GW Instek GRA-439 User manual

Rack Adapter Panel
GRA-439
Assembly Manual
GW INSTEK PART NO. 82RA-43900MA1
This assembly manual contains proprietary information, which is protected by copyrights. All rights are
reserved. No part of this manual may be photocopied, reproduced or translated to another language
without prior written consent of Good Will company.
The information in this manual was correct at the time of printing. However, Good Will continues to
improve products and reserves the rights to change specification, equipment, and maintenance
procedures at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan.
ISO-9001 CERTIFIED MANUFACTURER

GRA-439 Assembly Manual
GRA-439
The GRA-439 rack mount is suited for the ASR-2000(R) AC/DC Power Supplies.
The GRA-439 supports both the EIA (GRA-439-E) and JIS (GRA-439-J) standards
for use with standard sized rack units.
Rack Mount Adapter Component List and Assembly
Description
Please check to make sure all the components of the
GRA-439 rack mount kit are provided. The JIS and EIA rack
mounts have slightly different component sets.
GRA-439-E
Assembly
Item
Part NO.
Description
QTY
1
59CA-04017NS1
SCREW ROTATION ,- ,M4*17*0.7P ,L=25
ISO N RoHS
3
2
62RA-410HP2A1
CA GRA-410 FRONT BRACKET ,RoHS
1
3
62RA-410HP701
CA GRA-410 BLANK PANEL (2) ,RoHS
1
4
62RA-410HP801
CA GRA-410 BLANK PANEL (3) ,RoHS
1

GRA-439 Assembly Manual
3
5
62RA-410HP1A1
CA GRA-410 MIDDLE BARCKET ,RoHS
1
6
592B-W3008NS1
SCREW PMS ,+ ,M3*8 ISO ,N (WASHER
P.S) ,RoHS
1
7
62RA-410HPAA1
CA GRA-410-E 3U BRACKET ,RoHS
2
8
593B-03008NS1
SCREW FMS ,3*8*0.5m/m ,ISO ,N ,RoHS
4
9
593B-03005NS1
SCREW FMS ,+ ,3*5 ,ISO ,N ,RoHS
4
10
62RA-439HP201
CA GRA-439 RIGHT BRACKET ,RoHS
1
11
599B-03006NS1
SCREW IMS ,+ ,3*6 ,ISO ,N ,RoHS
4
12
594B-W3008NS1
SCREW BMS ,+ ,3*8*0.5P ,ISO ,N
(WASHER P.S) ,RoHS
2
13
62RA-410HP9A1
CA GRA-410 RACK HP ,RoHS
2
14
62RA-410HP3B1
CA GRA-410 REAR BRACKET ,RoHS
1
15
62RA-439HP101
CA GRA-439 LEFT BRACKET ,RoHS
1
16
592B-W3006NS1
SCREW PMS ,+ ,3*6*0.5P ,ISO ,N
(WASHER P.S) ,RoHS
8
17
62RA-441HP301
CA GRA-441 HOLDER ,RoHS
2
GRA-439-J
Assembly
Item
Part NO.
Description
QTY
1
59CA-04017NS1
SCREW ROTATION ,- ,M4*17*0.7P ,L=25
ISO N RoHS
3
2
62RA-410HP2A1
CA GRA-410 FRONT BRACKET ,RoHS
1
3
62RA-410HP701
CA GRA-410 BLANK PANEL (2) ,RoHS
1
4
62RA-410HP801
CA GRA-410 BLANK PANEL (3) ,RoHS
1
5
62RA-410HP1A1
CA GRA-410 MIDDLE BARCKET ,RoHS
1
6
592B-W3008NS1
SCREW PMS ,+ ,M3*8 ISO ,N (WASHER
P.S) ,RoHS
1
7
62RA-410HPC01
CA GRA-410-J TOP BRACKET ,RoHS
1
8
62RA-410HPBA1
CA GRA-410-J 3U BRACKET ,RoHS
2
9
593B-03008NS1
SCREW FMS ,3*8*0.5m/m ,ISO ,N ,RoHS
8

Assembly
4
10
593B-03005NS1
SCREW FMS ,+ ,3*5 ,ISO ,N ,RoHS
4
11
62RA-439HP201
CA GRA-439 RIGHT BRACKET ,RoHS
1
12
599B-03006NS1
SCREW IMS ,+ ,3*6 ,ISO ,N ,RoHS
4
13
594B-W3008NS1
SCREW BMS ,+ ,3*8*0.5P ,ISO ,N
(WASHER P.S) ,RoHS
2
14
62RA-410HP9A1
CA GRA-410 RACK HP ,RoHS
2
15
62RA-410HP3B1
CA GRA-410 REAR BRACKET ,RoHS
1
16
62RA-439HP101
CA GRA-439 LEFT BRACKET ,RoHS
1
17
592B-W3006NS1
SCREW PMS ,+ ,3*6*0.5P ,ISO ,N
(WASHER P.S) ,RoHS
8
18
62RA-441HP301
CA GRA-441 HOLDER ,RoHS
2
Assembly
Initial setup
1. Remove the handle from the power supply units.
Remove the handle cover.
Remove the screws securing the handle to the case.
Remove the handle.
→
2. Remove the feet from the underside of the power supply units.
Instrument
insertion
1. Insert ASR-2000(R) into the GRA-439 rack mount
horizontally and ensure the catch links up with the groove.
¾÷¾¹
¤ö
Catch ASR-2000(R)

GRA-439 Assembly Manual
5
2. Attach the Front Bracket to the Middle Bracket with
fastening the rack screws.
¾÷¾¹
Front Bracket
Rack Screw
Front Bracket
Rack Screw ASR-2000(R)
3. Secure the Rack Holding Plates (Rack HP) to the groove
on the Rear Bracket and to the ASR-2000(R).
¾÷¾¹
Rear Bracket
Rack HP
ASR-2000(R) Rear Bracket
Rack HP
Rear panel
illustration
Ensure the Rack HP is fixed on the rear panel with rack
screws as shown below.
Rack HP (62RA-410HP9A1)
Blank panel
insertion
1. Insert the blank panel into the
groove of the Front and Middle
Brackets.

Specification
6
2. Secure the panel with the PMS-W-3*8 screws.
BLANK PANEL
Blank Panel
Specification
Load Capacity
Max 20kg
Rack Weight
GRA-439-E:1.0kg
GRA-439-J: 1.2kg
Rack installation
Diagram
Please note the
minimum width
that is needed to
be supported on
the L-brackets.