H3C S5510 Series User manual

H3C S5510 Series Ethernet Switches
Installation Manual
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: T2-20080228-C-1.05

Copyright © 2006-2008, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H3Care, , TOP G, , IRF, NetPilot,
Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,
Storware, NQA, VVG, V2G, VnG, PSPT, XGbus, N-Bus, TiGem, InnoVision and
HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their
respective owners.
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.
To obtain the latest information, please access:
http://www. h3c.com
Technical Support
[e-mail]
http://www. h3c.com

About This Manual
Related Documentation
In addition to this manual, each H3C S5510 Series Ethernet Switches documentation
set includes the following:
Manual Description
H3C S3610&S5510 Series Ethernet
Switches Operation Manual It is used for assisting the users in data configurations and typical applications.
H3C S3610&S5510 Series Ethernet
Switches Command Manual It is used for assisting the users in using various commands.
Organization
H3C S5510 Series Ethernet Switches Installation Manual is organized as follows:
Chapter Contents
1 Product Overview Introduces the characteristics and
technical specifications of S5510 Series
Ethernet Switches.
2 Installation Preparation Introduces the installation preparation and precaution of S5510 Series
Ethernet Switches.
3 Installing the Switch
Introduces the procedures to install an
S5510 Series Ethernet Switch, including
the setup of the mainframe, cards and
cables.
4 Starting up the Switch at the Initial
Boot
Introduces the booting process of an
S5510 Series Ethernet Switch, including
the power-on booting of the switch and
the system initialization.
5 Loading Boot ROM and Host Software Introduces how to load Boot ROM and
host software for an S5510 Series
Ethernet Switch.
6 Maintenance and Troubleshooting
Introduces the problems that might
occur during the installation and the
booting of an S5510 Series Ethernet
Switch and the related solution.
Appendix A Lightning Protection of the
Switch Introduces lightning protection of S5510 Series Ethernet Switches.

Conventions
The manual uses the following conventions:
I. Command conventions
Convention Description
Boldface The keywords of a command line are in Boldface.
italic Command arguments are in italic.
[ ] Items (keywords or arguments) in square brackets [ ] are
optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by
vertical bars. One is selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets
and separated by vertical bars. One or none is selected.
{ x | y | ... } *
Alternative items are grouped in braces and separated by
vertical bars. A minimum of one or a maximum of all can be
selected.
[ x | y | ... ] *
Optional alternative items are grouped in square brackets
and separated by vertical bars. Many or none can be
selected.
# A line starting with the # sign is comments.
II. GUI conventions
Convention Description
< > Button names are inside angle brackets. For example, click
<OK>.
[ ] Window names, menu items, data table and field names
are inside square brackets. For example, pop up the [New
User] window.
/ Multi-level menus are separated by forward slashes. For
example, [File/Create/Folder].
III. Symbols
Convention Description
Warning Means reader be extremely careful. Improper operation
may cause bodily injury.
Caution Means reader be careful. Improper operation may cause
data loss or damage to equipment.
Note Means a complementary description.

Environmental Protection
This product has been designed to comply with the requirements on environmental
protection. For the proper storage, use and disposal of this product, national laws and
regulations must be observed.