Habitat HATTIE HATT-OK-SS20-A User manual

0344 499 4686
HATTI 150cm Ottoman Bed
E
Width - 163.5cm
Length - 214cm
Height - 123cm
HATT-OK-SS20-A

3 - 4.
Care Instructions for Upholstered Items
General information
Maximum weight limit
Important – Please read these instructions fully before starting assembly
Vacuum or brush your upholstery
weekly as accumulated dirt will
accelerate wear and dull colours.
Avoid exposing your furniture to
direct and prolonged periods of
sunlight and heat sources as fading
may result.
Take extra care when handling sharp
objects near the product that may
damage the fabric.
SPOTS AND SPILLS DO NOT RUB.
Carefully soak up any spillage by
gently blotting with a clean, dry,
absorbent cloth.
Do not use a wet cloth.
PROFESSIONAL CLEAN ONLY
Covers should be cleaned
professionally by an upholstery
cleaning specialist.
Dispose of all packaging carefully
and responsibly.
From time to time check that there
are no loose screws on this unit.
This product should not be discarded
with household waste. Take to your
local authority waste disposal centre.
We do not
recommend the
use of power drill/
drivers for inserting
screws, as this could
damage the unit. Only use hand
screwdrivers.
Parts of the assembly
will be easier with 2
people
12
Safety and Care Advice
Important – Please read these instructions fully before starting assembly
If for any reason you should have
problems with your Habitat product,
please contact the store from which
you purchased it.
Please retain your receipt as proof of
purchase.
If you have any comments or
suggestions regarding this product,
assembly instructions or service
General Care Instructions
This product should not be discarded
with household waste. Take to your
local authority waste disposal centre.
Colour variation may occur between the
cleaned and uncleaned sections.
When cleaning, please ensure all
components are cleaned at the same
time to avoid colour variation.
300 KG
2

Important Ottoman Safety Warnings
Caution. This bed uses a pressurised mechanism.
Use caution when operating -Always use two hands at arm’s length, and only
You must ensure the mattress is on the bed frame before lifting the mechanism
-Failure to do so may result in injury.
Please ensure Children and Pets are kept away from the bed when operating
If removing the mattress, make sure that the frame is secured as it could flip
Only use the storage compartment when the frame is fully raised in the ‘up’
No children or animals are left unattended when the frame is in the ‘up’ position
Do not remain on the bed whilst the lifting mechanism is in use.
Beware of Entrapment –Keep both hands clear of mechanism when operating
the mechanism.
When lifting the bed remove all bedding –Except the fitted sheet.
where illustrated on the product.
the bed mechanism.
open.
position.
3

Components - Panels 0344 499 4686
Headboard x1
1. Footboard x1
2.
Side Rail x2
3.
Baseboards x4
4.
1/31/4
1/32/4
1/33/4
Slat Frame x1
5.
Slat Framex1
1/34/4


6.
Hattie Bed
4

Bolts (8*45) x 8
uts x 12
Components - Fittings 0344 499 4686
Fittings contained
in pack 2 of 4
ABCD
E F
Gold Bolts (8*18) x8
Bolt (8*25) x 16
GH
I
Allen key x1
Belt x 1 Mattress holder x 1
2/4
Brackets x 8 Stick Felts x 8
Spanner x 1
K
Bolts (8*80) x 4
5

Assembly Instructions
Step 1
A
1
A x 8
2
6

3
Assembly Instructions
Step 2
B
2
B x 1
1
3
1/2
3
7
Framemustbesquare

Assembly Instructions
Step 3
C x 8 D x 8 E x 1
6
1
2
3
3
C
D
E
8

Assembly Instructions
Step 4
9
The nuts and washers already in position
on the bracket.

Assembly Instructions
Step 5
B x 1 F x 4 G x 4 x 1
B
G
F
5

6
H
H
10

Assembly Instructions
Step 6
B x 1 F x 8 I x 8 x 1
 x 1
B
I
F
H
H
11

Assembly Instructions
Step 7
4
12

Assembly Instructions
Step 8
K x 1
K
13