Habitat Chicago 303/3359 User manual

Chicago
Dining Chair
Issue 1 08/12/21
Spare Parts
www.argos-support.co.uk
[email protected]
0370 112 1928
Customer Support
0345 640 2020

1
Safety and Care Advice
Product Details
845/9550
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before
starting.
Care and maintenance
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
• From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste.Take to your local
authority waste disposal
centre.
Additional Guidance
●Assemble all parts and bolts loosely during assembly, only once the product is complete should you
fully tighten the bolts.
●Regularly check and ensure that all bolts and fittings are tightend properly.
●This product is compliant BS12520
•This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assemble the item as close
to its final position (in the same
room) as possible.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
847/8531
873/8305876/8186
825/2953
426/9610
404/4952
792/8848
854/6102
837/1975
826/9214
706/0861
730/6642
484/9401

Parts
2
Pt. No Pt. No Pt. No
1 2 3
Backrest Front leg Seat
Pt. No Pt. No
54 Side Rail Stretcher
Bag 1
Fittings (Shown to scale)
M6 x 50mm Bolt x 6
A
M4 x 32mm Screw x 7
D
Spring washer x 6
B
Wooden dowel x 6
C
Allen Key x 1
E
x2 x2
Tools required
Ruler/tape
measure
Phillips screwdriver
(small & medium)

3
1
C
Wooden dowel x 6
4
4
4
C
C
CC
C
C
C
C
2
4
4
4
2
2
A
A
B
B
A
B
M6 x 50mm Bolt x 6
A
M6 x 50mm Bolt x 2
B
Spring washer x 2 Allen Key x 1
E
E
M6 x 50mm Bolt x 6
A
M4 x 32mm Screw x 7
D
Spring washer x 6
B
Wooden dowel x 6
C
Allen Key x 1
E
WARNING!
FASTEN BOLTS USING
ALLEN KEY BUT DO NOT
FULLY TIGHTEN AT THIS
STAGE. USE OVAL HEAD
OF ALLEN KEY WHEN
TIGTHEN THE BOLTS ON
CORNER POSITIONS.

4
3
5
1
1
5
5
4
1
24
4
4
1
2
2
5
5
5

M6 x 50mm Bolt x 6
A
M6 x 50mm Bolt x 4
B
Spring washer x 4
6
E
Allen Key x 1
E
CAREFULLY TURN THE
CHAIR UPRIGHT AND
PLACE ON A FLAT
SURFACE.
MAKE ADJUSTMENTS
TO ENSURE THE
CHAIR FRAME IS
STRAIGHT AND THE
LEGS ARE EVEN ON
THE FLOOR THEN
FULLY TIGHTEN ALL
BOLTS ASSEMBLED IN
PREVIOUS STEPS
USING ALLEN KEY
E
E
Allen Key x 1
E
5
5
4
4
4
1
A
B
A
B
A
B
A
B
A
B
A
B
1
E
WARNING!
FASTEN BOLTS USING
ALLEN KEY BUT DO NOT
FULLY TIGHTEN AT THIS
STAGE. USE OVAL HEAD
OF ALLEN KEY WHEN
TIGTHEN THE BOLTS ON
CORNER POSITIONS.
WARNING!

6
2
3
3
4
4
4D
D
D
D
M4 x 32mm Screw x 3
D
7

7
8
1
1
2
5
5
5
D
D
D
D
D
M4 x 32mm Screw x 4
D
Turn
Product Assembly complete.