HairMax LaserBand 41 User manual

QUICK START GUIDE
HAIRMAX®LaserBand 41
FOR MAXIMUM BENEFIT:
•Scalp should be freshly washed (hair can be wet, dry or damp)
•Use your HairMax prior to applying styling products (these can build up and
impede the laser light)
•Regularly clean the laser area with a damp cloth. Do not use harsh detergents
or cleaning products on any part of your HairMax
CHARGING OPTIONS
Charge your HairMax for 4-6 hours before initial use.
Prior to charging your HairMax, make sure your HairMax is turned off.
OPTION 1 Plug the power cord into the charging stand and the other end into
an electrical wall outlet (Figure A). Place your HairMax on the charging stand. The
device indicator white light will ash during the charging process. A steady light
indicates your HairMax is fully charged.
OPTION 2 Place the power cord directly into the charging socket on the side of
your HairMax and the other end into an electrical wall outlet (Figure B).
The device indicator white light will ash during the charging process. A steady
light indicates your HairMax is fully charged (Figure C).
Do not use your HairMax while it is plugged into the power cord.
Prior to treatment, test your HairMax for sensitivity (Figure D). For more
information, see page 5 of the user manual.
3times
per week
Use your HairMax for as little as 3 minutes,
3 times a week, ideally every other day
(for example, Monday, Wednesday, Friday).
3
minutes
as little as
HAI
HAI
HAI
HAI
HAI
HAI HAI
HAI
HAI
HAI
H
A
I
R
M
A
X
HAI
A
HAI
HAI
HAI
HAI
HAI
HAI HAI
HAI
HAI
HAI
H
A
I
R
M
A
X
HAI
B
HAI
HAI
HAI
HAI
HAI
HAI HAI
HAI
HAI
HAI
H
A
I
R
M
A
X
HAI
C
HAI
HAI
HAI
HAI
HAI
HAI HAI
HAI
HAI
HAI
H
A
I
R
M
A
X
HAI
D

Laser Light - Avoid Direct Eye Exposure
HairMax®laser devices are indicated to treat Androgenetic Alopecia, and promote hair growth in males who have Norwood-
Hamilton Classications of lla to V and in females who have Ludwig (Savin) I-4, II-1, II-2, or frontal patterns of hair loss and
who both have Fitzpatrick Skin Types I to IV.
LIT QSGLB41G 05 0219
After treatment, turn off your HairMax
by pressing the power button once
(Figure E). Remove your HairMax
from your head and place it on the
charging stand for future use.
NOTE: The LaserBand 41 turns off
automatically after 12 minutes.
TREATMENT METHOD
Your HairMax will be used in 6
positions on your scalp. Leave it in
place for a minimum of 30 seconds
for each position. It will vibrate every
30 seconds to let you know when to
move it to the next position.
To turn on your HairMax, press the
power button once to activate the
red lasers (Figure E). The lasers will
not turn on until placed on your head.
Next, place it on your frontal hair line.
This is position 1. When you feel the
vibration, slide it backwards about 2
inches (5 cm) to position 2. Leave it in
position 2 until you feel the vibration
again.
Repeat this process for all six positions
on your scalp. The entire treatment
should be a minimum of 3 minutes.
HAI
HAI
HAI
HAI
HAI
HAI HAI
HAI
HAI
HAI
H
A
I
R
M
A
X
HAI
1
HAI
HAI
HAI
HAI
HAI
HAI HAI
HAI
HAI
HAI
H
A
I
R
M
A
X
HAI
2
HAI
HAI
HAI
HAI
HAI
HAI HAI
HAI
HAI
HAI
H
A
I
R
M
A
X
HAI
3
HAI
HAI
HAI
HAI
HAI
HAI HAI
HAI
HAI
HAI
H
A
I
R
M
A
X
HAI
4
HAI
HAI
HAI
HAI
HAI
HAI HAI
HAI
HAI
HAI
H
A
I
R
M
A
X
HAI
5
HAI
HAI
HAI
HAI
HAI
HAI HAI
HAI
HAI
HAI
H
A
I
R
M
A
X
HAI
6
HAI
HAI
HAI
HAI
HAI
HAI HAI
HAI
HAI
HAI
H
A
I
R
M
A
X
HAI
E
The HairMax® LaserBand is a highly effective device when used correctly. It
is manufactured using precision components and should last many years of
normal use. If you experience difculties with your device, please refer to the
troubleshooting section of your user manual (page 14).
For detailed information about proper use, warnings and cautions, please
take time to read the entire user manual before operating your HairMax.
For safety reasons, your HairMax®device contains a proximity sensor. The
lasers will NOT turn on unless the device is placed on your head or when you
place your hand inside the device to test for laser sensitivity in the user manual
(page 5).