Haier LE32B7000 User manual

Heier
TV LCD LED
OWNER S MANUAL
MODEL: LE32B7000
LE40B7000
Please READ this manual carefully
before operating your TV, and retain
it for future reference

Contents
I, Safety and warnings 2-3
2, Introduction 4
3, Installation 5-9
4, Remote Controller. 10
5, TV Operation 11-14
6, Trouble shooting 15
-1-

S4FErr4NP WARNINGS
IMPORTANT SAFETY INSTRUCTION
I) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings, install
in accordance with the instructions.
8) Do not install near any heat sources such as
radiations, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized plug. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the ohsolete outlet.
10) Protected the power cord from being walked
on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
II) Only use attachments/accessories specified
by the manufacturer.
12) Unplug this apparatus during lighting
storms or when unused for long periods of time.
13) Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has heen damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
14) Mains plug is used as the disconnect device,
the disconnect device shall remain readily
operable.
15) The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloth, curtains, etc.
16) No naked flame sources, such as lighted
candles, should be placed on the apparatus.
17) Attention should be drawn to the
environmental aspects of battery disposal.
18) The use of apparatus in moderate climate.
19) The apparatus shall not be exposed to
dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on
the apparatus.
CAUTtON
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER (OR BACK).NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
At. The symbol indicates that dangerous
a voltages constituting a risk of electric shock
are present within this unit.
AThe symbol indicates that there are
important operating and maintenance
instructions in the literaturaccompanying this
unit.
WAR ING:
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
WARNING:
The batteries shall not be exposed to
excessive heat such as sunshine, fire or the
like.
This symbol indicates that this product
incorporates double insulation between
hazardous mains voltage and user accessible
parts. When servicing use only
identical replacement parts.
-
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible harm to
the environment or human health from
uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device,
please use the return and collection systems or
contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
-2-

SdFETf ND WARNINGS
High voltages are used in the operation of this television
...receiver. Do not remove the cabinet back from your set.
Refer servicing to qualified service personnel.
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Do not trap the power supply cord under the television
receiver.
Never stand on, lean on, or suddenly push tbe television or
its stand. You should pay special attention to children .
Serious injury may result if it falls.
Do not place your television on an unstable cart, stand,
shelf or table. Serious injury to an individual, and damage
to the television, may result ifit falls.
When tbe television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.r- ----,
I f the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.
-3-

[NTRODUCTION
Main features Accessories
CD Used as Television, display terminal, PC display;
®High luminance, wide viewing angle;
@ Can store 199 TV programs;
@ HDMI interface;
Infrared Remote Controller
Bartery(AAA)
User's Manual
Quick Set up Guide
@ Multi-Media player (USB);
Main parameter
Viewing Picture Size (Diagonal) 81 em IOOcm
Resolution 1366x768 1920x1080
Aspect Ratio 16: 9 16: 9
TV System PAUBG PAUBG
Video Signal System PALINTSC/SECAM PALINTSC/SECAM
Receiving Channel 1-199 1-199
Input Power Voltage AC 100-240V 50/60Hz AC I00-240V 50/60Hz
Power consumption 60W 74W
Audio Output Power (THD$7%) 2x8W 2x8W
Signal input/output Analog RGB(VGA) x 1
High-Definition Multimedia Interface (HDMI) x 2
Composite Video Input x I
Headphone Output x I
YCb (Pb )Cr (P r) x I
USB x 2
RF x I
Horizontal definitio n (TV line ) Composite Video input >=350
Y Cb(Pb ) C r(Pr) >=400

Stand Assemble Instruction
INST1LLAPON
Place the TV with the display side
down on a flat surface. Use a cloth
to protect the display.
Attach the stand base plate to the
stand pole by firmly tightening the
supplied 4pcs silver screws.
r r
4 ~
~
Attach the stand base set to the bottom
of the TV by firmly tightening the
supplied 4pcs black screws.
INSTALLATION NOTES
Locate the TV in a room where light does not strike the screen directly. Total darkness or a reflection
on the screen can cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.
Allow enough space between the TV and the wall to permit ventilation.
Please do not attempt to rotate the TVon the stand.
Avoid excessively warm locations to prevent possible damage to the cabinet or premature component
failure.
WallMounting Installation Guidelines
Use the four screws to fix the TV onto a wall mounting bracket (not included) via the four VESA standard
holes on the back of the television.
(LE32B7000)
M6
M6
(LE40B7000)
·5·

lNSTA
LL4
PON
Front panel KEYBOARD
1: Remote control sensor.
2: Indicator LED: RED. STANDBY.
3: Keyboard
REARAV Connections
SDURCE- <D
MENU -@
VOL~®
VOl-
CH+ J-®
CH·
POWER-@
1. SOURCE,
Display the input source menu.
2. MENU,
Display main MENU.
3. VOL+NOL-
Adjust sound level.
In MENU mode. press "VOL+" or "VOL-" to
adjust the item that you selected.
4. CH+/CH-
In TV mode. press "CH+" or "CH-" to change
the channel up and down.
In MENU mode, press "CH+" or itCH·" to select
items.
5. POWER
Press this button to turn the unit ON from
STANDBY mode.
Press it again to turn the set back to STANDBY.
@®® ®®® 0 c=':l 0
HEADPHONE L R VIDEO Y Pb p, peAUDIO VGA RF
All the terminals are(from left to right):
HEADPHONE, AUDIO INPUT, VIDEO, YPbPr, PC AUDIO, VGA, RF.
REAR AV Connections(SIDE)
o0 0 0
HlHI • " ",,6' USB
All the terminals are (from left to right):
HDMII, HDMI2, USBI, USB2,
ote: When HDMI port get DVI signal, the audio signal receives from the PC
Audio channel.
-6-

INSTALL4WN
TE N
>
---
H.~
An outdoor antenNI
TWlN-LEAD FEEDER(3000)
L.oosenthesaews Insertthefeede(in ••••••• Tightenthesaews
Note:
Aerial connections: RF.
Input impendance: 750unbalanced.
Please don't rotate the TV.
PC
STEPS:
Be sure both the TV and computer are Power ofT.
I.Connect VGA and audio cable
2.Connect power cord
3.Power on the TV, switch to PC mode
4.Power on the PC
This sequence is very important.
-7-

INSTALLApoN
PRESET MODE (PC)
V.FI'ftj.(Hz) H.Freq.(Uz)
RESOLllTlON
800'600 60
37.88
1024·768 60 48.36
60 47.7
Only LE40B7000 supports to 1920'1080.
NOTE: PC VFreq.(Hz) not more than 60Hz.
PRESET MODE (HDMI)
RESOLUTION
V.Frtq.{H~) H.Fr"l.(Hz)
800'600 60 37.88
1024°768 48.36
1360·,68 47.7
1920·1080 67.S
f
-8-

INSTA
LL4
TION
AVEQUIPMENT
This TV provides one group of AV ,one group of YPbPr for convenient connection to VCR, DVD
or other video equipment. Please refer to the owner's manual of the equipment to be connected
as well.
You can use the input terminals on TV set rear as follows.
CJ CJ 0 0
I I f1 Hcn '~11 '''Ii.-
VIDEO EQUIPMENT wfth YPbPr
®Red (audio R)
@Whlte(audlo L)
®Red(Pr or Cr)
@ Blue(Pb or Cb)
@Green(Y)
®
@) @@@@@O~0
HEADPHONE L R VIDEO Y Pt) Pr PC AUDIO VGA ar
It can be connected to the following appliances: VCR, multi disc player, DVD, camcorder,
video game or stereo system, etc.....
YPbPr can support these video formats:48Di,576i,48Dp,576p, 72Dp,1 D8Di, 1D8DP.
Note:
1.VIDEO and YPbPr share one audio channel.
2.When HDMI port get DVI signal, the "PC Audio" channel is changed to receive the
audio for HDMI port.
3.Sometimes it will not support in different device because the device supplys
nonstandard signal.
-9-

Using Your Remote Control
REMqTE CllNTRqLL§R
#
Button Descriptions
1
( ) (Power) Pressto turn the
TV on or off.
2S.MODE Pressto select the sound mode.
3 P.MODE Pressto select the picture mode.
0-9 Pressto enter a channel number
or password.
4Q.vIEW Pressto switch to the last viewed
channel.
FREE2E Pressto freeze the picture.
S
.Ll +l-
Pressto adjust the volume level.
« (Mute) Pressto turn the sound on or off.
6These models do not support 3D
3D feature.
Press to open a favorite channel list.
7FAVI~ In teletext mode, pressto hold a
page.
aMENU/@]) Pressto open the on-screen
menu.ln teletext mode,press to
open the INDEXpage.
9
CCI~
Pressto open the teletext.
10 PAGE+ Pressto go to the next page in
teletext mode and multimedia mode.
A"'<II~
Pressto navigate the on-screen
"
menu.
OK Pressto confirm a selection.
12 PAGE- Pressto go to the previous page
inteletextmodeandmultimediamode.
13
+I (reverse) Pressto fast forward or reverse
* (forward) playback in multimedia mode.
14 ~I(play/ Pressto play/pause in multimedia
pause) mode.
1S P.SIZE Pressto change the screen
display mode.
16 SLEEP Pressto set the sleep timer.
17 SOURCE Pressto open the input source
list.
1a
Q-
Pressto open the home menu of
the MHL device.
19 CH~/""" Pressto change the channel.
Pressto open the channel list.
20 CH.LlST/1±I In teletext mode, press to switch
the image to top, bottom orfull.
21 IIII/MTS/ Pressto select the audio mode
SAP (depending on broadcast signal).
Pressto display the channel
information.
22 INFO/rn In teletext mode, press to reveal
the hidden information.
In multimedia mode, press to
23 BACKI~ return to the previous screen.
In teletext mode, press to enter
mix mode.
Pressto close the on-screen
EXIT/18I menu.
24 In teletext mode, press to hide
the text.
25 _(stop) Pressto stop multimedia
playback.
26
Gl/¥
In teletext mode, press to enter a
secondary page.
Pressto open the APPmenu of
the MHLdevice.
27 H.LOCK Pressto open the Hotel mode
menu.
ote: The relevant button doesn't work if TV without teletext, NlCAM, MHL fUDCtiOD.
-10-

TVQPER4Uw
J. CHANNEL MENU
The first item of the MENU is channel menu ( for
TV source only).
You can search channels and edit programs here.
Press .•.•. to move, press OK button to confirm,
and press < • to adjust.
I).Auto tuning:
Search all the TV channels automatically.
2). ATV Manual tuning:
You can search the TV channels and fine tune the
channels, then storage the channels you selected.
AfV Manual l u n m q
a Curront CH 1 D
Color System PAL
Sound Systern BG
Fine-Tune 121.25 MHL
AFC On
Search
to) Menu
3). Program Edit:
You can Delete, Rename, Move, or Skip any programs.
Programme Edit
.. Delete • Rename • Move •. Skip
El3I Ent.r e Fay \ Menu
• Delete
Press .•.•. to choose the program.
Press red button, the program will delete.
• Rename
Move the cursor to the program, press
green button to rename the program.
Press ..•.•. to choose the character. Press -<4 It- to
move the cursor.
Press MENU button to exit edit, Press EXIT to exit
the menu.
Note: The TV programs name only can be 5 characters.
e Move
Move the cursor to the program, press
yellow button, it will show yellow cursor, Press .••
to move the program.
• Skip
Press T •. to choose the program, press
blue button to skip this program, The icon @will
show on the right side of the program.
Choose the skipped program, press the blue button
again, you can cancel the skip, Then the icon @ will
disappear.
8 Fav
Press ~ ~ to choose the program, press FAV button, it will
show. on the right side of the program. Choose the FAV
program, press FAY button again, you can cancel the FAY,
the. will disappear.
Once your favorite group is created, you can press the FAY
key to quickly access your favorite channel.
2. PICTURE MENU
The second item of the MENU is PICTURE MENU.
You can adjust picture effect here, such as contrast,
brightness, etc.
Press v a to move, press OK button to confirm,
and press < • to adjust.
NOTE:
I ).Tint is available in NTSC system only.
2). There are three color temperature modes
can be selected, such as Medium/Warm/Cool.
·11-

3. SOUND MENU
The third item of the MENU is the SOUND
MENU.
You can adjust tbe sound effect here such as
treble, bass, balance etc.
Press .••."" to move, press OK button to confirm,
and press'" ~ to adjust.
••
$t.nd.rd
••
I,tbl,
Beu
t;J ,O ...'Nl'
AUdIO Ol'lly
~;
IIMI
,
."
( fllot<
Muv.
n
M"'I
Dl:flhr
"
lJll
Note:
Auto volume: only available wben the input
signal volume is too large or distortion.
4. TIME MENU
The forth item of the menu is tbe TIME MENU
You can adjust the clock, power on/off time,
sleep time etc.
Press .••.""to move, press OK button to confirm,
and press-s ~ to adjust.
••
cree«
•
011 Y,m, 011
011
S' •• pTlm,f
r:;I
SOUND
",Ul" 51", 011
~rl"H
U:;O IImer
IU s
."
Ol-'IIDN
':' Mo~e
l
Menu
D'"le.
NOTE:
Within 15 minutes there is no signal, the TV
will auto sleep.
Once you power off the TV set by AC, the clock time
will be reset.
5. OPTION MENU
The fifth item oftbe MENU is the OPTION MENU.
You can adjust the OSD Language, Aspect Ratio,
Blue Screen, Reset, Software Update(USB)
NOTE:
Restore factory default will clear all the programs
and Reset all the settings to default value.
6. USB FUNCTIO
You must enter the Source menu first,then cboice the
USB and press OK button,tbe USB menu will appear.
Please make sure that tbe USB device have plugged in
the slot. There are four type media item can be selected,
such as photo, music, Movie and text. Select the type
media item by pressing e ~,press OK button to enter
the disk selection menu.
In the movie mode, when you use FB, FF function, The
audio may be pause in several seconds to synchronize
the audio signal and video signal.
In text mode, press •••• to make page up and page down.
NOTE:
When the USB device isn't supported, it may be that the
power of the USB device isn't enough.
·12·

TVOW4YON
Press the ~ ~ to select the right disk and press OK to
display media files and folder list or choose Return to
back to the media type selection menu.
Select the media file by pressing-a ~ or T .•• ,then
the preview frame will pop up. Press the button
OK to play the media file in full screen. When the
media file (photo, music, Movie or text type) is
playing, press the OK or Info button can display the
control bar.
Press ~ ~ to select the function icon, press OK
button to confirm the function.
Press T or EXIT button to exit the control bar.
NOTE:
You can adjust the audio track, subtitle, or
program in the Info menu while Playing the video
file.Choose the Info icon and press OK can display
the Info MENU.
ATTENTION:
I. USB HOD compatibility is not assured.
2. Some format video is not played for some file reason.
3. Haier will not bear any responsibility for saving facility
quality problem or date missing.
-13-

TvQPER4UON
Hotel Mode:
Please press "MENU" button first,and press number button
"100 I" to enter into Hotel mode, tben press "OK" button to
select "On" or "OfT".
Source Lock:Lock the input source which you want.
Default Source:Set the default input source when tuning on
your TV.
Max Volume:Set max volume limited,this option allows you
to set tbe max volume level.
Default Volume:Power on default volume,press the button to
select the default volume.
Key Lock:Recall the default settings in Hotel mode.
Export Settings:Expon hotel settings to USB device.
Import Settings:lmpon hotel settings from USB device.
-14-

TROUBLE SHOOTING
.
Trouble phenomenon
Picture Audio Inspection
[IJ ~~
.', . ','
antenna position, direction
',' I 'J. ','
Snow oise or connection
., ': . ,
.. '
-,
[i]
Ghost ~< '1' antenna position, direction
ormal audio or connecnon
-,
UiIJ
~~
~ t' ~
Interfere oise electronic equipment,car
motorcycle.fluorescent light
-,
Ci:]Normal Picture
~/~
Volume(inspectwether the
mute function on the remote
Mute control are started, or audio
-,
system are correct or not)
~:~Power cord is not inserted
•
Power switch is not opened
o picture Mute Contrast and brightness/volume
setup
Press standby key on the remote
control for inspecting
Ci:]
/
o color ~ 1'1'Normal audio color control
-,
~
/
.~<:.>:::-:~:.:
Scramble
~ 1'1' ormal audio retune channel
or weak
-,
Ci:]
No color ~~ Noise Audio system
-,
Special Explanation: The accessories such as remote control is not belongs to the guarantee.
-15-

Heier
902-32B7H-10279 XW