Haier HWF80BW1 User manual

User Manual HWF80BW1

1
Thanks for purchasing a Haier Product
Please read these in ons carefully before using this appliance. The ins ons contain
important informa on which will help you get the best out of the appliance and ensure safe and
proper installa on, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe and proper use of
the appliance.
If you sell the appliance, give it away, or leave it behind when you move house, make sure you also
pass on this manual so that the new owner can become familiar with the appliance and safety
warnings.
Accessories
Check the accessories and literature in accordance with this list:
1x User Manual
1x Bo om Cover
1x Drain hose bracket
5x Blanking Plugs
1x Inlet hose assembly
Elements
User Manual HWF80BW1
1x Felt

2
................................................................................................................................................. 3
re e ...............................................................................................................................................5
.................................................................................................................................................8
e ...........................................................................................................................................16
Tr ubl g...................................................................................................................................19
Technical data .......................................................................................................................................20
rvi e...................................................................................................................................21
Legend
Ye
N
O l
Index
Disposal
The pre b h i l e r a
a f life he el r a i
i h a
Tpr a ge he r r l
l a p a e e i e r e
e e e . Th e e f a
ur .
h i he re her h e
pe relev h e k
r r l afe re fety.
rk he
releiaurpihT.eahrup a e h
r a .
not
not

3
Do…
Make sure that the transport bolt is removed.
Use a separate earthed socket for the power supply.
Make sure that the plug is accessible.
Hold the plug and not the electric cable when unplugging the
power supply.
Make sure that the fuses in the power circuit are rated for 15A.
and rubber components from aging.
Make sure that the power card is not caught under or in the appliance and avoid damage to
the power cable.
firm there will be leakage, turn off the water supply and refix it. Do not use the washing
.
Do not…
Touch or use the appliance when barefoot or with wet or damp hands or feet.
Use flammable detergent or dry cleaning agent.
Use any flammable sprays in close vicinity to the appliance.
Remove or insert the plug in presence of flammable gas.
Allow children or infirm persons to play with the appliance or packing materials.
Install the appliance outdoors in a damp place, or in an area which may be prone to water
leaks such as under or near a sink unit. In the event of a water leak allow the machine to dry
naturally.
Place the washing machine directly on a carpet, or close to a wall or furniture.
During daily use of the appliance
Do…
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory
concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with
the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Pull up zips and fix loose threads to prevent the items from being entangled. If necessary, put
small items into a small bag or net．

4
Let the power cord be replaced by the manufacturer, his service agent or other accordingly
qualified people, in case it is damaged.
Do not…
Touch thewasher door during the washing process, it gets hot.
Place heavy objects or sources of heat or damp on top of the appliance.
Hot wash from rubber or sponge-like materials
.elcychsawehtgnirudrewardnoitubirtsidtnegretedehtnepO
Force thewasher door to open,the door ed with a self-lock device and will open shortly
he washing procedure is ended.
Open the washer door if the water level is visibly over the porthole.
Cover the washing machine with c cover so that the washing machine can dry out when not in use
Saving Tips
Achieve the best use of energy, water, detergent e by using the recommended
maximum load size
Do not exceed the detergent dosages indicated in the manufacturer’s instruc ns.
Use “Prewash” for heavily soiled laundry only. Save detergent me, water and energy
consump by not s ng “Prewash” for slightly to normally dirty laundry.
Save me by n speed to reduce the water content in laundry
.reyrdelbmutagnisuerofeb
Choose the correct washing temperature.Modern detergents can wash with very good result
already in lower temperature than 60°C. Only use higher temperature than 60°C for very dirty
laundry.
electricity, and for safety. Wipe clean the lower part of the porthole.
odors.

5
Before Use
Descrip on
This diagram may be slightly nt from the layout of the washing machine you have just
purchased.
Preparing the machine
Remove all the packing materials to prevent unsteadiness, including
the polystyrene base. Upon opening the package, water drops may be
seen on the pla bag and the porthole. This is normal phenomenon
resul ng from water tests in the factory.
Before Use
T1 T2
T3 S1
S2 S4
S3
T4
Drain hose
Water inlet valve
Power cord
Back cover screws
Back cover
e
n
Control panel
Start/Pause
Door handle
Work top
Washer door
Filter cover

6
In on
Dismantle the transport on bolts
The transpo on bolts are designed for clamping an -
vib on components inside of the washing machine during
the transpo on process.
Remove the back cover.
Remove the four bolts on the rear side and take out
Replace the back cover.
Fill the holes le by the bolts with blanking plugs.
Note:
When you replace the back cover, the convex
must face to outside, and you have to insert the
back cover from the two gaps as shown in fig.5.
Keep the transporta on bo
stabilizers in a safe place for later use.
Before Use
5.
2.Put down the machine backwards, Remove the four screws (figure 2.)
upright.
1. 3.
2.
They are used for
There are adjustable feet under the bo om of the washing machine. Before
use, they should be adjusted so that the machine is level. This will minimize
vibr ons and thus noise during use. It will also reduce wear and tear. We
recommend to use a spirit level for adjustment.Floor should be as stable and
flat as possible.
1. Loose the lock nut (1) by using a wrench.
2. Adjust the high by turning the foot (2).
3. Tighten the lock nut (1) against the housing.
Adjus ng the feet and locking nut

7
Inlet Hose
Connect the nut on the inlet hose to the
connector on the water valve.
Connect inlet hose to a water tap with cold,
fresh water.
Use the hose-set supplied with the appliance.
Old hose-sets should not be reused.
Drain Hose
Use the drain hose bracket to keep the end of the
drain hose retained and prevents the of
water. Don't extend the lengthof the drain hose; if
an extended hose is required, please consult a
serviceman or plumber.
The height of the drainage outlet must be 80-100
cm. Fix the drain hose to the clip at the back of the
washingmachine to prevent it from dropping off.
The drain hose should not be submerged inwater and should be securely fixed and leak-free.
If the drain hose is placed on the groundor if the pipe is at a height of less than 80cm, the
washingmachine will con nuously drain while beingfilled (self-siphoning).
Conne ng to Power Supply
Before connec ngto the power supply, check:
The socket is adequate for the maximum power of the washing
machine (For safety, fuses in the power circuit should be rated
for no less than 15A).
The voltageshould meet the requirement
The power outlet should be capable of accep ngthe washing
machine plug.
Connect the machine to an earthed socket outlet.

8
1.
2.
3. Program Dial
4. Wash Temp
5. Spin Speed
6.
7. Extra Rinse
8.
9.
10. LED Display
Delay
Oper onal Func ons
Nº Func on Explica on
1 Detergent
drawer
2
Program Dial
Wash Temp
Spin Speed
3
4
5
6
ons
Open the drawer, three compartments can be seen:
Compartment 1: Prewash detergent
Compartment 2: Detergent for programs 1 to 15.
By turning the knob clockwise/counterclockwise, the required program can
corresponding light will illuminate.
indicator. Select a temperature according to the type of laundry.Note: If there
is no indicator light displayed, this means cold wash.
will be displayed on the indicator.Note: If there is no indicator light displayed,
this means no spinning.
Di erent water temperatures and spinning speeds can be set for
special requirement.
1
2
for the various washing temperatures, please refer to the
manual of detergent.
6
very dirty,
Control Panel
14
01
2
3
567 98
BLDC
8kg
Speed Up

9
Extra Rinse
Start/Pause
disappears when the extra rinse ends.
When the washing machine is connected to the power socket and a
screen start blinking, press the Power switch, the program will be cancelled.
accordingly. When the laundry is not balanced during spinning, the
1-15 are used.
the washing machine will start the wash program directly.
To cancel audible alarm
Alarm sound can be cancelled if it is required (not recommended)
Switch on the washing machine and turn the program knob to spin cycle, then press the
been cancelled.
To reinstate audible alarm
Switch on the washing machine and turn the program knob to spin cycle, then press the
7
8
9
LED Display
10
Delay
Speed Up
SPEEd uP
SPEEd uP