Habitat ETTA BE-SS19-A User manual

sseml nstructionsPlease keep for future reference
mortantPlease read these instructions before assembly
If you need help or have damaged or missing partsemail
[e-mail]or call0344 499 4686
imensions
ools reuired
 Bench
habitat
 142
 -
 4
ETTA_BE-SS19-A


1/6
Ver11.03.2020

-4.
Remove all fi ttings from the plastic bags and
separate them into their groups.
Keep children and animals away from the work
area, small parts could choke if swallowed.
Make sure you have enough space to layout the
parts before starting.
Do not stand or put weight on the product,this could
cause damage.
Assemble the item as close to its fi nal position (in
the same room)as possible
Do not place furniture directly in front of radiators, fi
res or any other source of heat.
Parts of the assembly will
be easier with 2 people
Assemble on a soft level surface to avoid damaging
the unit or your floor
We do not recommend the
use of power drildrivers
for inserting screwsas
this could
damage the unit.Only use hand screwdrivers.
Dispose of all packaging carefully and responsibly
Only clean using a damp cloth and mild detergent
do no use bleach or abrasive cleaners
From time to time check that there are no loose
screws on this unit
This product should not be discarded with
household wasteTake to your local authority
waste disposal centre
Regular dusting with a dry cloth will keep your units
clean.
Clean marks with a damp cloth
Do not allow spillages to stay on the surface for long
To remove stubborn stains, wipe over with a damp
cloth and washing up liquid
Do not use abrasive cleaners
Do not cleanwith productscontainingthe
following:Acetone
e.g nail varnish removerAmmoniae.g.bleachor
Sodium hydroxide
e.g. Caustic soda, drain and oven cleaners
In the event of accidental contact with aggresive
cleaners, rinse thoroughly with water.
Use place mats to protect the surface from moisture
and heat.
If for any reason you should have problems with
your Habitat product, please contact the store from
which you purchased it.
Please retain your receipt as proof of purchase
If you have any comments or suggestions regarding
this product, assembly instructions or service
received,please contact the store or Habitat Head
Offi ce via its web site:
Safety and Care Advice
ImportantPlease read these instructions fully before starting assembly
Check you have all the components and tools listed
on the front cover and pages 3
www.habitat.co.uk
or write directly toHabitat Retail Ltd. 489-499
Avebury Boulevard,
Milton Keynes MK9 2NW
Cleaning and care of lacuered surfaces Maximum weight limit
General are an
maintenane
General information

300
2/6
Ver11.03.2020

Components - Panels If you need help or have damaged or missing parts, email:
[e-mail] or call: 0344 499 4686
Please check you have all the panels listed below
BCNote: There are ‘Batch Code’ lables where shown on the indicated items, these should be retained.
BC
1of 1
A
B
B
BC
B
B
3/6
Ver11.03.2020

Components - Fittings If you need help or have damaged or missing parts, email:
[e-mail] or call: 0344499 4686
Please check you have all the panels listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more fi
ttings may be supplied than are required.
Ruler - To help correctly identify the fi xings
0 10 20 30 40 50 60 70 80 90 100 110 120
Screws x 8pcs
Fittings
Felt x 4pcs
Connector x 4pcs
Key x 1pcs
A1 A2
Washer x 8pcs
Nut 8pcs
A3
A4A5A6
4/6
Ver11.03.2020

Assembly Instructions
Step 1
A1 x 4A2 x 8
A1
A2
A1 x 4A2 x 8
A2
A2 A2
B
BB
B
5/6
Ver11.03.2020

Assembly Instructions

A
B
B
B
B
 x 4
 x 
 x  4 x x 




4




6/6
Ver11.03.2020