GUIYUAN INDUSTRY DEVELOPMENT 0020760 User manual

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [email protected]m
RF Wireless Remote Control Kit (Model 0020760)
Package Include:
1×Receiver
1×Transmitter
1×User manual
Features:
Application: It can be used in rolling blinds, rolling doors, projection screens, awnings, pumps, winches, conveyors or other appliances and
equipments with AC motors, it can remote controlAC motor rotates in the positive or reverse direction.
Wireless control, easy to install.
You can rotate a motor in the positive or reversal direction with the transmitter (remote control) from any place within a reliable distance.
The RF wireless signal can pass through walls, floors and doors.
You can turn on/ off the receiver with transmitter (remote control) from any place within a reliable distance.
Wireless RF signal can pass through walls, floors, doors or windows.
With reverse power protection and over current protection.
Reliable control: The receiver only works with the transmitter which use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use two or more units in the same place.
Receiver Parameters:
Model No: 0020760
Control Mode: Latched, Momentary / Positive Reverse Rotation
Power Supply (Operating Voltage): AC100~240V (110V/120V/220V/240V)
Output: AC100~240V (110V/120V/220V/240V)
Wire range for the terminals: 22-12 AWG
Working Frequency: 433MHz
Channel: 1 CH, can work with a AC motor
Static Current: ≤6mA
Maximum Working Current: 300W
Case Size: 86mm x 86mm x 30mm
Notice: The receiver automatically stops output after 2 minutes of continuous working.
Transmitter parameters：
Operating Voltage: 3V (1 x CR2430)
Transmitter with Wall Mount
Channel: 3 CH
Button Symbol: ▲,■,▼
Static Current: 3μA
Working Current: 10mA
Working Frequency: 433MHz
Size: 125mm x 43mm x 10mm
Working Range:
The maximum working distance can reach 50M in an open ground.
The maximum working distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it will
be hindered by trees, walls or other constructions, and will be interfered by other wireless signals. Therefore, the actual distance may not reach this
maximum working distance.
Usage:
Wiring (Control AC ordinary / tubular motor):
1) Connect the live wire of AC power supply to terminal “L” of INPUT, connect the neutral wire of AC power supply to terminal “N” of INPUT, and
connect the earth wire to terminal “E”.
2) Connect terminal “COM”to the common line of the AC motor, connect terminals “UP”and “DOWN”to the wires for positive/reversal rotation of AC
motor(You can exchange motor's two wires to change the rotating direction of motor).
Setting different control modes (Two control modes):
We have set the receiver in latched mode before delivery, if you want to change between latched mode and momentary mode, do as following
operation.
Method 1: Press the buttons ▲& ■on the receiver for 5 seconds, signal LED of receiver flashes quickly 3 times, it means change the control mode
is successful.
Method 2: Press the button ■on the receiver for 5 seconds, signal LED of receiver is flashes slowly, then press the button ■of the transmitter
within 10 seconds, signal LED of transmitter flashes 3 times, it means change the control mode is successful.
Operation:
1. If the receiver's control mode is latched mode.
1) Button of receiver:
Press button ▲of receiver: Motor rotates in positive direction.
Press button ■of receiver: Motor stops.
Press button ▼of receiver: Motor rotates in reversal direction.

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [email protected]m
Press button ■of receiver: Motor stops.
2) Button of transmitter:
Press button ▲of transmitter: Motor rotates in positive direction.
Press button ■of transmitter: Motor stops.
Press button ▼of transmitter: Motor rotates in reversal direction.
Press button ■of transmitter: Motor stops.
2. If the receiver's control mode is momentary mode.
1) Button of receiver:
Press and hold button ▲of receiver: Motor rotates in positive direction.
Release button ▲of receiver: Motor stops.
Press and hold button ▼of receiver: Motor rotates in reversal direction.
Release button ▼of receiver: Motor stops.
2) Button of transmitter:
Press and hold button ▲of transmitter: Motor rotates in positive direction.
Release button ▲of transmitter: Motor stops.
Press and hold button ▼of transmitter: Motor rotates in reversal direction.
Release button ▼of transmitter: Motor stops.
Change motor rotation direction:
Press the buttons ▲&▼on the receiver for 5 seconds, signal LED of receiver flashes quickly 3 times. It means the setting is successful.
How to pair the transmitter to the receiver:
1) Press the button ■of receiver for 5 seconds, signal LED on the receiver is flashes slowly. The receiver enters into status of LEARNING.
2) Press button ▲on transmitter within 10 seconds. If signal LED flashes quickly 3 times and turns off, it means learning is successful.
3) The receiver can learn 20 remote controls with different codes.
Delete all transmitters:
We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote
controls, which are stored in the receiver.
Operation: Press buttons ■&▼of receiver for 5 seconds, the receiver's signal LED flashes 3 times, That means all stored codes have been deleted
successfully.

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [email protected]m
Power Supply
L
N
OUTPUT
DOWN
COM
UP
E
Live wire
Neutral wire
M
AC Power Supply
AC motor
Earth wire
Control AC ordinary / tubular motor
INPUT