ARTICLE # 483.01.699
HÄFELE AUSTRALIA PTY. LTD 8 MONTEREY RD DANDENONG VIC 3175
730.83.617
MADE IN ITALY
1. Place the adaptor over one
“wing” of the mounting plate.
Use the front stop for the
correct depth positioning.
3. Insert the Smove piston
assembly, sliding it in the
direction indicated by
the arrow.
2. Fix the adaptor in position
using woodscrews.
3
Assembly instructions
Place the adapter over one “wing” of the mounting plate.
Use the front stop for the correct depth positioning.
Fix the adapter in position using woodscrews.
Insert the Smove piston assembly, sliding it in the direction
indicated by the arrow.
It is possible to reduce or increase the decelerating eect by
turning the screw indicated.
To remove the Smove piston assembly, insert a screwdriver in the indicated slot and prise it o.
3
Assembly instructions
Place the adapter over one “wing” of the mounting plate.
Use the front stop for the correct depth positioning.
Fix the adapter in position using woodscrews.
Insert the Smove piston assembly, sliding it in the direction
indicated by the arrow.
It is possible to reduce or increase the decelerating eect by
turning the screw indicated.
To remove the Smove piston assembly, insert a screwdriver in the indicated slot and prise it o.
3
Assembly instructions
Place the adapter over one “wing” of the mounting plate.
Use the front stop for the correct depth positioning.
Fix the adapter in position using woodscrews.
Insert the Smove piston assembly, sliding it in the direction
indicated by the arrow.
It is possible to reduce or increase the decelerating eect by
turning the screw indicated.
To remove the Smove piston assembly, insert a screwdriver in the indicated slot and prise it o.
4. It is possible to reduce or
increase the decelerating
effect by turning the screw
as indicated.
5. To remove the piston
assembly, insert a
screwdriver in the indicated
slot and prise it off.
3
Assembly instructions
Place the adapter over one “wing” of the mounting plate.
Use the front stop for the correct depth positioning.
Fix the adapter in position using woodscrews.
Insert the Smove piston assembly, sliding it in the direction
indicated by the arrow.
It is possible to reduce or increase the decelerating eect by
turning the screw indicated.
To remove the Smove piston assembly, insert a screwdriver in the indicated slot and prise it o.
3
Assembly instructions
Place the adapter over one “wing” of the mounting plate.
Use the front stop for the correct depth positioning.
Fix the adapter in position using woodscrews.
Insert the Smove piston assembly, sliding it in the direction
indicated by the arrow.
It is possible to reduce or increase the decelerating eect by
turning the screw indicated.
To remove the Smove piston assembly, insert a screwdriver in the indicated slot and prise it o.
3
Assembly instructions
Place the adapter over one “wing” of the mounting plate.
Use the front stop for the correct depth positioning.
Fix the adapter in position using woodscrews.
Insert the Smove piston assembly, sliding it in the direction
indicated by the arrow.
It is possible to reduce or increase the decelerating eect by
turning the screw indicated.
To remove the Smove piston assembly, insert a screwdriver in the indicated slot and prise it o.
