Guardian BEAM V2 User manual

Smart Control Kit Installation Guide
adhguardianusa.com
1-424-272-6998
TM
Model V2
Installation requires no special tools—you’ll just need a
screwdriver, stepladder and smartphone!

Controller Power
adapter
Wireless door
sensor
Opener
cable
Thank you for purchasing the beam Smart Control Kit!
Please read and follow all installation instructions. Homeowners
should retain this guide for reference.
TIP: If you are a professional installer, setup within the beam Home
app should be done using the homeowner’s smartphone.
Date Installed: ______________________

Download the app & begin setup
• While inside your home, download the “beam Home”
from the App Store (iOS) or Google Play (Android).
• Open the app, and select “Setup Your beam.”
• Follow prompts within the app to enter your WiFi network name
and network password.
TIP: Make sure you do not select a 5G network for setup (beam
only connects to 2.4GHz networks).
1

Controller Bottom
Power up the controller
• Locate the controller and power adapter . Plug the adapter
into the DC IN port on the controller and a nearby power source.
• The controller’s WiFi status light will blink orange to indicate it’s
ready for setup.
2
WiFi Status
Controller Top
Power Indicator
Setup Port

3 Program the controller
• Follow prompts within the app, and when directed, press your
phone screen tightly against the bottom setup port.
TIP: It may be helpful to dim the lights or cup your hand over your
phone during programming to minimize light interference.
• If successful, the controller will beep and the WiFi status light
will flash green. You’ll then be prompted to create an account.
(If not successful, the WiFi status light will blink red and you will be
guided through setup again.)
Point screen at
sensor now!
5

Scan the wireless door sensor code
• Locate the wireless door sensor and follow prompts within the
app to scan the code (found on the back of the sensor).
• Enter a name to identify your door.
• Unplug the controller and head out to the garage!
4

Mount the wireless door sensor
• Clean and wipe dry an area at the top of your garage door’s
interior panel.
• Remove the battery tab from the back of the wireless door
sensor and mount to the cleaned area of the garage door
using the adhesive Velcro strip.
5
Mounting location
(top of interior panel)

Mount the controller
• Locate the controller and power adapter , and grab your
stepladder.
• Clean and wipe dry your selected mounting location, either on
the garage door opener or a nearby surface. Mount using the
adhesive strip on the back of the controller.
TIP: The controller should be mounted within 6 feet of the garage
door opener and a power source.
6
Mounting location
options

Connect the opener cable to the controller
• Locate the opener cable .
• Plug the black connector into the opener port on the top of
the controller.
7
WiFi Status
Power Indicator
DC IN Port
Opener Port

• Unplug your garage door opener.
• Using your screwdriver, connect the other end of the opener
cable to your garage door opener push button terminals.
8
TIP: View sample connection diagrams for other
garage door opener makes and models at:
adhguardianusa.com/beam
Connect the controller to the garage
door opener
PUSH BUTTON
Sample diagram
of Guardian
terminals

Power up the controller & opener
• Plug the power adapter into the DC IN port on the controller
and a nearby power source.
• Plug your garage door opener back in. All done!
9

Get the most from your beam Smart Control Kit!
• Share access with others – Invite friends and family within the
app. No need to share your code or buy additional remotes.
• Explore integrations – beam plays well with others, from IFTTT to
Amazon Alexa.
• Register your Smart Control Kit – Register online at:
adhguardianusa.com/warranty-information
©2018, ADH Guardian USA LLC. Amazon, Alexa and all related logos are
trademarks of Amazon.com, Inc. or its affiliates.
Guardian Access & Door Hardware I 122 Penn Street I El Segundo, CA 90245
Warning:
To reduce the risk of injury to persons:
• Use this Smart Control Kit only with Residential Sectional Garage doors.
• Do not enable this device on a one-piece or swinging garage door.
• Do not use this device on garage door openers made before 1993 without
a working photo-eye safety system.