Habitat 847/2544 User manual

STYLE
CONCRETE
K
DES
Issue 1 - 03/05/16
Spare Parts
www.argos-support.co.uk
[e-mail]
0370 112 1928
Customer Support
0345 640 2020

1
Safety and Care Advice
Product Details
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before
starting.
Care and maintenance
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
•From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Additional Guidance
●Assemble all parts and bolts loosely during assembly, only once the product is complete should you
fully tighten the bolts.
●Regularly check and ensure that all bolts and ttings are tightend properly.
●Maximum user weight 50kg
●This product is compliant EN12521.
•This product has been constructed to
be used in the domestic environment
only and not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
Assemble the item as close
room) as possible.
Sainsbury's Argos is a trading name of both: Argos Limited, Registered oce: 489-499 Avebury Boulevard, Milton Keynes, United Kingdom, MK9 2NW,
registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered oce: 33 Holborn, London, EC1N 2HT, registered
number: 03261722 (England and Wales). Both companies are subsidiaries of J Sainsbury's plc.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
847/2544
CONCRETE STYLE DESK

2
DEF
A B C
15mm Bolt x 16
G
Allen Key x 1
HI
32mm camlock screw x 14 30mm Wooden dowel x 12 12mm Camlock nut x 14
14mm Screw x 12 38mm Screw x 6
(Ø7
20 mm )x16
Stickers
390mm Runner X 2
Fittings (Shown to scale)
Bag 1

3
1 2 3 4
5 6 7
Table Top x 1
( 114.9 x 47.9 cm )
Side Board x 1
( 47.8 x 9 cm )
Divider x 1
(46 x 9 cm )
Side Board x 1
( 47.8 x 9 cm )
Back Board x 1
(113 x 10 cm )
Bottom Board x 1
( 114.9 x 47.9 cm )
Leg x 4
(Φ3.8 x 63.3 cm)
8 9 10
11 12
Drawer Back Board x 1
( 43.1 x 7.8 cm )
Drawer Bottom Board x 1
(39.5 x 44 cm )
Drawer Left Side Board x 1
( 40 x 7.8 cm )
Drawer Right Side Board x 1
( 40 x 7.8 cm)
Drawer Front Board x 1
( 47.5 x 8.5 cm )
Panels

4
Phillips screwdriver
(small & medium)
Phillips screwdriver
(small & medium) Eye protection
(when using a
hammer or glue)
Ruler/tape
measure
Tools required
Rubber hammer
Power Drill