The HairMax® LaserBand is a highly effective device when used correctly. It is manufactured
using precision components and should last 10-15 years with normal use. Please take time
to read the User Manual before operating your HairMax.
LaserBand 41 Model
3times
per week
3
minutes
For maximum benefi t:
• Scalp should be freshly washed (hair can be wet, dry or damp)
• Use your HairMax prior to applying styling products (these can build up and impede
the laser light)
• Regularly clean the laser area with a damp cloth. Do not use harsh detergents or
cleaning products on any part of your HairMax
Charging Options
Charge your HairMax for 3-4 hours before initial use.
Prior to charging your HairMax, make sure your HairMax is turned off.
OPTION 1 Plug the power cord into the charging stand and the other end into an electrical
wall outlet (Figure A). Place your HairMax on the charging stand and wait until the indicator
light starts fl ashing. If the indicator light does not start fl ashing within 5 seconds, reposition
your device on the charging stand.
OPTION 2 Place the power cord directly into the charging socket on the bottom left side
of your HairMax and the other end into an electrical wall outlet (Figure B).
The indicator light will fl ash during the charging process. A steady light indicates your
HairMax is fully charged (Figure C).
Do not use your HairMax while it is plugged into the power cord.
B
AC
Use your HairMax for as little as 3 minutes, 3 times a week,
ideally every other day (for example, Monday, Wednesday,
Friday).
Laser Light - Avoid Direct Eye Exposure
Prior to treatment, test your HairMax for
sensitivity (Figure D). For more information, see
page 5 of the User Manual.
D
After treatment, turn off your HairMax by pressing
and holding the power button until the lasers turn off
(Figure E). Remove your HairMax from your head and
place it on the charging stand for future use.
E
Treatment Method
Your HairMax will be used in 6 positions on your
scalp. Leave it in place for a minimum of 30
seconds for each position. It will vibrate every 30
seconds to let you know when to move it to the
next position.
To turn on your HairMax, press and hold the power
button until the red lasers turn on (Figure E). Next,
place it on your frontal hair line. This is position
1. When you feel the vibration, slide it backwards
about 2 inches (5 cm) to position 2. Leave it in
position 2 until you feel the vibration again.
Repeat this process for all six positions on your
scalp. The entire treatment should be a minimum
of 3 minutes.
1 2
3 4
5 6