Habitat Heathdon User manual

Heathdon/
Lavendon
Spare Parts
www.argos-support.co.uk
Customer Support
[email protected]
0370 112 1928
0345 640 2020
Issue 2 - 11/10/22

Safety and Care Advice
Product Details
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough
space to layout the parts before
starting.
This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Care and maintenance
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
Assemble the item as close
to its final position (in the same
room) as possible.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste.Take to your local
authority waste disposal
centre.
2
4’ Bed Grey Fabric 954/0554 4’6 Bed Black PU 944/8010
4’ Bed Grey PU 943/2947 4’6 Bed Grey PU 940/6007
4’ Bed Black PU 951/4827
Important Ottoman Safety Warnings
Caution.This bed uses a pressurised mechanism.
Use caution when operating - Always use two hands at arm’s length, and only where illustrated on the
product.
You must ensure the mattress is on the bed frame before lifting the mechanism - Failure to do so may
result in injury.
Please ensure Children and pets are kept away from the bed when operating the bed mechanism.
If removing the mattress, make sure that the frame is secured as it could flip open.
Only use the storage compartment when when the frame is fully raised in the ‘up’ position.
No children or animals are left unattended when the frame is in the ‘up’ position.
Do not remain on the bed whilst the lifting mechanism is in use.
Beware of Entrapment - Keep both hands clear of mechanism when operating the mechanism.
When lifting the bed remove all bedding - Except the fitted sheet.
ENSURE MATTRESS IS ON
BEFORE LIFTING
DON'T LIFT WITHOUT MATTRESS
Sainsbury's Argos is a trading name of both: Argos Limited, Registered office: 489-499 Avebury Boulevard, Milton Keynes, United
Kingdom, MK9 2NW, registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered
office: 33 Holborn, London, EC1N 2HT, registered number: 03261722 (England and Wales). Both companies are subsidiaries of J
Sainsbury's plc. Argos (N.I.) Ltd, Forestside Shopping Centre, Upper Galwally, Belfast, United Kingdom, BT8 6FX. Argos Distributors
(Ireland) Limited, Unit7, Ashbourne Retail Park, Ballybin Road, Ashbourne, County Meath, Ireland.

Fittings (Shown to scale)
3
B
8x25mm Bolt x 488x45mm Bolt x 10
F
17mm Flat washer x 54
A
E
D
8mm Bolt x 4
C
Nut x 6
12mm Spring washer x 32
G
22mm Flat washer x 4
Note: All fittings packed inside the back of the headboard

9
4
Bentwood slats x 28 (4'-598 x 9 x 53mm)
Bentwood slats x 28 (4'6-675 x 9 x 53mm)
Note: Packed inside the back
of the headboard
5Hinge Mechanism (x 1 pair)
NOTE: PISTON ATTACHED
6
7Fabric base x 1 (4'-1965 x 1280mm)
(4'6-1965 x1430mm)
Note: Packed inside the back
of the headboard
Ottoman end frame (Headboard) x 1
(4'-1213 x 85mm)(4'6-1363 x85mm)
Note: Packed inside the back
of the headboard
11 Ottoman frame (Sides) x 2
(4'/4'6-1822 x 30mm)
8Mattress support bracket x 2
Note: Packed inside the back
of the headboard
1Side rail x 2
(4'/4'6-1930 x 305mm)
2 3 Headboard x1 (4'-1350 x 860mm)
(4'6-1500 x 860mm)
4
Footboard x1 (4'-1300 x 305mm)
(4'6-1450 x 305mm)
Note: Packed inside the back
of the headboard
10 Ottoman end frame (Footboard) x 1
(4'-1213 x 85mm)(4'6-1363 x 85mm)
Note: Packed inside the back
of the headboard
Parts
INSIDE
INSIDE
FRONT
Wooden rail x2 (4'/4'6-800 x 40mm)

Single slat caps x 28 (4'-55mm)
Single slat caps x 28 (4'6-55mm)
Note: Packed inside the back
of the headboard
5
12
Metal corner plate x 4 (169 x 35mm)
Note: Packed inside the back
of the headboard
14 15
16
Parts
13 Double slat caps x 14 (4'-55mm)
Double slat caps x 14 (4'6-55mm)
Note: Packed inside the back
of the headboard
Support Leg x 1 (25 × 205mm)
Note: Packed inside the back
of the headboard
Ottoman frame centre support x 1
(4'/4'6-1822 x 30mm)
Note: Extra holes

Ruler/tape
measure
Allen key (Supplied)
Spanner (Supplied)
6
Box spanner (Supplied)
Tools required

7
1
28x25mm Bolt x 12
B
17mm Flat washer x 12
F
12mm Spring washer x 12
D
Leave screws loose
2
3
B
F
D
B
F
D
B
F
3
B
F
2
D
D
Shown upside down
Unzip
3
B
8x25mm Bolt x 488x45mm Bolt x 10
F
17mm Flat washer x 54
A
E
D
8mm Bolt x 4
C
Nut x 6
12mm Spring washer x 32
G
22mm Flat washer x 4
WARNING!
The headboard is heavy.
Lift with care.
Components packed inside back of headboard

8
3
31
3
1
Do not fully tighten fixings!
5mm Allen key x 1
Ensure frame is square
8x25mm Bolt x 8
B
17mm Flat washer x 8
F
12mm Spring washer x 8
D
5mm Allen key x 1
2
3
3
2
1
1
16
B
FD
4
1
1
B
FD

9
5
Opening from right side
Beware of risk of entrapment
from folding hinges!
5mm Allen key x 1
Headboard fixing holes position Headboard fixing holes position
8x25mm Bolt x 10
B
17mm Flat washer x 10
F
8x45mm Bolt x 4
A
22mm Flat washer x 4
G
4'
4'6
Headboard fixing holes position
Footboard fixing holes position
Headboard fixing holes position
3
2
4
A
G
A
G4
5
5
F
B
F
B
R
F
IT
H
E
R
E
R
F
IT
H
E
R
E
L
F
I
T
H
E
R
E
L
F
I
T
H
E
R
E
R
F
I
T
H
E
R
E
R
F
IT
H
E
R
E
L
F
IT
H
E
R
E
L
F
I
T
H
E
R
E
Footboard fixing holes position
3
2
L
F
I
T
H
E
R
E
F
IT
F
I
H
E
R
E
L
FI
T
H
E
R
E
RR
RR
4
4
A
G
A
G
5
5
F
B
F
B
Footboard fixing holes position
3
R
F
I
T
H
E
R
E
R
F
I
T
H
E
R
E
L
F
IT
H
E
R
E
L
F
I
T
H
E
R
E
Footboard fixing holes position
3
2
2
L
F
I
T
L
F
I
T
H
E
R
E
R
F
I
T
H
E
R
E
R
F
I
T
H
E
R
E
L
F
I
T
H
E
R
E
L
F
I
T
H
E
R
E
L
F
I
T
H
E
RE
H
E
R
E
RR
RR

10
Headboard fixing holes positionHeadboard fixing holes position
Opening from left side
6
Beware of risk of entrapment
from folding hinges!
5mm Allen key x 1
8x25mm Bolt x 10
B
17mm Flat washer x 10
F
8x45mm Bolt x 4
A
22mm Flat washer x 4
G
4'
4'6
5
4
5
A
G
A
GF
B
F
B
Headboard fixing holes position
Footboard fixing holes position
Headboard fixing holes position
3
2
R
FI
T
H
E
R
E
R
F
I
T
H
E
R
E
L
F
I
T
H
E
R
E
L
F
I
T
H
E
R
E
R
F
IT
H
E
R
E
R
F
I
T
H
E
R
E
L
F
I
T
H
E
R
E
L
F
I
T
H
E
R
E
Footboard fixing holes position
3
2
R
R
E
R
F
I
T
H
E
R
E
R
F
I
T
H
E
R
E
T
4
LL
LL
5
4
4
5
A
G
A
GF
B
F
B
Footboard fixing holes position
3
R
F
IT
H
E
R
E
R
F
I
T
H
E
R
E
L
F
IT
H
E
R
E
L
F
I
T
H
E
R
E
Footboard fixing holes position
3
2
2
R
F
IT
H
E
R
E
R
R
E
R
F
IT
H
E
R
E
R
F
I
T
H
E
R
E
L
F
I
T
H
E
R
E
L
F
I
T
H
E
R
E
FI
T
H
R
FI
T
H
E
R
E
LL
LL

8mm Bolt x 4
C
7
11
Turn
Product
Velcro fastening
7
3
3
2
C
C
8

Upside down
12
9
a:
b:
c:
B
F
D
B
F
B
F
D
14
12
12
B
F
F
B
9
10
9
10
11
11
11
11
8
12
8x25mm Bolt x 18
B
17mm Flat washer x 18
F
12mm Spring washer x 12
D
5mm Allen key x 1
Holes
inside
Holes
inside

13
10
11
Important
Two people required.
Frame to be fully
supported at all times.
5
Box spanner x 1
A10
5
F
E
10
9
5
Beware of risk of entrapment
from folding hinges!
UP
3
5
17mm Flat washer x 6
F
Nut x 6
E
5mm Allen key x 1
8x45mm Bolt x 6
A
Spanner x 1

a: 15
6
Repeat
x14
4'/4'6
11
14
15
15 13
Slats to arch upwards
c:
12
14
12 11
11
15
15
13
15
b:
11
12
13 6
6
6
6
6 6