Habitat Compton 920/0698 User manual

Issue 1 - 16/09/20
Spare Parts
www.argos-support.co.uk
[e-mail]
0370 112 1928
Customer Support
0345 640 2020
Compton

1
Safety and Care Advice
Product Details
Compton Glass Display Unit
920/0698 Black
938/1892 White
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before
starting.
Care and maintenance
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only clean using a damp cloth
and mild detergent. Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
•From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Additional Guidance
●Assemble all parts and bolts loosely during assembly, only once the product is complete should you
fully tighten the bolts.
●Regularly check and ensure that all bolts and fittings are tighten properly.
●This product is compliant BS4875-7 level 3 & EN14749
•This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
Assemble the item as close
room) as possible.
Sainsbury's Argos is a trading name of both: Argos Limited, Registered office: 489-499 Avebury Boulevard, Milton Keynes, United
Kingdom, MK9 2NW, registered number: 01081551 (England and Wales); and Sainsbury's Supermarkets Limited, Registered
office: 33 Holborn, London, EC1N 2HT, registered number: 03261722 (England and Wales). Both companies are subsidiaries of J
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
WARNING
In order to prevent overturning this product must be used with the wall attachment device provided.

Fittings (Shown to scale)
2
Bag 1
T
Door Hinge x 3
U
246mm Runner x 4
Push Open Device x 1
S
E
6 x 30mm Dowel x 14
G
4 x 18mm Shelf Support x 12
D
7 x 39mm Locking Pin x 4
F
12 x 10.5mm Locking Nut x4
I
3 x 12mm Screw x 15
B
5 x 50mm Screw x 16
A
1.2 x 20mm Nail x 22
C
4 x 30mm Screw x 8
M
Wall Plug x 2
J
3.9 x 12mm Screw x 4
L
4 x 14.5mm Screw x 6
O
3.5 x 15mm Screw x 12
P
7 x 1.5mm Door Pad x 2
R
Plastic Support x 2
H
4 x 12mm Support Cover x 12
K
4 x 33mm Screw x 2
N
Wall Strap x 2
Q
Screw cover x 16
Hardware

3
Phillips screwdriver
(small & medium)
Phillips screwdriver
(small & medium) Eye protection
(when using a
hammer or glue)
Small
hammer
Large hammer
Pencil
Mallet
Set Square
Spirit Level
Ruler/tape
measure
Power Drill
Drill Heads
Tools required

4
Panels
1Top/Bottom (389 x 284mm)
2Bottom Front Support
(389 x 89mm)
3Fixed Shelf (389 x 284mm)
4Shelf (389 x 284mm)
5Bottom Back Support
(389 x 89mm)
6Plinth (389 x 59mm)
7Right Side
(286 x 1800mm)
8Left Side
(286 x 1800mm)
x2
x3

Panels
5
10 Drawer Front
(416 x 180mm)
15 Upper Back
(798 x 415mm)
16 Lower Back
(938 x 415mm)
Drawer Back
(357 x 106mm)
Drawer Right
(240 x 106mm)
Drawer Left
(240 x 106mm)
Drawer Bottom
(366 x 236mm)
9Door (418 x 1369mm)
11
12
13
14
x2
x2
x2
x2
x2

1
6
L
4 x 14.5mm Screw x 4
E
6 x 30mm Dowel x 2
R
Plastic Support x 2
2
SS
I
3 x 12mm Screw x 3
X
Y
S
Push Open Device x 1
E
6 x 30mm Dowel x 8
Push Open Device x 1
S
E
6 x 30mm
Dowel x 14
G
4 x 18mm Shelf Support x 12
D
7 x 39mm Locking Pin x 4
F
12 x 10.5mm Locking Nut x 4
I
3 x 12mm Screw x 15
B
5 x 50mm Screw x 16
A
1.2 x 20mm Nail x 22
C
4 x 30mm Screw x 8
M
Wall Plug x 2
J
3.9 x 12mm
Screw x 4
L
4 x 14.5mm
Screw x 6
O
3.5 x 15mm Screw x 12
P
7 x 1.5mm Door Pad x 2
R
Plastic Support x 2
H
4 x 12mm Support Cover x 12
K
4 x 33mm
Screw x 2
N
Wall Strap x 2
Q
Screw cover x 16
R
E
E
6
3
15
6
2
L
E
E
E
E
E
S
I
E
LL
L
R
R
Repeat
x2

7
3U
246mm Runner x 4
Finished edge
U
I I
I
3 x 12mm Screw x 12
T
Door Hinge x 3
O
3.5 x 15mm Screw x 6
U
U
U
U
I
I
I
I
I
I
I
I
I
II
I
7
8
T
T
T
T
O
O
OO
OO
O
O
Finished edge
I
IU
1.7cm

8
4
5
Unfinished edge
Unfinished surface
B
5 x 50mm Screw x 16
A
1.2 x 20mm Nail x 22
1
3
15
7
16
5
7
15
2
8
B
B
B
B
B
B
B
B
B
B
B B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
AA
AA
A
A
A
A
B
B
B

6
Rotate
Product
9
G
4 x 18mm Shelf Support x 12
H
4 x 12mm Support cover x 12
N
Wall Strap x 2
K
4 x 33mm Screw x 2
L
4 x 14.5mm Screw x 2
M
Wall Plug x 2
Wall hole
TOP PANEL
HGHG
8
7
1
H
M
NL
K
G