GW Instek GRA-443 User manual

Rack Adapter Panel
GRA-443
Assembly Manual
GW INSTEK PART NO. 82RA-44300M01
This assembly manual contains proprietary information, which is protected by copyrights. All rights
are reserved. No part of this manual may be photocopied, reproduced or translated to another
language without prior written consent of Good Will company.
The information in this manual was correct at the time of printing. However, Good Will continues to
improve products and reserves the rights to change specification, equipment, and maintenance
procedures at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan.
ISO-9001 CERTIFIED MANUFACTURER

GRA-443 Assembly Manual
GRA-443
Rack Mount Adapter Component List and Assembly
Description
Please check to make sure all the components of the GRA-
443 rack mount kit are provided.
GRA-443
Assembly
Item
Part NO.
Description
QTY
1
62RA-411HD101
U-shaped handle
2
2
62RA-443FP101
443-RACK-FP
1
3
62RA-443LO101
443-RACK-LO
1
4
594B-06012ZS1
M6*12 SCREW
4
5
57RG-20B01901
Foam
4
6
62RA-443HP101
443-RACK-HP
2

GRA-443 Assembly Manual
Assembly
Setup diagram
Note
After pushing the device into the RACK tray, fix two
443-RACK-HP to 443-RACK-LO (there are screws on
RACK-HP can be fixed by hand as shown in the red
arrow in the picture above).
Front view
GRA-443