Habitat Morillo reeded 1176555 User manual

Morillo reeded
glass display

Care and maintenance
Use a dry cloth to clean the
product, furniture polish is
not recommended.
From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household waste.
Take to your local authority
waste disposal centre.
The door with tempered glass,
please handle with care.
Clean glass with a damp cloth.
Use only water/glass-cleaner.
Wipe dry with clean a cloth.
If the glass is chipped or broken,
stop using the product.
Do not place very hot or very
coldandle with care items directly
on glass surfaces.
Do not sit or stand on glass surfaces.
Do not strike the glass with hard or
pointed items, or use the glass as a
chopping surface.
Do not use abrasives cleaning
agents,as these may scratch the
glass. Always supervise young children
around glass products.
In exceptional circumstances
a scratched surface or damaged
edge may cause the glass to
break unexpectedly. The glass in
this product is designed to break
into small fragments rather than
large/sharp pieces. Avoid impacts
on the side or edges of the glass,
as this is where the glass is most
vulnerable.
2
Argos Limited, 489-499 Avebury Boulevard, Milton Keynes, MK9 2NW. Argos (N.I.) Ltd, Forestside Shopping Centre, Upper Galwally,
Belfast, United Kingdom, BT8 6FX. Argos Distributors (Ireland) Limited, Unit 7, Ashbourne Retail Park, Ballybin Road, Ashbourne,
County Meath, Ireland.
MORILLO REEDED GLASS DISPLAY BLACK 1176555
MORILLO REEDED GLASS DISPLAY BLUE 2009322
Safety and Care Advice
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before
starting.
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
Assemble the item as close
room) as possible.
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
to its final position (in the same
unit or your floor.
Additional Guidance
●Assemble all parts and bolts loosely during assembly, only once the product is complete should you
fully tighten the bolts.
● Regularly check and ensure that all bolts and fittings are tightend properly.
•
● This product is compliant BS 4875-7 & EN 14749.
● Keep the instructions for furture reference.
Maximum loading weight 50 kg, Shelf maximum loading weight 10 kg.

3
A
x23
BD
x 4
Adjustable Foot
(M6x10mm)Screw
C
x 4
Magnetic Suction
x12
(M5x12mm)Screw
E
x6
F
H
x 3
(M6)Nut
Bolt
G
x 2
(M4x25mm)Screw
x2
Door Handle
J
L
x 1Door Stopper
K
x 1
Spanner
N
x6
(M3x10mm)Screw
M
(M8)
Wall Mount Webbing x2

(335 x1408mm)
4
(335 x1408mm)
2
(700x335mm)
Top
5
(336x1402mm)
Back
7
(343x1402mm)
Back
(349x1430mm)
Door
(349x1430mm)
Door
(660x335mm)
Bottom
(289x697mm)
Shelf x3
4
Leg x4
6

5
Turn
Product
B
x2
(M5x12mm)Screw
Do not fully tighten the screws until the last step.
80%
Max
Holes at back

6
A
x4
(M6x10mm)Screw
5
A
Holes at front

7
A
x16
(M6x10mm)Screw
After fully assembled, part D can be loosen to make the unit stable on uneven floor.
D
x
Adjustable Foot 4
A
Repeat
x4
6
D

B
8
B
x5
(M5x12mm)Screw
Rotate
Product
Turn
Product
7
Wall Mount Webbing x1
B

9
A
x3
B
(M6x10mm)Screw x5
(M5x12mm)Screw
H
x 3
(M6)Nut x 1
Spanner
8
A
B
H
Wall Mount Webbing x1
B
J

10
Rotate
Product

11
EFG
C
x 4
Magnetic Suction
N
410
F
G
CN
The groove on the handle
should face down.
E
Repeat
x6
WARNING!
Part Ex3 on each door need to
put in place at the same time.

12
x 1
Door Stopper
L
x 2
(M3 x 10mm)Screw
Do not fully tighten the screws before part K is in the
correct position where the doors can be closed tightly.
After all the parts are positioned,
you can now fully tighten all screws
fixed on previous steps.
100%
Max

13
WARNING!
Wall
WARNING: To prevent
possible overbalancing this unit
must be secured to a wall using
the overbalance protector kit
supplied.
A unit that is allowed to topple
can cause serious or fatal injury.
In addition to wall fixing the unit,
place heavy items on the lower
shelves, do not put any heavy
objects on top of the unit and
never allow children to climb or
hang on drawers, doors or
shelves.
·
·
MAX
10kg
MAX
10kg
MAX
10kg
MAX
10kg

14