote sensor
To receive remote signal from
remote control.
2. STANDBY button / power
indicator
Turn the TV on and into standby mode,
in power on mode the indicator will
turn to blue and in standby mode
the indicator will turn to red.
3. PLAY/PAUSE button
To play/pause playback of disc.
4. STOP button
To stop playback of disc.
5. EJECT/CLOSE button
To eject a disc from the disc slot or
load a disc to the player
6. VOL- button
To decrease the volume level.
7. VOL+ button
To increase the volume level.
8. CH- button
To select channels downward in
TV mode.
9. CH+ button
To select channels upward in TV
mode.
10. MENU button
To enter menu mode.
11. SOURCE button
To select input source.
12. DVD disc slot
To load disc for playback.
13. HDMI 2
14. HDMI 1
15. PC audio in
16. VGA input jack
To connect to a PC.
17. Pr input
18. Y input
19. AV2 video input
20. AV2 audio input (Right)
21. AV2 audio input (Left)
22. AV1 video input
23. AV1 audio input (Right)
24. AV1 audio input (Left)
25. S-Video
26. Pb input
27. YPbPr audio input (Right)
28. YPbPr audio input (Left)
29. AV OUT video output
30. AV OUT audio output (Right)
31. AV OUT audio output (Left)
32. COAXIAL OUT
To connect the input socket on your
surround sound system, this jack
only output the SPDIF/PCM
33. ANTENNA jack
To connect the external aerial.
34. AC INPUT (AC110~240V 50/60Hz)