Habitat NEL User manual

NEL
Issue 1 - 02/03/22
Spare Parts
www.argos-support.co.uk
[e-mail]
0370 112 1928
Customer Support
0345 640 2020

1
Safety and Care Advice
Product Details
Nel bookcase oak 3415960
Nel bookcase black 2158541
Keep children and animals
away from the work area, small
parts could choke if swallowed.
Make sure you have enough space
to layout the parts before
starting.
Care and maintenance
IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Only clean using adamp cloth
and mild detergent.Do not use
abrasive cleaners.
Use a dry cloth to clean the
product, furniture polish is
not recommended.
From time to time check that there
are no loose screws, nuts or bolts.
If there are please re-tighten.
This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Additional Guidance
Assemble all parts and bolts loosely during assembly, only once the product is complete should you
fully tighten the bolts.
Regularly check and ensure that all bolts and fittings are tightend properly.
•
This product is compliant EN14749, BS4875-7.
Any additional or replacement parts are obtained from the manufacturer.
This product has been
constructed to be used in the
domestic environment only and
not for commercial purposes.
Assemble on a soft level
surface to avoid damaging the
unit or your floor.
Assemble the item as close
room) as possible.
to its final position(in the same
We do not
recommend the
use of power
drill/drivers for
inserting screws
as this could damage the unit.
Only use hand screwdrivers.
Parts of the assembly will be
easier with 2 people.
Dispose of all packaging
carefully and responsibly.
Maximum loading weight 45kg/per layer.
Made in China for Habitat. Argos Limited, 489-499 Avebury Boulevard, Milton Keynes, MK9 2NW. Argos (N.I.) Ltd, Forestside Shopping Centre,
Upper Galwally, Belfast, United Kingdom, BT8 6FX. Argos Distributors (Ireland) Limited, Unit 7, Ashbourne Retail Park, Ballybin Road, Ashbourne,
County Meath, Ireland.

Bag 1
Fittings (Shown to scale)
2
M4 Alley Key x 1
A
Ø10*15mm Nut x 12
C
M6*40mm Bolt x 38
D
E
25mm Foot Pad x 4
G
LShap Bracket x 2
F
15mm Screw x 2
B
M6*70mm Bolt x 12
H
Ø8*30mm Wooden Dowel x 12

3
Tools required
Phillips screwdriver
(small & medium)
Phillips screwdriver
(small & medium) Eye protection
(when using a
hammer or glue)
Pencil
Mallet
Set Square
Spirit Level
Ruler/tape
measure
Power Drill
Drill Heads
Ladder

Panels
4
Side Frame x 2
(1800 x 420mm)
1
Rail(775 x 35mm) x 62
Shelf Panel(900 x 165mm) x 44
Shelf Panel(900 x 165mm) x 63

5
1
G
A
Ø10*15mm Nut x 12
B
M6*70mm Bolt x 12
A
M4 Alley Key x 1
A
Ø10*15mm Nut x 12
C
M6*40mm Bolt x 38
D
E
25mm Foot Pad x 4
G
L Shap Bracket x 2
F
15mm Screw x 2
B
M6*70mm Bolt x 12
B
2
1
1
2
2
2
2
2
Warning!
Please do not fully tighten the bolts
in this step.
H
Ø8*30mm Wooden Dowel x 12 H
Ø8*30mm Wooden Dowel x 12
H

6
C
M6*40mm Bolt x 38
2
3
D
25mm Foot Pad x 4
C
Peel off
the back
1
2
D
D
G
4
Dx4
3
Warning!
Fully tighten all the bolts.
100%
G
4
4
4
3
3
3
3
3

7
Rotate
Product
WARNING!
4F
LShap Bracket x 2
E
15mm Screw x 2
F
E

8
•WARNING: To prevent
possible overbalancing this unit
must be secured to a wall using
the overbalance protector kit
supplied.
•A unit that is allowed to topple
can cause serious or fatal injury.
In addition to wall fixing the unit,
place heavy items on the lower
shelves. do not put any heavy
objects on top of the unit and
never allow children to climb or
hang on drawers,doors or shelves.
Turn
Product WARNING!
Wall
Wall
Leg Frame
Assembly is complete.
leg
frame

A Guide to - Wall Mounting & Fixings
Revision 2 - 7/10/09
Important note:
Types of walls
Care &
Maintenance
No.1 “General Purpose” wall plug
No.6 “Shield Anchor” wall plug
Heavy loads
No.3 “Cavity Fixing” wall plug
No.4 “Cavity Fixing-Heavy Duty”
wall plug
No.5 “Hammer Fixing” wall plug
No.2 “Plasterboard” wall plug
Generally aerated blocks should not
be used to support heavy loads, use
loads, general purpose wall plugs can
be used.
For use with heavier loads such as TV
& HiFi speakers and satelite dishes etc.
For use with plasterboard partitions or
hollow wooden doors.
heavy loads such as shelving, wall
cabinets and coat racks.
For use with walls stuck with
is secure to the retaining wall.
For use when attaching light loads on
to plasterboard partitions.
Safety: Always check the fitting
and location to ensure your safety
in and around the home.
Fitting: From time to time check
the fitting to ensure the wall plugs
or screws do not become loose.
You can use one of the following types of wall plug if your walls are made
of brick, breeze block, concrete, stone or wood.
Important: When drilling into walls always
check that there are no hidden wires or pipes etc.
Hints:
1: General rule: Always use a larger screw and wall plug
if you are not sure.
2: Ensure you use the recommended drill bit to match the wall
plug and hole size.
3: Ensure you drill the hole horizontally, do not force the drill or
enlarge the hole.
4: Take extra care when drilling high walls, ceilings and ceramic
tiles. Ensure wall plugs are inserted beyond the thickness of
the ceramic tiles to avoid the tiles splitting or cracking.
5:
drilled hole.
If plastic wall plugs
are supplied with your
product:
Make sure that the screws and wall plugs being used
are suitable for supporting your unit. Consult a qualified
tradesperson if you are unsure.
- these are only suitable for
use in masonry walls.
If you are in any doubt about
the correct wall plugs for
your wall, seek professional
advice.
Failure of the product due to
responsibility of the installer.