Haier SYJS-0308 User manual

HomeMRVService Manual
2003.08
SYJS-0308

CONTENT
1. DESCRIPTION OF PRODUCTS & FEATURES
1.1 Nomenclature
1.2 Combination of indoor and outdoor
1.3 Models of indoor and outdoor units
1.4 Character of products
1.5 Cooling and heating capacity curves
2. SPECIFICATIONS
3. MECHANICAL DATA
3.1 Controllers/Instruction/Dimension
3.2 Refrigerant diagram
4. ELECTRICAL DATA
4.1 Wiring diagram
4.2 Circuit diagram
4.3 Resistance-Temperature character
5. NOISE LEVEL CHART
6. ELECTRICAL CONTROL FUNCTIONS
6.1 Indoor unit No. setting method
6.2 Flow chart for operation
6.3 Defrost operation flow chart
7. DIAGNOSTIC INFORMATION (TROUBLE SHOOTING)
7.1 Fault codes
7.2 Troubleshooting
7.3 Example of repair
8. INSTALLATION INSTRUCTIONS
8.1 Piping dimensions chart
8.2 Y-shape manifold pipe
8.3 Piping length and drop between the units
8.4 Combination examples
8.5 Installation dimensions
8.6 The order of Installation Work
8.7 Attentive matters of safety
8.8 Special work and main points in installation
8.9 Test of airtight quality
8.10 Charging of refrigerant
8.11 Refrigerant
8.12 Electric wiring
8.13 Unit number setting in site
8.14 Checks after the installation
9. EXPLODED VIEWS & PART LISTS
NOTE:THE PARTS MARKED WITH*** ARE ADDED INFORMATION

1 DESCRIPTION OF PRODUCTS & FEATURES
lIndoor unit:
Model of indoor unit
AS09 2 FMAHA
1 2 34 5 6 7 8 9 10 1 Product symbol (A stands for air conditioner)
2 Product mode (S stands for split type air conditioner)
3 , 4 Product specification (09 stands for cooling/heating capacity is 9000BTU/h)
5 Applicable voltage (2 stands for 220-240V/50Hz)
6 Product series (F stands for free combination)
7 Appearance character (M stands for 28 large arc normal air inlet grille 1232084
back frame )
8 Product type (A stands for heat pump type, refrigerant is R22)
9 Design number (H stands for inverter heat pump air conditioner)
10 Climate type (A stands for T1 climate)
Model of indoor unit
AP18 2 FAAHA
1 2 3 4 5 6 7 8 9 10 1 Product symbol (A stands for air conditioner)
2 Product mode (P stands for packaged type air conditioner)
3 , 4 Product specification (18 stands for cooling/heating capacity is 18,000BTU)
5 Applicable voltage (2 stands for 220-240V/50Hz)
6 Product series (F stands for free combination)
7 Appearance character (A stands for appearance of inverter packaged type air
conditioner)
8 Product type (A stands for heat pump type, refrigerant is R22)
9 Design number (H stands for inverter heat pump air conditioner)
10 Climate type (A stands for T1 climate)
lOutdoor unit:
Model of outdoor unit
AU42 2 FIAHA
1 2 34 5 6 7 8 9 10 1 Product symbol (A stands for air conditioner)
2 Product mode (U stands for split type air conditioner outdoor unit)
3 , 4 Product specification (42 stands for cooling/heating capacity is 42,000BTU)
5 Applicable voltage (2 stands for 220-240V/50Hz)
6 Product series (F stands for free combination)
7 Appearance character (I stands for 5HP outdoor unit)
8 Product type (A stands for heat pump type, refrigerant is R22)
9 Design number (H stands for inverter heat pump air conditioner)
10 Climate type (A stands for T1 climate)
1. Nomenclature
Equivalent power of outdoor unit
Model of outdoor unit AU422FIAHA AU422FIAIA AU422FIBIA
Total amount of indoor units can be
connected with
Types of indoor units can be
connected with
Capacity range of indoor units
connected with each system of A,B
2. Combination of indoor and outdoor
5HP
6 sets 4 sets 3 sets
50%-130% of each system's capacity
3 sets
See Table Indoor units
4 sets

Equivalent power of outdoor unit
Model of outdoor unit
Total amount of indoor units can be
connected with
Types of indoor units can be
connected with
Capacity of indoor units can be
connected with
3HP
AU242FHAHA AU242FHBHA
3 sets 3 sets 3 sets
9000~27000BTU/h
2 sets1 sets
Seenextpage table Indoor units
3. Models of indoor and outdoor units
Outdoor units
Capacity
(BTU/h)
Connect capacity
(HP)
Appearance Model
Refrigerant
Cooling Heating Min Max
Max. indoor
units can be
connected
Single system
AU422FIAHA R22
1.03.0
AU422FIAIA R22
Two systems
(5HP) AU422FIBIA R407C
41000 48000
2.0 6.0
6
AU242FHAHA R22
(3HP)
AU242FHBHA R407C
24000 29000 1.03.03
AU482FIAHA R22 48000 56000
AU48NFIAHA R22 48000 56000
1.0 6.0 8

indoor units
cooling heating
AB092FCAHA R22 10000 12000
AB142FCAHA R22 14000 17000
AB092FCBHA R407C 9000 11000
AB142FCBHA R407C 14000 16000
AB182FCAHA R22 18000 21000
AB182FCBHA R407C 18000 21000
AC142FCBHA R407C 14000 16000
AC182FCBHA R407C 18000 21000
AC182FCAHA R22 18000 21000
AE072FCAKA R22 7000 9000
AE092FCAHA R22 9000 11000
AE092FCBHA R407C 9000 11000
AE182FCAHA R22 18000 21000
AE182FCBHA R407C 18000 21000
AE242FCAKA R22 24000 28000
AE092FCAKA R22 9000 11000
AE122FCAKA R22 12000 14000
AE142FCAKA R22 14000 16000
AE182FCAKA R22 18000 21000
AE212FCAKA R22 21000 24000
AE112FCBIA
R407C
11000 13600
AE182FCBIA
R407C
18000 20500
Four way cassette
Convertible
Ceiling
concealed(TES
indoor)
capacity(BTU/h)
Ceiling concealed
type appearance model refrigerant

AP182FAAHA R22 18000 21000
AP182FABHA R407C 18000 21000
AF092FCBHA R407C 9000 13000
AF122FCBHA R407C 12000 17000
AS062FMAHA R22 6000 8000
AS072FMAHA R22 7000 9000
AS092FMAHA R22 10000 13000
AS092FMBHA R407C 10000 13000
AS122FMAHA R22 12000 14000
AS122FBBHA R407C 12000 14000
AS182FTAHA R22 18000 21000
AS182FTBHA R407C 18000 21000
Console
Cabinet
Wall-mounted

4. Character of Products
1) The length of horizontal refrigerant pipe can reach 70m,the total pipe length can reach
100m, the height difference between indoors unit and outdoor unit can reach 30m, the
height difference between indoor units can reach 10m.
2) 1000m super far distance communication between indoor and outdoor units, convenient
control and easy to enlarge the scale of units assembly.
3) Indoor unit can be controlled separately.
4) Equipped with computer-checking interface, conveniently for service work.
5) Far distance sending of refrigerant, and distribute refrigerant intelligently and reasonably
according to the needs of each room, high efficient and energy saving.
6) Display of automatic test of trouble.
7) Healthy negative ion generation function can refresh the air and excite the oxygen,it is optional.
8) The ceiling concealed models move the indoor electronic expansion valve out to
MP3 (electronic expansion valve box), completely avoid the flow sound of EEV,
extremely lower noise, and realize super-silence running in deed.
9) The ceiling concealed models (except AE07\AE24) all have return air box, it will be
set back return air when out of factory.When installation, bottom plate 2 can be
removed and installed on the back, consequently, return air mode has been
transferred to down return air.
10)In order to remain the best running state of indoor unit, control the refrigerant flow
by MP3 (MP2), so as to realize energy saving for every unit and the most
comfortable operation.
11)The units except for convertible model are all wired controller and remote controller
models.If you want a wired control unit or a remote control unit, please inform us ahead of
schedule.
The unit with remote controller is matched with receive display.
The unit with wired controller equipped with wired controller,can make remote operation on
wired controller with remote controller such as YR-H39, but the remote controller is
additionally purchased.

10.00
10.50
11.00
11.50
12.00
12.50
13.00
13.50
14.00
182328333843
outdoor temp.
cooling capacity(kW)
0.00
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
9.00
10.00
11.00
12.00
13.00
14.00
15.00
16.00
17.00
-15-13-11-9-7-5-3-11357911131517
outdoor temp.
heating capacity(kW)
5. Cooling and heating capacity curves
(AU422FIAHA / AU422FIAIA / AU422FIBIA)

1) Calculation method
Calculation method of refrigerating capacity-Refrigerating capacity to be known = Refrigerating
capacity x (1) x (2) x (3) x (4) x (5) W
A
B
C
120
100
80
60
40
20
020 40 60 80 100 120 135
1.1
1.0
0.9
80 90 100 110 120
1.2
1.1
1.0
0.9
0.8
0.7
0.6
0.5
-15 -10 -5 0 5 10 15
1.2
1.1
1.0
0.9
0.8
15 20 24
120
100
80
60
40
20
020 40 60 80 100 120 135
A
B
C
(1) Capacity compensation value of indoor
air wet-bulb temperature condition
1.1
1.0
0.9
80 90 100 110 120
1.2
-5
1.1
1.0
0.9
0 5 10 15 20 25 30 35 40 43
Capacity compensation value of outdoor air dry-bulb
temperature condition
(3) Capacity modification value
under airflow variation rate of
indoor unit group (only for
airflow type unit)
indoor air wet-bulb temperature(*)outdoor air dry-bulb temperature(*)airflow variation rate
Capacity modification value
(4) Fall of refrigerant pipe of indoor and outdoor
unit, capacity compensation value of pipe length
1.2
1.1
1.0
0.9
0.815 20 24
(5) Capacity compensation suitable
for total capability of indoor unit
group (cooling)
Outdoor unit
Indoor unit group
capacity modification value
lo
he
la
lb
lc
ha
hchb
ho
standard capacity
L(m) Length of refrigerant
pipe (corresponding length)
L (m)
Total capacity of indoor unit group
2) Calculation method of heating capacity—Heating capacity to be known = Heating capacity ((1) x (2) x (3) x (4) x (5) x (6)) W
(1) Capacity modification under indoor
air wet-bulb temperature condition
(2) Capacity modification under outdoor air wet-bulb temperature condition
(3) Capacity modification
value under airflow variation
rate of indoor unit group
indoor air dry-bulb temperature(*)
outdoor air wet-bulb temperature(*)
(4) Fall of refrigerant pipe of indoor and outdoor unit,
capacity compensation value of pipe length (5) Capacity compensation suitable
for total capability of indoor unit
group (heating)
Length of refrigerant pipe (corresponding length) L (m)
Outdoor unit
Indoor unit group
capacity modification value
H=ho+(the max. value of ha, hb, hc)
L=lo+(the max. value of la, lb, lc)
Total capacity of indoor unit group
standard capacity
lo
ho
he
ha
lb
le
hc
hb
10 20 30 40 50 60 70 80 90 100 110 120
25
100%
99 98
97
99
98
97 96 95 94 93 92 91 90 89 88 87 86
50
40
30
20
10
0
-30
-40
-50
-20
-10
10 20 30 40 50 60 70 80 90 100 110 120
25
100%
99 98
97
99
98
97 96 95 94 93 92 91 90 89 88 87 86
50
40
30
20
10
0
-30
-40
-50
-20
-10
AU48- Characteristics of refrigerating and heating capacity

(AU242FHAHA / AU242FHBHA)
0.00
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
9.00
10.00
11.00
-15-13-11-9-7-5-3-11357911131517
outdoor temp.
heating capacity( kW)
0.00
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
9.00
10.00
182328333843
outdoor temp.
cooling capacity(kW)

2 SPECIFICATIONS
AU422FIAHA AU422FIAIA
Btu/h 41000 41000
Btu/h 48000 48000
*1PH 220-230V 50Hz *1PH 220-230V 50Hz (×2)
30~120Hz 30~120Hz
Cooling power W 5000(7100max) 5000(7100max)
Running current A 24(36max) 24(36max)
Heating power W 5000(7100max) 5000(7100max)
Running current A 24(36max) 24(36max)
Noise level dB(A)
59/-/ 1m long 1m distance distance
59/-/-
External mm
1250×1035×340 1250×1035×340
Package mm 1375×1050×440 1375×1050×440
Weight Net/Gross Kg
91/111
91/111
HV341A2-S12L HV341A2-S12L
Direct start Direct start
R22 R22
Charge g 1600×2 1600×2
Reverse cycle Reverse cycle
Fan Screw fan x 2 Screw fan x 2
Power output W 60×2 60×2
Soft inverter Soft inverter
m3/h 6480 6480
Rubber bracket
(compressor use)
Rubber bracket
(compressor use)
Indoor unit side Indoor unit side
Electronic thermosta Electronic thermosta
Liquid mm 9.52 9.52
Gas mm 15.88 15.88
*Piping length m 50(max) 50(max)
*Drop between I.U. and O.U. m30(max) 30(max)
*Drop between I.U. and I.U. m
10(max)
10(max)
Flared Flared
* The AU422FIAHA has one power source terminal block.
Item Model
Cooling capacity
Heating capacity
Power source
Working frequency scope
Running data
Dimension
L×W×H
Compressor Model
Starting method
Heat exchanger Combination of wave cranny radiation fin and copper pipe
Refrigerant control method Capillary + electronic expansion valve (PMV)
Refrigerant Type
Defrost method
Type×Number
Fan motor Starting method
Air-flow
Anti-vibration and sound insulation devices
Control mode (remote/wired)
Indoor temperature control
Safety devices
* The indoor unit (I.U.) and the outdoor unit (O.U.) are in the same system.
* The AU422FIAIA has two power source terminal blocks. The power source can be 2×(220V, 1ph, 50Hz), or it can
be two phases of (380V, 3N, 50Hz).
Compressor internal equipped protector /Fan motor internal
equipped thermostat /Compressor internal equipped reductor
Piping
Connecting method
Accessories Parts need in installation, controller
1). 5HP outdoor unit (R22)
* The two indoor units (I.U.) are in the same system.

Btu/h
Btu/h
Cooling power W
Running current A
Heating power W
Running current A
Noise level dB(A)
External mm
Package mm
Weight Net/Gross Kg
Charge g
Fan
Power output W
m3/h
Liquid mm
Gas mm
*Piping length m
*Drop between I.U. and O.U. m
*Drop between I.U. and I.U. m10(max)
Flared
Indoor unit side
Electronic thermosta
9.52
15.88
60×2
Soft inverter
6480
Rubber bracket (compressor use)
R407C
2000×2
Reverse cycle
Screw fan x 2
91/111
BG240X2CS-20KU
Direct start
41000
48000
*1PH 220-230V 50Hz (×2)
26(36max)
59/-/-
1250×1035×340
1375×1050×440
30~120Hz
5200(7100max)
27(36max)
5100(7100max)
AU422FIBIA
Combination of wave cranny radiation fin and copper pipe
Capillary + electronic expansion valve(PMV)
Compressor internal equipped protector /Fan motor internal
equipped thermostat /Compressor internal equipped reductor
Safety devices
Air-flow
Control mode (remote/wired)
Indoor temperature control
Anti-vibration and sound insulation devices
Heat exchanger
Refrigerant control method
Item Model
Cooling capacity
Fan motor Starting method
Compressor
Heating capacity
Defrost method
Type×Number
Refrigerant
Running data
* The indoor unit (I.U.) and the outdoor unit (O.U.) are in the same system.
Piping
Connecting method
Accessories
* The AU422FIBIA has two power source terminal blocks. The power source can be 2×(220V, 1ph, 50Hz), or it can
be two phases of (380V, 3N, 50Hz).
Parts need in installation, controller
50(max)
30(max)
Type
Power source
Working frequency scope
Model
Starting method
Dimension
L×W×H
2). 5HP outdoor unit (R407C)
* The two indoor units (I.U.) are in the same system.

AU242FHAHA AU242FHBHA
Btu/h 24000 24000
Btu/h 28000 27000
1PH 220-230V 50Hz 1PH 220-230V 50Hz
30~120Hz 30~120Hz
Cooling power W 3100(3700max) 3200(3800max)
Running current A 15.5(18max) 18(21max)
Heating power W 3100(3700max) 3100(3800max)
Running current A 15.5(18max) 17(21max)
Noise level dB(A) 58/-/- 58/-/-
External mm 948×340×830 948×340×830
Package mm 1075×445×965 1075×445×965
Weight Net/Gross Kg 74/89 74/89
THV247FBE C-7RB267H03AA
Direct start Direct start
R22 R407C
Charge g 2200 3200
Fan Screw fan×1 Screw fan×1
Power output W 60 60
Soft inverter Soft inverter
m3/h 3240 3240
Rubber bracket
(compressor uses)
Rubber bracket
(compressor uses)
Indoor unit side Indoor unit side
Electronic thermosta Electronic thermosta
Liquid mm 9.52 9.52
Gas mm 15.88 15.88
Piping length m 50m(max) 50m(max)
Drop between I.U. and O.U. m 30m(max) 30m(max)
Drop between I.U. and I.U. m 10m(max) 10m(max)
Flared Flared
Parts need in installation, controller
Combination of wave cranny radiation fin and copper pipe
Capillary + electronic expansion valve
Microcomputer temperature difference type anti-icing reverse cycle
mode defrosting
Compressor internal equipped protector Fan motor internal
equipped thermostat Compressor internal equipped reductor valve
Running data
Item Model
Cooling capacity
Heating capacity
Power source
Working frequency scope
Dimension
L×W×H
Compressor Model
Starting method
Heat exchanger
Refrigerant control method
Refrigerant
Fan motor
Type
Defrost method
Type×Number
Starting method
Air-flow
Anti-vibration and sound insulation devices
Piping
Control mode (remote/wired)
Indoor temperature control
Safety devices
Connecting method
Accessories
3). 3HP outdoor unit (R22 & R407C)

Function Coolin
g
Heatin
g
Capacity BTU/h 48000 56000
W6000 6000
W7200W 7000W
Dehumidifying capacity 10‐³×m³/h
Power source N，V，H
z
A / A
Unit model (color)
Fan Type × Number
Speed(H-M-L) r/min
Fan motor output power kW
Air-flow(H-M-L) m³/h
Heat exchanger Type / Diameter mm
Total Area m²
Temp. scope ℃
External （L×W×H）mm×mm×mm
Package （L×W×H）mm×mm×mm
Drainage pipe (material , I.D./O.D.) mm
Control type (Remote /wired)
Fresh air hole dimension mm
kW
dB(A)
kg / kg
External （L×W×H）mm×mm×mm
Package （L×W×H）mm×mm×mm
kg / kg
Unit model (color)
Compressor Model / Manufacture
Type
Fan Type × Number
Speed r/min
Fan motor output power kW
Air-flow(H-M-L) m³/h
Heat exchanger Type / Diameter mm
Total area m²
Temp. scope ℃
External （L×W×H）mm×mm×mm
Package （L×W×H）mm×mm×mm
Drainage pipe (material , I.D./O.D.) mm
Refrigerant control method mm/mm
Volume of Accumulator L
Noise level dB(A)
material of reduce noise
crankcase heater power W
k
g
/ k
g
Refri
g
erant T
y
pe / Char
g
e
g
Rechar
g
e quantit
y
g
/m
Liquid mm
Gas mm
Connecting Method
m
m
PIPING
R22
6500
/
Pipe
9
.
5
2
1
9
.
05
flared
Between I.D &O MAX.Drop 30
Rubber bracke
t
/
Weight (Net / Shipping) 12
5/
14
5
MAX.Pi
p
in
g
l
e
n
gt
h
50
/
60/-/-
Type of Four way valve
/
/
ca
p
illar
y
+electrionic ex
p
ansion valv
e
Defrosting
A
uto
/
Dimension 1250×1035×34
0
1375×1050×44
0
Outdoor unit
WHIT
E
EHV46FAL1/MITSUBISHI
scroll
A
xial-flowX2
840
6500
/
/
Panel
Dimension
/
/
Weight (Net / Shipping)
/
Noise level (H-M-L) /
Weight (Net / Shipping) /
/
/
/
Electricity Heater /
/
/
Dimension /
/
1N 220V 50H
Z
Running current(max. runni
n
current
)
cooling ：10/13 heating ：10/12
Indoor unit
/
/
/
/
/
/
Item model
A
U482FIAHA
Total power input
/
Max. power input

Function Coolin
g
Heatin
g
Capacity BTU/h 48000 56000
W6000 6000
W7200W 7000W
Dehumidifying capacity 10‐³×m³/h
Power source N，V，H
z
A / A
Unit model (color)
Fan Type × Number
Speed(H-M-L) r/min
Fan motor output power kW
Air-flow(H-M-L) m³/h
Heat exchanger Type / Diameter mm
Total Area m²
Temp. scope ℃
External （L×W×H）mm×mm×mm
Package （L×W×H）mm×mm×mm
Drainage pipe (material , I.D./O.D.) mm
Control type (Remote /wired)
Fresh air hole dimension mm
kW
dB(A)
kg / kg
External （L×W×H）mm×mm×mm
Package （L×W×H）mm×mm×mm
kg / kg
Unit model (color)
Compressor Model / Manufacture
Type
Fan Type × Number
Speed r/min
Fan motor output power kW
Air-flow(H-M-L) m³/h
Heat exchanger Type / Diameter mm
Total area m²
Temp. scope ℃
External （L×W×H）mm×mm×mm
Package （L×W×H）mm×mm×mm
Drainage pipe (material , I.D./O.D.) mm
Refrigerant control method mm/mm
Volume of Accumulator L
Noise level dB(A)
material of reduce noise
crankcase heater power W
k
g
/ k
g
Refri
g
erant T
y
pe / Char
g
e
g
Rechar
g
e quantit
y
g
/m
Liquid mm
Gas mm
Connecting Method
m
mMAX.Pi
p
in
g
l
e
n
gt
h
50
PIPING
R22
6500
/
Pipe
9
.
5
2
1
9
.
05
flared
Between I.D &O MAX.Drop 30
Rubber bracket
(
com
p
ressor use
)
/
Weight (Net / Shipping) 12
5/
14
5
/
60/-/-
Type of Four way valve
/
/
ca
p
illar
y
+electrionic ex
p
ansion valv
e
Defrosting
A
uto
/
/
/
Dimension 1250×1035×34
0
1375×1050×44
0
Indoor unit
/
Outdoor unit
WHIT
E
JT100BHVYE/DAIKI
N
scroll
A
xial-flowX2
840
6500
Panel
Dimension
/
/
Weight (Net / Shipping)
/
Noise level (H-M-L) /
Weight (Net / Shipping) /
/
/
/
Electricity Heater /
/
/
/
/
/
/
/
Dimension /
/
/
3N 380V 50H
Z
Running current(max. runni
n
current
)
cooling ：10/13 heating ：10/12
Item model
A
U48NFIAHA
Total power input
Max. power input

AB092FCBHA AB142FCBHA
Btu/h 9000 14000
Btu/h 12000 16000
1PH 220-230V 50Hz 1PH 220-230V 50Hz
dB(A) 41/39/35 41/39/35
L/h 1.6 2.1
R407C R407C
External mm 570×570×276 570×570×276
Package mm 715×715×361 715×715×361
Net Kg/Kg 25/4.2 26/4.2
Gross Kg/Kg 27/6.3 28/6.3
Fan Cross flow fan x 1 Cross flow fan x 1
Power output W 15×1 15×1
Relay control Relay control
m3/h 700 700
Liquid mm 6.35 6.35
Gas mm 9.52 12.7
Flared Flared
m213~19 17~27
wireless remote control wireless remote control
AB182FCAHA AB182FCBHA
Btu/h 18000 18000
Btu/h 21000 20000
1PH 220-230V 50Hz 1PH 220-230V 50Hz
dB(A) 43/42/39 41/39/35
L/h 2.1 2.1
R22 R407C
External mm 750×750×320 570×570×276
Package mm 900×900×460 715×715×361
Net Kg/Kg 29/3.5 26/4.2
Gross Kg/Kg
39/5.8 28/6.3
Fan Cross flow fan x 1 Cross flow fan x 1
Power output W 20×1 20×1
Relay control Relay control
m3/h 1000 700
Liquid mm 9.52 9.52
Gas mm 15.88 15.88
Flared Flared
m2
22~33 25~35
wireless remote control wireless remote control
Suited area
Controller type
Connecting method
Item Model
Suited area
Controller type
Refrigerant control method
Type×Number
Starting method
Air-flow
Heating capacity
Power source
Refrigerant
Heat exchanger
Type×Number
Heat exchanger
Refrigerant control method
Refrigerant
Item Model
Cooling capacity
Heating capacity
Power source
Noise level H/M/L
Noise level H/M/L
Dehumidifying capacity
Weight
Unit/Panel
Air-flow
Connecting method
Starting method
Combination of wave cranny radiation fin and copper pipe
Fan motor
Capillary + Electronic expansion valve
Dimension
L×W×H
Dehumidifying capacity
Piping
Weight
Unit/Panel
Cooling capacity
Piping
Combination of wave cranny radiation fin and copper pipe
Capillary + Electronic expansion valve
Fan motor
Dimension
L×W×H
4). Cassette type indoor unit

AE072FCAKA AE092FCAKA
Cooling capacity Btu／h7000 9000
Heating capacity Btu／h9000 11000
Cooling capacity W 1800 2500
Heating capacity W 2400 3000
Dehumidifying capacity 10‐³×m³/h 1.2 1.6
Power source N，V，Hz 1PH 220V-230V 50HZ 1PH 220V-230V 50HZ
Refrigerant R22 R22
Noise level(H/M/L) dB(A) 36/-/- 36/-/-
Type × Number centrifugal fan×2 centrifugal fan×2
Air-flow(H-M-L) m³/h 420 520
starting mothod Relay control Relay control
Heat exchanger
Combination of wave
cranny radiation fin
and copper pipe
Combination of wave
cranny radiation fin
and copper pipe
Refrigerant control method Capillary + Electronic
ex
p
ansion valve
Capillary + Electronic
ex
p
ansion valve
External mm×mm×mm 663×440×225 650×450×225
Net kg / kg 11.6 18
Liquid mm 6.35 6.35
Gas mm 9.52 9.52
Connection method flared flared
Suited area m2 8~16 11~21
Controller type wired controller or
remote controller
wired controller or
remote controller
AE122FCAKA AE182FCAKA
Cooling capacity Btu／h12000 18000
Heating capacity Btu／h14000 21000
Cooling capacity W 3200 5000
Heating capacity W 4000 6000
Dehumidifying capacity 10‐³×m³/h 1.8 2.4
Power source N，V，Hz 1PH 220V-230V 50HZ 1PH 220V-230V 50HZ
Refrigerant R22 R22
Noise level(H/M/L) dB(A) 38/38/40 40/42/44
Type × Number centrifugal fan×2 centrifugal fan×2
Air-flow(H-M-L) m³/h 650 1000
starting mothod Relay control Relay control
Heat exchanger
Combination of wave
cranny radiation fin
and copper pipe
Combination of wave
cranny radiation fin
and copper pipe
Refrigerant control method Capillary + Electronic
expansion valve
Capillary + Electronic
expansion valve
External mm×mm×mm 804×450×225 1288×225×400
Net kg / kg 20 25
Liquid mm 6.35 9.52
Gas mm 12.7 15.88
Connection method flared flared
Suited area m2 12~23 23~36
Controller type wired controller or
remote controller
wired controller or
remote controller
Item model
Fan
Dimension （L×W×H）
Weight(unit/panel)
Weight(unit/panel)
Piping
Piping
Item model
Fan
Dimension （L×W×H）

AB092FCAHA AB142FCAHA
Cooling capacity Btu／h10000 14000
Heating capacity Btu／h12000 17000
Cooling capacity W 3200 4000
Heating capacity W 4000 5000
Dehumidifying capacity 10‐³×m³/h 1.8 1.8
Power source N，V，Hz 1PH 220V-230V 50HZ 1PH 220V-230V 50HZ
Refrigerant R22 R22
Noise level(H/M/L) dB(A) 35/39/41 35/39/41
Type × Number centrifugal fan×1 centrifugal fan×1
Air-flow(H-M-L) m³/h 700 700
starting mothod Relay control Relay control
Heat exchanger Combination of wave
cranny radiation fin and
Combination of wave
cranny radiation fin and
Refrigerant control method Capillary + Electronic
expansion valve
Capillary + Electronic
expansion valve
External mm×mm×mm 700×570×276 700×570×276
Net kg / kg 26/4.2 26/4.2
Liquid mm 9.52 9.52
Gas mm 15.88 15.88
Connection method flared flared
Suited area m2 12~23 17~27
Controller type wired controller or remote
controller
wired controller or remote
controller
AE212FCAKA AE242FCAKA
Cooling capacity Btu／h21000 24000
Heating capacity Btu／h24000 28000
Cooling capacity W 6000 7100
Heating capacity W 7000 8000
Dehumidifying capacity 10‐³×m³/h 2.4 3
Power source N，V，Hz 1PH 220V-230V 50HZ 1PH 220V-230V 50HZ
Refrigerant R22 R22
Noise level(H/M/L) dB(A) 40/42/44 38/42/46
Type × Number centrifugal fan×2 centrifugal fan×3
Air-flow(H-M-L) m³/h 1000 900~1500
starting mothod Relay control Relay control
Heat exchanger Combination of wave
cranny radiation fin and
Combination of wave
cranny radiation fin and
Refrigerant control method Capillary + Electronic
expansion valve
Capillary + Electronic
expansion valve
External mm×mm×mm 1024×450×225 1380×450×225
Net kg / kg 25 42
Liquid mm 9.52 9.52
Gas mm 15.88 15.88
Connection method flared flared
Suited area m2 27~41 32~49
Controller type wired controller or remote
controller
wired controller or remote
controller
Weight(unit/panel)
Piping
Piping
Item model
Fan
Dimension（L×W×H）
Item model
Fan
Dimension（L×W×H）
Weight(unit/panel)

Btu/h
Btu/h
dB(A)
L/h
External mm
Package mm
Net Kg
Gross Kg
Fan
Power output W
m3/h
Liquid mm
Gas mm
m2
AC182FCAHA AC182FCBHA
Btu/h 18000 18000
Btu/h 21000 21000
1PH 220-230V 50Hz 1PH 220-230V 50Hz
dB(A) 48/44/38 48/44/38
L/h 2.1 2.1
R22 R407C
External mm 990×655×199 990×655×199
Package mm 1160×760×310 1160×760×310
Net Kg 30 30
Gross Kg 39 39
Fan Centrifugal fan x 1 Centrifugal fan x 1
Power output W 70×1 70×1
Relay control Relay control
m3/h 860 860
Liquid mm 9.52 9.52
Gas mm 15.88 15.88
Flared Flared
m222~33 22~33
wireless remote control wireless remote control
Suited area
Controller type
16~23
wireless remote control
Type×Number
Starting method
Air-flow
Piping
Connecting method
Power source
Refrigerant
Heat exchanger
Refrigerant control method
Controller type
Item Model
Cooling capacity
Heating capacity
Refrigerant
Heat exchanger
Refrigerant control method
Type×Number
Item Model
Cooling capacity
Heating capacity
Power source
30
39
48/44/38
2.1
990×655×199
1160×760×310
AC142FCBHA
14000
16000
1PH 220-230V 50Hz
Fan motor
Centrifugal fan x 1
70×1
Relay control
860
9.52
15.88
Flared
Dehumidifying capacity
Capillary + Electronic expansion valve (PMV)
Capillary + Electronic expansion valve (PMV)
Dimension
L×W×H
Weight
Starting method
Noise level H/M/L
Fan motor
Air-flow
Piping
Connecting method
Suited area
R407C
Noise level H/M/L
Dehumidifying capacity
Dimension
L×W×H
Weight
Combination of wave cranny radiation fin and copper pipe
Combination of wave cranny radiation fin and copper pipe
5). Convertible type indoor unit

AD142FCBHA AD182FCBHA
Btu/h 14000 18000
Btu/h 16000 21000
1PH 220-230V 50Hz 1PH 220-230V 50Hz
dB(A) 43/41/38 43/41/38
L/h 1.2 1.2
R407C R407C
External mm 990×650×300 990×650×300
Package mm 1137×800×320 1137×800×320
Net Kg 38 38
Gross Kg 55 55
Fan Centrifugal fan × 2 Centrifugal fan × 2
Power output W 50×2 50×2
Relay control Relay control
m3/h 850 780/710/630
Liquid mm9.52 9.52
Gas mm 15.88 15.88
Flared Flared
m224~38 24~38
wired remote control wired remote control
AP182FAAHA AP182FABHA
Btu/h 17000 18000
Btu/h 21000 21000
1PH 220-230V 50Hz 1PH 220-230V 50Hz
dB(A) 48/45/39 48/45/39
L/h 2.6 2.6
R22 R407C
External mm 1746×500×250 1746×500×250
Package mm 1862×610×405 1862×610×405
Net Kg 36 36
Gross Kg 49 49
Fan Centrifugal fan × 1 Centrifugal fan × 1
Power output W 70×1 70×1
Relay control Relay control
m3/h 900 800
Liquid mm 9.52 9.52
Gas mm 15.88 15.88
Flared Flared
m223~36 23~36
wireless remote control wireless remote control
Suited area
Controller type
Type×Number
Starting method
Air-flow
Piping
Connecting method
Fan motor
Capillary + Electronic expansion valve
Heat exchanger
Refrigerant control method
Power source
Noise level H/M/L
Dehumidifying capacity
Refrigerant
Dimension
L×W×H
Heat exchanger
Refrigerant control method
Dimension
L×W×H
Weight
Refrigerant
Capillary + Electronic expansion valve
Fan motor
Dehumidifying capacity
Type×Number
Controller type
Starting method
Item Model
Cooling capacity
Air-flow
Item Model
Cooling capacity
Heating capacity
Noise level H/M/L
Heating capacity
Power source
Weight
Piping
Connecting method
Suited area
Combination of wave cranny radiation fin and copper pipe
Combination of wave cranny radiation fin and copper pipe
6). Med static pressure duct type indoor unit
7). Cabinet type indoor unit