GSR Laser Tools GT1000C User manual

GPS
/GLONASS
Trip Meter
GT1000C
1
www.hmbe.com.au
Introduction ............................................................................................................................................................................... 2
Features .......................................................................................................................................................................................... 2
Optional Accessories ...................................................................................................................................................................... 3
Package Contents ....................................................................................................................................................................... 4
Installation ................................................................................................................................................................................. 5
Navigating the Menu .................................................................................................................................................................. 5
Main Display ............................................................................................................................................................................. 6
Main Menu ................................................................................................................................................................................. 6
Preload Trips ................................................................................................................................................................................... 7
Setup Menu .................................................................................................................................................................................... 8
Freeze Setup Menu .................................................................................................................................................................... 9
Contrast Setup Menu .............................................................................................................................................................. 10
Speed Limit Setup Menu ........................................................................................................................................................... 9
Backlight Setup Menu ............................................................................................................................................................. 10
Calibrate Tripmeter .................................................................................................................................................................. 10
Technical Specifications ............................................................................................................................................................
Table Of Contents
www.gsrlasertools.com.au

GPS
/GLONASS
Trip Meter
GT1000C
2
Congratulations on your purchase of a GT 1000C GPS/GLONASS Trip Meter. All pro ucts are
manufacture to the highest stan ar s of quality an will provi e many years of reliable
service.
Intro uction
Features
tility
• 2 trip counters.
• Individual count up/down, freeze, reset.
• External reset switch.
• No connection to vehicle required.
Functionality
• Statistics display.
• Current position.
• Preloadable trips.
www.gsrlasertools.com.au

GPS
/GLONASS
Trip Meter
GT1000C
3
`
Optional Accessories
GPS/GLONASS Antenna - Bulkhea Mount
GPS Antenna - Stubby
Ram Mount, Various
www.gsrlasertools.com.au

GPS
/GLONASS
Trip Meter
GT1000C
4
Package Contents
1 x GT 1000C GPS/GLONASS Trip
Meter
1 x GPS/GLONASS Antenna -
Magnetic/SMA
1 x wiring loom – han hel reset switch,
car power a apter, integrate fuse
1 x RAM 1“ iameter ball mount
1 x RAM suction cup base
www.gsrlasertools.com.au

GPS
/GLONASS
Trip Meter
GT1000C
5
1) Ensure that power to the vehicle is isolate .
2) Mount the GT 1000C Trip Meter on your preferre surface (e.g. ashboar ) using the
supplie ball or suction mount.
3) Insert the power connector into the vehicle’s accessory power socket (12V DC or 24V DC).
4) Plug the 6-way connector on the wiring loom into the Trip Meter.
5) Screw the GPS/GLONASS antenna connector onto the female connector locate on the
back panel of the Trip Meter. Do not close the antenna cable in the oor of the vehicle;
in most applications, leaving the antenna on the ashboar of the car will surfice.
6) Restore power to the vehicle an apply power to the Trip Meter
The Trip Meter shoul , un er normal circumstances, operate with at least 7
satellites. Shoul performance egra e inspect the GPS/GLONASS antenna for
wear or amage. The antenna may require replacement after several years
epen ing upon vehicular an environmental con itions.
Installation
Navigating the Menu
From the Main Display, the Menu key will enter the main menu;
from the main menu, Menu is use to step back one level, the
arrow keys navigate through a menu an to select the
highlighte item.
www.gsrlasertools.com.au

GPS
/GLONASS
Trip Meter
GT1000C
6
The o ometric functions of the Trip Meter utilise GPS an GLONASS technology
an , given goo satellite coverage, achieve greater than 99% accuracy. The
number of satellites currently tracke by the evice is shown in the lower-right
corner of the isplay; while four is the minimum number require to obtain
spee rea ings, seven to ten is typical.
Reset Trip B
Resets trip
B to zero.
Current Position
Displays the vehicle
’
s
current lat
itu e
an longitu e. Press Menu to return to
the menu. Change the isplaye units
using the Setup Menu.
Trip A Dir
Sets the irection of
trip
A.
Press
Enter to cycle between Up, Down or
Select. Select enables the use of the
arrow keys to change irection
from the main isplay.
Trip B Dir
As above, but for trip B.
Average Base On:
Set the
trip
on which to base average
spee . Press Enter to toggle between
trip A an trip B.
Show Statistics
Display etaile trip information.
Press
Menu to return to the menu.
Preloa Trips
Allows the user to preloa either trip A
or trip B.
Main Display
The main display shows the two trip counters, satellite count, current
and average speed. The arrow keys select the direction of trip A or B if
set to do so in the configuration menu (see below).
Main Menu

GPS
/GLONASS
Trip Meter
GT1000C
7
Setup
Displays the
general setup menu where
the user can change units, switch
function etc.
Preloa Trip A
Preloa
Trip A.
Use the
arrow keys
to
choose
a number an the enter key to a vance to
the next igit.
Preloa Trip B
Preloa Trip B.
Press
the
arrow keys
to
choose a number an the enter key to
a vance to the next igit. Press enter to exit
an save.
Reset A…
Sets the action to take
on trip B when Trip A is
reset. In “preload” mo e, trip B will be
preloa e with the value set using the Preloa
Trip B function above. In “leave” mo e, Trip B
will remain at its current value. Press Enter
to toggle between mo es.
Preload Trips
www.gsrlasertools.com.au

GPS
/GLONASS
Trip Meter
GT1000C
8
Unit
Set the isplay units to
kilometres
,
miles, nautical miles or metres per
minute. Press Enter to cycle.
Ext Switch
Press
Enter
to
toggle between
enabling an isabling the external
reset switch.
Freeze Options Menu
Displays the
Freeze Setup Menu
which allows the user to
optionally pause trips when the
reset button is presse .
Set Spee Warning
Displays the
Speed Warning
Setup Menu which allows the
user to set a maximum spee
above which the buzzer will
soun .
Set Display Contrast
Displays the
Contrast Setup Menu.
Set Display Brightness
Displays the
acklight
Setup Menu.
Calibrate Tripmeter
Displays the
Calibration Menu
which allows the user to scale
istance to match it to another
instrument if require .
Decimal Places
-
A
Press
Enter
to cycle fr
om 0 to 3
ecimal places shown.
Decimal Places
-
B
Press
Enter
to cycle from 0 to 3
ecimal places shown.
LAT/LON in…
Press
Enter
to
toggle
between DEG
( egrees) an DMS ( egrees, minutes,
secon s).
Up/Down:…
Selects the function of the
arrow
keys on the main isplay. Press
Enter to toggle between Direction
an Distance.
TripB: Small/Enlarge
Press
Enter
to toggle between a
small or enlarge trip B.
Setup Menu
Set to Defaults
Restore all settings to efaults.

GPS
/GLONASS
Trip Meter
GT1000C
9
Freeze…
The freeze function allows one to freeze the
current trip value on the screen when the reset
button is presse . Press Enter to cycle between:
Disabled – no freeze function
A Enabled – freeze enable on trip A only
Enabled – freeze enable on trip A only
A Enabled – freeze enable on trip A an trip B
Count/Halt During Freeze
Press
Enter
to
toggle between
continue counting uring freeze
an stopping the count uring
freeze. If counting is stoppe uring
freeze, any istance travelle
between enabling an isabling
freeze will not be measure .
Au
to Unfreeze
Press
Enter
to enable or isable
automatic un-freezing after 3
secon s.
Limit
Use
the
arrow keys
to set.
Press Enter To Save
The setting will be retaine when
the unit is powere off.
Press Menu To Exit
The previous setting is retaine .
Freeze Setup Menu
Spee Limit Setup
Menu
Factory Config
For administrative use only.
Rev
Displays the software revision number.
www.gsrlasertools.com.au

GPS
/GLONASS
Trip Meter
GT1000C
10
Contrast
Use
the
arrow keys
to set
the
isplay contrast.
Press Enter To
Save
The setting will be retaine when
the unit is powere off.
Press Menu To Exit
The previous setting is retaine .
Brightness
Use
the
arrow keys
to set isplay
brightness
Press Enter To Save
The setting
will be retaine when
the unit is powere off.
Press Menu To Exit
The previous setting is retaine .
A just Tripmeter by:
Use
the
arrow keys
to set the
percentage by which the isplaye
trip will be a juste . The unit oes
not require calibration to measure
an isplay istance accurately. This
function can however be use to
a just the isplay to another
instrument.
Press Enter To Save
The setting will be retaine when
the unit is powere off.
Press Menu To
Exit
The previous setting is retaine .
Contrast Setup Menu
Backlight Setup Menu
Calibrate Tripmeter
www.gsrlasertools.com.au