GW Instek GRA-428 User manual

Rack Adapter Panel
GRA-428
Assembly Manual
GW INSTEK PART NO. 82RA-42800M01
This assembly manual contains proprietary information, which is protected by copyrights. All rights are
reserved. No part of this manual may be photocopied, reproduced or translated to another language
without prior written consent of Good Will company.
The information in this manual was correct at the time of printing. However, Good Will continues to
improve products and reserves the rights to change specification, equipment, and maintenance
procedures at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan.
ISO-9001 CERTIFIED MANUFACTURER

Overview
2
GRA-428
Overview
The GRA-428 3U 19”rack mount is suited for the PSP-405, PSP-603 and PSP-2010
Programmable Switching DC Power Supply. The GRA-428 is designed for use
with standard sized rack units.
Rack Mount Adapter Component List and Assembly
Description
Please check to make sure all the components of the
GRA-428 rack mount kit are provided.
Please note that the rack mount kit comes partially
assembled.
GRA-428
Assembly
Item
Part NO.
Description
QTY
1
62RA-428FP101
FRONT PLATE
1
2
62PA-340HD101
HANDLE
2
3
592B-04010NS1
PMS-4*10
4
4
62RA-428LO101
BOTTOM CHASSIS
1
5
62RA-428HP101
BRACKET
2
6
594B-W3006NS1
BMS-W-3*6
8

GRA-428 Assembly Manual
3
Assembly
Description
Assembly of the GRA-428 simply involves securing the
PSP-405, PSP-603 or PSP-2010 units into the bottom chassis.
Steps
1. Remove both side screws of the PSP-405, PSP-603 or
PSP-2010 units.
2. Attach the two Brackets(5) to the PSP-405, PSP-603 or
PSP-2010 units, using the BMS-W-3*6(6) screws.
3. Place the PSP-405, PSP-603 or PSP-2010 units in the
Bottom Chassis(4) and attach both Brackets(5) to the
Bottom Chassis(4) using the BMS-W-3*6(6) screws.

Appearance
4
Appearance
GRA-428