Gyroor R1 User manual

Learn more News about the Gyroor?
Scan on "Gyroorboard" Messenger QR code to get it soon.
USER MANUAL
Electric Skateboard
R1
@Gyroorboard @Gyroor @Gyroorboard
www.gyroorboard.com
@Gyroorboard
The manufacturer reserves the right to make changes to the product, and updates this manual at any time.
Visit www.gyroor.com to download the latest user manual.
ｗｗｗ．ｇｙｒｏｏｒｂｏａｒｄ．ｃｏｍ

Learn more News about the Gyroor?
Scan on "Gyroorboard" Messenger QR code to get it soon.
The manufacturer reserves the right to make changes to the product, and updates this manual at any time.
Visit www.gyroor.com to download the latest user manual.
ｗｗｗ．ｇｙｒｏｏｒｂｏａｒｄ．ｃｏｍ
Thanks for choosing our product.
Have fun with this electric skate b oard.
Contents
1.Configuration & Packing Listing
2.How to Operate
3.Basic Function Switching
4.Battery Indicator
8.Malfunction Warning Instruction
9.Product Specification
10.Warranty
11.Warranty Card
12.Contact
01
03
05
07
11
13
14
15
16
5.Charging Skateboard 08
6.Safety Tips for Charging
7.Safety Recommendations
09
10

PU Wheels
Battery & Shell
Panel
ESC & Shell
Motors
Power button
Truck
Charging port
2
1. Configuration & Packing Listing
Accessories
R1 Electric Skateboard package includes the following parts in the box.
Please check it after unboxing. And we recommend keeping the
original packaging for 30 days at least.
Any lack or loss, please do not feel hesitate to contact our email at help @ gyroor.com
E-Skateboard(1)
Remote Control(1)
Skateboard Charger(1)
Hex Wrench(1)
User Manual(1)
USB Cable(1)
T-Tool(M10/M8/M5)(1)
USER MANUAL
Electric Skateboard
R1
@Gyroorboard @Gyroor @Gyroorboard
www.gyroor.com
@Gyroorboard

2) Power off
Manual off
For remote control: Press "button A" for 3 seconds to power off (It can be power off only
when the speed is 0 Mph)，and the remote control vibrates shortly when power off.
For skateboard: Press the power button for 2 seconds to power off.
Note: If the skateboard is powered off, but the remote control is not powered off, and in
the state of connection, the screen of the remote control displays "disconnect", and the
remote control vibrates shortly to remind.
Note: In pairing mode, the remote control screen displays a “disconnect” hint, and the
indicator light of the skateboard flashes red.
1) Power on
For remote control: Press“button A” on the remote control for
3 seconds to power on. The remote control will vibrate shortly
and enter the pairing mode.
For skateboard: Click on the power button on the side of the
ESC & Shell once to enter the pairing mode.
DISCONNECT!
B
mph
T:
1O: 0.0ml
0.0ml
R
R B
T:
O:
1
4
3
2.How to Operate
Acceleration/Braking roller
Button B
Display screen
Button A
Speed
Remote control
Power
Gear Level
Skateboard Power
Direction
Trip Distance
Total Distance
If the remote control powers off in the state of connection, the skateboard will start to
brake slowly and power off after 5 minutes of standstill.
Automatical off
The remote control and skateboard will automatically power off if the skateboard is at
rest and both of them are not operated within 5 minutes.
Note: The remote control will vibrate shortly as a reminder at this moment.
3) Pairing(Have been paired when leaving the factory)
Note: The normal state after the connection is that the screen displays the main page,
and the indicator light of the skateboard is on constantly.
----
mph
ml
ml
Power them on separately according to the “Power on”
operation.
Pairing successfully:
Both of them enter the pairing mode, and the system will
pairing automatically without any operation.
----

(2)Press the "button A" on the remote control for 5 seconds until "REMOTE PAIRED Ok"
appears on the screen, and switch to the "UNIT SYSTEM" page quickly (the skateboard
indicator flashes red).
(3)The unit is switched by sliding the acceleration/braking roller up and down.
(4)Click the "A button" to confirm, and the screen will switch to the main page (the
skateboard indicator light is on constantly).
Acceleration/braking roller Acceleration/braking roller
B
mph
T:
O:
10.0ml
0.0ml
R
UNIT SYSTEM
KM/H KM MPH MILE
REMOTE PAIRED Ok！
R B
mph
T:
O:
1
ml
RB
mph
T:
1O:
R B
mph
T:
O:
1
ml
Push up the “Acceleration/Braking
roller” to control acceleration.
Pull it down to control the
brake.
Note: Ensure the acceleration/braking roller is in a neutral position before power on,
or else it will affect the user experience.
When powering on the remote control, if the acceleration/braking
roller does not return to a neutral position, the screen will remind
you to return it. Please check and follow the instructions.
1) Acceleration/Braking control
2) Switch speed unit
Make sure that the skateboard and remote control are powered off.
(1)Press the power button of the skateboard for 5 seconds until the indicator light flash
red quickly.
Note: The system will update to the last used speed unit automatically. So if you don’t
need to switch, you can pair them quickly by "clicking the power button of the skateboard
once" + "pressing the button A of the remote control for 3 seconds".
3) Switch direction of skateboard
In the state of forwarding, double
click “Button B”, the remote control
will short vibrate once, the direction
icon changes to“Backward arrow”.
In the state of backward, double
click “Button B”, the remote control
will short vibrate once, the direction
icon changes to “Forward arrow”.
Note: This operation is valid when the acceleration/brake roller is in the neutral position
and the speed is 0.
4) Switch gear
Short press“button B”, the remote control switches to the next gear
with a short vibration. The gear icon will change accordingly.
(First gear: 12Mph; Second gear: 18Mph; Third gear: 23Mph)
Note: This operation is valid when the acceleration/brake roller is in the neutral position.
3.Basic function switching
6
5
ml ml
ml
ml

1) The battery indicator of the remote control
There is five grid power.
After power is on, if the remote control battery is less than
10%(You can use it for 30 minutes at most), the remote
control screen indicates that the power is less than 10%
with a long double vibration.
When the battery is only 5%(You can use it for 15 minutes),
the remote control reminds the battery is less than 5%
again with a long double vibration.
Note: When the battery is lower than the safe voltage(3.4V) and connected with the
skateboard, if the skateboard stops, it vibrates once and powers off automatically.
2) The battery indicator of the skateboard
There is five grid power.
When the skateboard battery is lower than 25%, the remote
control screen indicates the battery is lower than 25%, with
a long double vibration.
When the skateboard battery is lower than 10%, the remote
control screen indicates the battery is lower than 10%, with
a long double vibration.
Note: When the voltage is lower than the safe voltage, the system will close the power
output automatically. Please brake immediately at this time.
1) Charging the skateboard
After power off, the skateboard enters into a charging state
automatically if it connects to the charger. The indicator light
on the charger is red, which means it is charging, and green
means it is fully charged.
R
REMOTE LOW VOL TAGE !
5%
R
10%
REMOTE LOW VOL TAGE !
B
REMOTE LOW VOL TAGE !
R
REMOTE LOW VOL TAGE !
10%
R B
mph
T:
1O: ml
Charger
Note: If the skateboard is connected to the remote control when charging, for safety
and to extend battery life, please do not use the skateboard/remote control and
disconnect it.
When charging the remote control, it vibrates short. The
remote control screen displays the charging progress in
real-time in the form of flowing water lightly.
Note: You cannot operate the remote control while charging it. It will automatically
power off after unplugging the charger and short vibrate once.
7 8
4.Battery indicator 5.Charging Skateboard
2) Charging remote control
ml

No wet occasions! No wet hands!
6. Safety Tips for Charging
1.Before first use, please charge it for 5 hours at least in the proper temperature and
environment.
2. To extend the battery life to the utmost, please charge it once two days after riding (If you
do not use it for a long time, please charge it once a month).
3.The battery will be damaged without timely charging. As time goes by, the battery capacity
will gradually go out, leading to battery over-discharge.
4. Please use the battery, charger and cable provided by the original manufacturer, avoiding
dangers caused by battery overcharge.
5. Please ensure the correct connection of charger and cable in a well-ventilated environment.
6.Please use it under dry conditions. The charger or cable must not come into contact with
water, for it may result in an electric shock. No touching charger or cable with wet hands.
8. Please make sure to unplug from the plug end, not from the cable.
9. Please do not make the charger or cable come in with sharp or hot articles.
10.Please make regular checks with the charger and its cable to avoid an emergency.
11.If there is obvious damage to the charger or cable, please do not use the charger anymore,
and contact us for exchange.
12.Please do not repair the battery, charger or cable personally.
13. If there is any question during charging, please feel totally free to contact us.
1) Please wear all protective gear and helmets when practicing to avoid any accidents.
In addition, when you use it daily, please take corresponding protective measures, which is very
important!
2) Electric Skateboard - it is only a device for entertainment, not a vehicle. But once you are riding
to the public area, the E-Skateboard brings certain risks for your safety. Therefore, please ensure
you have sufficient control ability and rich skateboarding experience before riding for your
safety and others.
3) Please check the relevant traffic rules of your country before riding, ensure that E-Skateboard
can be driven on public roads, and keep abreast of the latest road rules.
4) You should understand that you must comply with all safety recommendations if you ride the
E-Skateboard in a public place. In addition, you must know that even if you follow entirely, you
may be at risk caused by illegal driving/improper operation of others or vehicles. Just like when
you walk or ride a bicycle, you can also be injured by other vehicles.
5) As in other types of vehicles, the higher the speed of the E-Skateboard, the greater the braking
distance. So we strongly recommend that you don't speed up at will. On some smooth roads,
emergency braking may cause skidding of the E-Skateboard, loss of balance, and even fall.
Therefore, during riding of E-Skateboard, you need to be vigilant, adhere to an appropriate
speed, keep a safe distance from pedestrians or with other vehicles. Riding on unfamiliar
terrain, keep vigilance and proper speed.
6) While riding the E-Skateboard, respect the rights of pedestrians. Do not scare them, especially
children. Before you pass the pedestrians, Please keep the speed under 4 Mph and avoid them.
If you move in the same direction as pedestrians, keep to the left side as much as possible(right
side for right-hand traffic countries). If you are moving in the opposite direction, stick to the
right and slow down.
7) Please strictly follow your country road rules to driving and strictly abide by rules set out
in the instructions and safety recommendations. Violation of the above rules may result in
financial expenses, personal injury, the occurrence of traffic accidents, legal disputes, conflict,
and other unpleasant situations. Our company does not bear any direct or joint liability.
8) To avoid personal injury, do not loan E-Skateboard to others who do not know how to drive.
Before you transfer your E-Skateboard to friends, please let him(her) spend training and teach
he (her)must be wearing the proper safety gear.
9) Please do scrutinize the E-Skateboard before each use. If you find all kinds of abnormal
symptoms(such as damaged parts, decreasing battery life, PU wheels wear excessively,
uncharacteristic sounds when turning, etc). Please stop using the e-Scooter immediately.
Don't ride it reluctantly.
10
9
7. Safety Recommendations

1) Overcharge (when going downhill with a fully charged battery)
If some user violates the rule and goes downhill with a fully charged
battery, the remote will vibrate, and The screen prompts"BOARD
OVER VOLTAGE" when ESC detects the battery voltage is too high. If
the user continues to go downhill, the board will brake automatically
to prevent the user from doing that. This method can only protect the
battery to a limited extent and cannot 100% guarantee battery safety.
BOARD OVER VOLTAGE！
BOARD
In principle, going downhill with a fully charged battery is prohibited because the battery
will be charged when braking during the going-downhill process. Going downhill with a
fully charged can shorten the service life of the board battery or even cause accidents like
an explosion or a fire! So the user needs to consume some power
before going downhill!
2)Signal loss warning
DISCONNECT!
When the signal is lost suddenly, the remote control screen indicates
disconnection with a short vibration.
If the skateboard is accelerating, the acceleration will stop slowly first,
then brake slowly automatically. If the skateboard is not accelerating,
it will brake slowly.
If the signal is lost, the remote control will search the device of the skateboard. If it succeeds
in searching and reconnecting, the remote control will short vibrate, the brake will be
cancelled and return to regular operation.
3)Lock-up warning
BOARD
OVER TEMPERATURE!
MOTOR STALLING!
When the motor is lock-up or completely stuck, the remote control
will short vibrate continuously and intermittently. The remote control
screen indicates lock-up. If that happens, the user should stop running
the skateboard and check whether any foreign matter is stuck in it,
clear them and rerun it.
4)Overheating warning
When the motor's operating temperature is higher than 100°C or
lower than 0°C, the remote control vibrates once, and the screen
indicates an overheat, and the motor will stop working.
Note: The user should pay attention to the temperature of the motor.
Stop using if the operating temperature of the motor is high. Reuse it
after the temperature reduces.
5)Overheating warning
When the operating current of the motor exceeds the value allowed,
the remote control screen indicates overcurrent, and the motor stops
working.
Note: Close the skateboard and repower on. Please use it after the
current returns to normal.
BOARD OVER CURRENT!
11 12
8.Malfunction Warning Instruction

Motor, Controller, Remote control, Charger, T-Tool, Hex Wrench
10.Warranty
Warranty service is carried out following the Law on 《Consumer rights》 and the Law on《the quality
of products》. The warranty service includes:
Information on warranty maintenance Term
1 year
6 months
NOT covered by warranty
Battery
Panel/Truck/PU wheel/Shell
Recommendation:
Use the packaging for the safe transport of the device. We recommend keeping the original
packaging within 30 days after receipt of goods.
Caution:
The battery is guaranteed for 6 months, and the accessories are guaranteed for one year. If it
is not a quality problem, there is not covered by the warranty.
Non - warranty regulations
1.Authorized maintenance, misuse, collision, negligence, abuse, intake, accident. Improper
use of non-product accessories or tear up the modified label, anti-counterfeit mark.
2.The warranty period has expired;
3.Damage, caused by force majeure;
4.Failures, which do not correspond to the 《List of faults》of EcoRider service center;
5.A failure of the device or its components from the 《Fault list》, which arose in connection
with the human factor, and which interfere with regular operation.
6.Failures that have arisen in connection with the human factors (including, but not limited to
the excessive wetting device, puncture, drop, scratch, and damage an outer casing, which has
arisen as a result of the regular use of goods)
7. If this product is used for commercial purposes, all warranty conditions are not maintained.
14
13
9.Product Specification
Model
R1
Motor
Motor Power
Tire Size
Max Speed
Climbing Gradient
Max Loading
Battery voltage / capacity
Range Per Charge
Charge Time
Charger
Charger Voltage
Commumication Mode
Distance of remote control
Applicable ESC
Body Material
Net Weight
Waterproof Level
Length*Width*Height
Hub motors
550W*2
3.5in
22 Mph
30°
220lbs
36V 6.0Ah/216Wh/6000mAH
18-23 miles
3-5H
42V 2A
AC100-AC24050-60Hz
2.4Ghz
40m( Open area )
ESC-Skateboard-HW9005/HV9006
Maple ( panel )+ PU ( wheels )
17.5 lbs
IP54
36.1*11.3*5.1 inch
Parameters
Suitable area
Certificate
Drive Type Rear-drive
Solid road, surface, asphalt road surface to overcome, obstacles high less than 1 cm,
a depth of pools no more than 2 cm.
CE , ROHS , UL
Note: The measurement data comes from the laboratory environment and is for reference only.
The actual result will be different due to speed, load, climbing etc.

Learn more News about the Gyroor?
Scan on "Gyroorboard" Messenger QR code to get it soon.
@Gyroorboard @Gyroor @Gyroorboard @Gyroorboard
The manufacturer reserves the right to make changes to the product, and updates this manual at any time.
Visit www.gyroor.com to download the latest user manual.
www.gyroor.com
Any questions, please get in touch with us at
Email: [e-mail]
Name
Email
Address
Dealer Name
Dealer Address
Phone Call
SN Code
Purchase Date
Phone Call
Order Number
16
15
11.Warranty Card 12.Contact