GUIYUAN INDUSTRY DEVELOPMENT S1DA-DC09-ANT2 User manual

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.com
E
-
Mail:sale@
carymart
.com
RFWireless Remote Control RadioController-Detector& Receiver
PackageInclude:
1xReceiver: S1DA-DC09-ANT2/S1DA-DC12-ANT2/S1DA-DC24-ANT2(1 Channel/ DelayControlMode)
1xWireless MovementDetector: W-01
1xUser manual
Feature:
Wireless control,easy toinstall
Adjustabledelay time: 0seconds ~99 hours
ControlLights,Motors,Fans, electricallyoperated Doors/ Locks/Windows/ Blinds/Cars orOtherAppliances.
You canturnon/offthereceiver withtransmitter (remotecontrol)fromanyplacewithinareliabledistance;thewirelesssignalcanpass through
walls, floors and doors.
Withcharacteristics of reversepower protection and over currentprotection
Audible/ visualindication
Usemicrocontroller modelof EM78P156, an 8-bitmicroprocessor designed and developed withlow-power and high-speed CMOS technology.
UseULN2003 todriverelay, withstrong anti-interference.
Reliablecontrol: The transmitter (Encoding) and the receiver (Decoding) usean8-bitcode.
One/severaltransmitterscan controlone/severalreceiverssimultaneously.
If you usetwoor more receiversinthe sameplace, you can setthemwithdifferentcodes.
Transmitting Frequency: 315MHz /433MHz
Working distanceofthe movement detectorand receiver withexternalextend antenna: 200M/ 600ft (theoretically)
Receiver:
ModelNo.: S1DA-DC09-ANT2/S1DA-DC12-ANT2/ S1DA-DC24-ANT2
Channel: 1CH
ControlMode: Delay(Press ->ON;ThenOFFafter thedelaytime)
Adjustabledelay time: 0seconds ~99 hours
Coding Type: Fixed code
Coding Setting:By soldering
Power Supply(Operating Voltage): DC12V 1V (S1DA-DC12-ANT2),DC9V 1V(S1DA-DC09-ANT2), DC24V 1V(S1DA-DC24-ANT2)
Output:Relayoutput(drycontact)
Working Voltage Range of Relay:AC110~240V or DC0~28V
PCBsize:93.5mm x73mm x27mm
Casesize: 100mm x77mm x30mm
MaximumWorkingCurrent: 10A
ExternalExtendAntenna:
FrequencyRange: 300~450MHz
Impedance: 50Ω
Antenna Length: 15cm
CableLength: 150cm
Weight:35g
Anti-interference,waterproof, shielded wire set inside
Magneticstand design for easytoinstall
Usage:
Initialstate:A,B =NormallyClosed; B, C=NormallyOpen.
When the movement detector istriggered:Turn onrelay(connect Band C, disconnectAand B).
Afterdelaytime:Turn off relayby itself (disconnectBand C,connectA and B).
Press buttonsof “”and “－”on the timer,adjust delay timefrom0second to99hours. “H”is Hour, “M”is Minute,and “S”isSecond.
For example,ifyou set “S01”,itmeansthe delay timeis 1second.
Wehavelearned the movementdetectortothe receiver.Ifyou don’twantthe receiver toworkwiththemovementdetector,you can deleteall
codesofthe movement detector,whichare stored inthereceiver.
Operation:Press andholdthe button of receiver untilsignalLEDflashesslowly; releasethe button,LEDkeeps slowflash.That meansallstored
codeshavebeen deleted successfully.
Learning the movement detector:
1) Pressthe button of receiver;signalLEDonthe receiver keepsshining.Thereceiver enters intostatus ofLEARNING.
2) Trigger the themovementdetector, if signalLEDon the receiver flashesquickly15timesand turns off, itmeanslearning issuccessful.
3) Whenreceiver is inthestatus of LEARNING, pressagainthe button of receiver, signalLEDturns off, learning process will be discontinued.
4) The receiver can learn severalmovement detectors withdifferentcodes.

SHENZHENGUIYUANINDUSTRYDEVELOPMENTCO.,LTD
Http://www.
carymart
.com
E
-
Mail:sale@
carymart
.com
Application Circuit
A, B=NormallyClosed;B, C=NormallyOpen.
Button
DC0~28V/AC110~240V
Lamp
A
B
C
Relay
Antenna
RFmodule
IC
LED
SignalLED
PowerLED
Powersupply
Timer
0
S
1
+
+
+
+
_
_
_
_