Lycaon Board Lycaon GR User manual

Please read all the information
before you hit the road with your board.
User Manual

LYCAON BOARD
Read Before Riding.......................................................................................1
Warnings........................................................................................................2
Board Diagram...............................................................................................3
Remote Diagram............................................................................................4
Charging the Board and the Remote..............................................................5
Connecting (Pre-paired with Board)..............................................................5
Pre-Ride Checklist.........................................................................................6
Riding Stance.................................................................................................7
Riding the LycaonBoard................................................................................8
Remote Warning Instruction.........................................................................10
Remote Control Specification.......................................................................12
Technical Parameters of Lycaon GR............................................................12
Packing List...................................................................................................15
Proper Use of the Board................................................................................16
Limited Warranty..........................................................................................16
For all Return and Warranty Shipping..........................................................16
Contents

LYCAON BOARD
1
Always wear a helmet. Other safety gear such as gloves, pads, closed-toe shoes,
long sleeves, and long pants are strongly advised.
Be aware of other cars and vehicles, as they can kill. Always ride defensively
when in the presence of other vehicles. Be aware of local laws that govern proper
usage of your board on public roads, bike paths, sidewalks, or other places you
may ride.
Braking downhill on a full battery can cause a board shutdown. Internal circuitry
will allow for some braking on a downhill at full charge, but this braking is
limited. To avoid this be sure to ride on flats or uphill to drain the battery before
attempting a downhill after a full charge.
Your board can lose power and brakes at any moment due to radio interference, a
dead remote battery, downhill overcharging on a full battery, and other factors.
Only ride your board at speeds and on hills where you'd be comfortable without
power and brakes.
Acceleration in Pro mode is rapid and may be dangerous.
Hills and high speed can be very dangerous. Be sure to start slow and remain
extra careful in these conditions, even if you are an experienced rider.
Read Before Riding

LYCAON BOARD
2
Always wear a helmet when riding.
Never ride in the water, over wet surfaces, in the rain, on slippery or uneven
surfaces, steep hills, or in traffic. Avoid cracks, train tracks, gravel, rocks, or any
obstacles that could cause loss of traction. Avoid riding at night, areas with poor
visibility, and narrow spaces for any safety risk.
When you ride a LycaonBoard Electric Skateboard you risk death or serious
injury from loss of control, collisions, and falls. You must read and follow all
warnings and instructions in this manual.
Do not ride the LycaonBoard Electric Skateboard in environments, on inclines, or
at speeds where you would not be safely in control of an unpowered skateboard.
In the event of wireless interference or battery fault, you may need to rely on
skating techniques like foot braking or sliding to a stop. Riding in wet conditions
or through puddles may damage the board's electronics and cause the board to
lose power or stop suddenly, causing a risk of loss of control or falls. Damage to
the board due to water exposure is not covered under warranty. Keep your
fingers, hair, and clothing away from belts, motors, wheels and all moving parts.
Do not open or tamper with electronics housings.
Electric shock is possible and this also voids the warranty.
ONLY CHARGE USING A LYCAONBOARD CHARGER. OTHER
CHARGERS MAY POSE RISK OF FIRE.
Warnings

LYCAON BOARD
33
Board Diagram
Nose
Truck
Front Wheel
Maple Deck
Hub Motor Wheel
Power Button
Battery Enclosure
Charge Port
Heat Sink
Tail

LYCAON BOARD
4
Remote Diagram
Power Button
Display Screen
Switch Button
Model Logo
Charge Port
Press to switch speed mode
Double-press to switch marching direction
Select options after paring
Note: To switch speed mode, you’ll have to get the
throttle trigger in neutral position(zero throttle).
Hold to Turn on/off
Press to confirm options
38
L
km/h
0.5hm
16.7hm
T:
0:
R B
Brake Intensity changes with speed modes
Speed Mode: Low (L)
①
②
Medium (M)
High (H)
Pro Mode (P)
Battery Status of The Remote/ Board
Back/Forth
Speed
Speed Mode Cumulate Mileage
Single Mileage
Accelerate
Thumb Throttle
Brake

LYCAON BOARD
5
Connecting (Pre-paired with Board)
①Charging the board: Connect the charger to the skateboard, it will enter into
charging state automatically with the red indicator light on.
When properly charging the light on the charger will turn red. When charging is
complete the light will turn green.
②Charging the remote: When charging the remote control, the remote vibrates
shortly once. The screen displays the charging progress in real time.
Note: Either the remote or the board could not be operated or would not work in
the charging state.
1. Keep the remote and the board powered off.
2. Hold the power button of the board and that of the remote at the same time for
about 5 seconds.
3. The remote control will display a successful pairing prompt with two short
vibration and one long vibration when pairing is successful.
4. Speed, mileage unit and wheels diameter shall be selected when the remote got
paired with the board. Press Switch Button to switch options, and press
Power Button to confirm. Re-pairing remote allows to reset all the options.
5. After wheels diameter option is selected, the remote will enter into main
function interface.
Charging the Board and the Remote

LYCAON BOARD
6
Pre-Ride Checklist
Always wear a helmet. Other protective equipment such as gloves, pads,
closed-toe shoes, long sleeves, and long pants are recommended.
Ride in an open, flat area without foot or car traffic for your first rides. Also
make sure the speed mode and marching direction are set to your respon-
sive way.
Read through the warnings on the first two pages of this manual.
Avoid environments that can cause loss of control including loose gravel,
water, hills, cracks, train tracks, traffic, low light, or poor visibility.
Regularly check and tighten all hardware.
AVOID THESE THINGS THAT CAN CAUSE SLIPPING:
AVOID THESE THINGS THAT CAN CAUSE TRIPPING:
AVOID THESE THINGS THAT CAN CAUSE COLLISIONS:
GRAVEL
CRACKS
WATER UPHILL DOWNHILL
LARGER ROCKS TRACKS
TRAFFIC NIGHT TIME OBSTACLES POOR VISIBILITY
GRATES/DRAINS

LYCAON BOARD
7
Riding "Regular" means you stand with your left foot forward, towards the nose
of the board. Riding "Goofy" means you stand with your right foot forward. How
do you know which one you are? Think about a tug-of-war - whichever foot you
would put forward when competing in a tug of war to brace yourself, that is the
foot you should put forward when riding. Test and see what works best for you.
Riding Stance
Regular Stance Goofy Stance

LYCAON BOARD
8
Accelerating
First, bend your knees and shift your weight forward towards the board's nose.
Gently extend your thumb to push the Thumb Throttle away from you until the
motors begin to engage. The further you roll the Thumb Throttle forward, the
faster Lycaon Board will go. At any time you can release the ThumbThrottle to
coast or roll it backwards to brake.
Braking
When you are ready to brake make sure
to bend your knees and shift your
weight to the rear of the deck. Gently
roll the Thumb Throttle downwards
until you feel the board's motors begin
to actively slow the board down. For
additional braking power roll the
Thumb Throttle downward at a faster
rate, but be sure your stance is prepared
so you don't lose your balance and have
to step off the board.
Riding the LycaonBoard
Accelerate
Throttle
Brake

LYCAON BOARD
9
Double-press to switch
marching direction
Coasting
To coast, simply release the Thumb Throttle. This will cut power to the motors
though you still will feel added friction from the drive train.
Reverse
To switch the board into Reverse,
double-press the Switch Button ,
and you'll see the ↑/↓ arrow switching
directions on the display screen.
Now, roll the Thumb Throttle up to
go in reverse and down to brake
(slowing down your reverse speed).
The board must be stationary to
change between forward and reverse.
If you double-press the Switch
Button while moving, the board
will be unresponsive to Remote input
until either the board comes to a stop
or the Switch Button is pressed again
to re-engage power in the forward
direction.

LYCAON BOARD
10
Remote Warning Instruction
1) Battery low voltage warning
When the battery of remote control is less than 10% (enough for 30 minutes at
most), the screen of remote control indicates that the power is less than 10%,
accompanied with a double long vibration. When the battery is only 5% (enough
for 15 minutes). The remote control reminds that the power is less than 5%,
accompanied with a double long vibration. When the battery is lower than safe
voltage (3.4V) and connected with skateboard and the skateboard stops, the
remote control will have a short vibration and power off automatically.
When the battery of skateboard is lower than 25%, the screen of remote control
indicates the battery is lower than 25%, accompanied with a double long vibra-
tion. When the battery of skateboard is lower than 10%, the remote control
indicates that the battery is lower than 10%, accompanied with a double long
vibration. When the voltage is lower than safe voltage, the power output will be
turned off and you should brake immediately at this time.
Note: When the battery of remote control or skateboard starts to remind for the
second time, you’d better stop using it and charge related devices to avoid
damage lithium battery due to over discharge.
2) Signal loss warning
When the signal is lost suddenly, the screen of the remote control indicates
disconnection, accompanied with a short vibration. If the skateboard is accelerat-
ing, the acceleration will first stop slowly, then automatically brake slowly. If the
skateboard is not accelerating, it will brake slowly. If the signal is lost, the remote
control will search the device of skateboard. If it succeeds in searching and recon-
necting, the remote control will have a short vibration, the slow brake will be
cancelled and return to normal operation.

LYCAON BOARD
11
3) Lock-up warning
When the motor is lock-up or completely struck, the remote control will have
continuously and intermittently short vibration, and the screen of remote control
indicates motor lock-up. If that happens, the user should stop using skateboard
and check the motor to see if there is foreign matter struck in it, remove the
foreign matter before operating the skateboard again.
4) Overheating warning
When the operating temperature of motor is higher than 100℃ or lower than 0℃,
the remote control vibrates once and the screen indicates overheat and the motor
will stop working.
Note: The user should pay attention to the temperature of motor. When the motor
temperature is too high, the user should stop using it and wait until the tempera-
ture drops.
5) Overcurrent warning
When the operating current of motor exceeds allowed value, the screen of remote
control indicates overcurrent and the motor will stop working.
Note: Turn off the skateboard and turn it on again, and use it only when the
current returns to normal.

LYCAON BOARD
12
Remote Control Specification
Technical Parameters of Lycaon GR
3.7V/200MAH
USB Type-C
0.5H
2.4G
40m（Open area）
Board dimension (subject
to the real product)
940MM*230MM* 12.5MM
Length*Width*Thickness
780MM
8.6kg
106MM
20-30%
Board material: 8-layer Canadian maple board
thickness: 12.5MM
45° 7 inches, high-strength
aluminum-magnesium alloy
Air-permeable abrasion-proof silicon
carbide paper
High-elasticity SHR83A PU shock absorber
Wheel base
Total weight
Climbing Angle
Abrasive paper
Shock absorber
Board material and
thickness
Bridge material
and dimension
Ground clearance of
board surface
Product
Specification
60g
Battery Voltage/Capacity
Product
Parameter Model Double-drive 36V Skateboard
Charging Port
Charging Time
Communication Mode
Remote Control Distance
Weight

LYCAON BOARD
13
100kg
12-50 years old
L (Low) : 12 mph / 20 kph
H(High) : 25 mph / 40 kph
M(Medium) : 18 mph / 30 kph
Max.load
Target users
Top Speed
in 4 Speed Modes
Range:
Battery type
Motor type
Rated output power
Torque
Max. instantaneous
power
Rated voltage
Standard voltage
Battery capacity
15-25 miles/ 24-40 km(Depending on riding style, weight,
terrain and weather)
18650 Li-ion Battery
36V
10S3P 7.5Ah 270Wh
480W*2
6Nm
1200W
36v
Double-drive brushless hub motor 90*54mm
SHR83A PU rubber coating
Product
Performance
Battery
Parameters
Motor
Parameters
High-elasticity PU wheel (black)
90*54mm SHR83A rubber coating
HCH 608RS ABEC-7
Type
Specification
Bearing
PU wheel
Pro (Top Speed): 25 mph / 40 kph( Instantaneous Acceleration)

LYCAON BOARD
14
AC100-240v 50/60Hz
DC42V 2.5A
Input voltage
Output voltage
and current
3-4 hours
Charging time
EBSElectronic brakeBake Method
Charger
Parameters
Over-voltage / Under-voltage / Over-current / Short
circuit / Overheat / Auto sleep, wake-up
Intelligent BMS
Protection
Measures
Charge Temperature Range: 10-40°C
Operating Temperature Range: 0-40°C

LYCAON BOARD
15
Packing List
● Your new Lycaon GR Board
● Wireless Remote Controller
● Charger
● Charging Adapter
● T Tool
● Allen Wrench

Riding off curbs, doing jumps/hops, throwing the front down to the pavement,
and subjecting the board to other high-impact events may damage internal
electronic components over time. Any amount of water has the potential to
damage the board's electronics, and water damage is not covered under warranty.
We highly recommend that you regularly inspect and maintain the board before
riding.
For more detailed maintenance tips, please visit our website:
https://lycaonboard.com/blogs/maintenance
LYCAON BOARD
16
Proper Use of the Board:
This board is covered by a 240 day manufacturer's warranty that covers defects in
workmanship and material. This does not cover damage caused by abuse, misuse,
negligence, accident, or riding in water.
LycaonBoard offers warranty against defects in workmanship and/or materials to
the original purchaser. If there are any manufacturing defects, we are responsible
for troubleshooting, and offering free repair service or sending replacement parts
to fix issues, not including issues caused by any personal behaviors.
Limited Warranty:
Please keep your shipping box. The warranty does not include damage from
shipping in insufficient packaging.
For more detailed warranty policy, please visit our website:
https://lycaonboard.com/pages/warranty
For all Return and Warranty Shipping: