GUIYUAN INDUSTRY DEVELOPMENT S1FC-AC220 User manual

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [e-mail]
RF Wireless Remote Control Radio Controller / Transmitter & Receiver
Package Include:
1 x Receiver: S1FC-AC220 (Two Control Modes)
1 x Transmitter: CV-4
1 x User manual
Feature:
Wireless control, easy to install
Control motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals.
Universal input: support voltage of AC110V (100V~120V), widely used in US, Canada... and voltage of AC220V (200V~240V), used in UK,
France...
You can rotate the motor in the positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the
wireless signal can pass through walls, floors and doors.
With characteristics of over current protection, short-circuit protection and temperature protection.
Audible / visual indication
Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.
Use ULN2003 to drive relay, with strong anti-interference.
Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.
One/ several transmitters can control one/ several receivers simultaneously.
If you use two or more receivers in the same place, you can set them with different codes.
Transmitting Frequency: 315MHz / 433MHz
Receiver:
Model No.: S1FC-AC220
Control Mode: Momentary, Latching
Coding Type: Fixed code
Coding Setting: By learning
Power Supply (Operating Voltage): AC 100 ~ 240V
PCB Size: 94mm x 56mm x 24mm
Case Size: 100mm x 60.5mm x 30mm
Maximum Current: 10A
Transmitter:
Model No.: CV-4
Channel: 4 CH
Remote Control Distance: 500m / 1500ft (theoretically)
Encode: Fixed code by soldering
Unit size: 108mm x 50mm x 18mm
Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)
Usage:
Connect live wire to terminal “L”and neutral wire to terminal “N”. Then connect AC motor to terminals “UP”, “COMMOM” and “DOWN”. You can
exchange “UP” and “DOWN”wires of motor to change the rotating direction of motor.
Set Momentary control mode: Do not connect Jumper.
Press and hold button ▲on remote or receiver: Terminals UP and COMMOM directly output AC110V / AC220V; motor rotates continuously in
positive direction.
Release button ▲on remote or receiver: Stop the motor.
Press and hold button ▼on remote or receiver: Terminals DOWN and COMMOM directly output AC110V / AC220V; motor rotates continuously in
reversal direction.
Release button ▼on remote or receiver: Stop the motor.
Set Latching control mode: connect the Jumper.
Press button ▲on remote or receiver: Terminals UP and COMMOM directly output AC110V / AC220V; motor rotates continuously in positive
direction.
Press ■on remote or receiver: Stop the motor.
Press button ▼on remote or receiver: Terminals DOWN and COMMOM directly output AC110V / AC220V; motor rotates continuously in reversal
direction.
Press button ■on remote or receiver: Stop the motor.
We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote
controls, which are stored in the receiver.
Operation: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored
codes have been deleted successfully.

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://www.carymart.com E-Mail: [e-mail]
Learning the button of remote control:
1) Press the button of receiver; signal LED on the receiver keeps shining. The receiver enters into status of LEARNING.
2) Press any one button on remote control. If signal LED flashes quickly 15 times and turns off, it means learning is successful.
3) When receiver is in the status of LEARNING, press again the button of receiver, signal LED turns off, learning process will be discontinued.
4) The receiver can learn several remote controls with different codes.
Signal LED
Power Supply
Relay
Relay
L
N
Application Circuit
Up
Down
Stop
UP
M
COM
DOWN
Power LED
IC
Button
Jumper
Antenna
RF module
EARTH
Live wire
Zero wire