HairMax LaserBand 82 User manual

REGISTER
To validate your warranty
register online at
www.hairmax.com/warranty
or call Customer Service
toll-free at 1-866-527-3726
CONTACT
Lexington International, LLC
777 Yamato Road, Suite 105
Boca Raton, FL 33431
[phone]
HAIRMAX.com
Please Note:
The time required for treatment with the HairMax LaserBand
is less than 90 seconds.
The LaserBand will automatically turn off after 5 minutes.
While there are no negative effects from overuse, it is
recommended that you use the LaserBand according to
directions.
The LaserBand has advanced electronics to ensure the device
is working properly. If for some reason you are experiencing
difficulties with your device, before sending it back to us for
repair, refer to the troubleshooting section of your User
Manual on Page 14.
For further assistance call [phone].
LIT QSGLB82-00 06/15
QUICK START GUIDE
LaserBand 82
HairMax®
T
r
w
o
t
o
C
O
L
e
x
7
7
7
B
o
c
+
1
-
5
H
H
A
A
I
I
R
The HairMax LaserBand 82 is indicated to treat Androgenetic Alopecia, and promote hair
growth in males who have Norwood Hamilton Classifications of IIa to V and in females who
have Ludwig (Savin) I-4, II-1, II-2, or frontal patterns of hair loss and who both have Fitzpatrick
Skin Types I to IV.
© Copyright 2015 Lexington Intl., LLC. All rights reserved.
161803_Lex.indd 1161803_Lex.indd 1 6/16/15 4:48 PM6/16/15 4:48 PM
Process CyanProcess CyanProcess MagentaProcess MagentaProcess YellowProcess YellowProcess BlackProcess Black

Charge your LaserBand for 2-3 hours before
initial use. Charge the LaserBand by plugging
the power cord directly into the charging
socket on the bottom right side of the
LaserBand (Figure A). Plug the other end into
an electrical socket.
The indicator light on the power button will
flash blue during the charging process. A
steady blue light indicates your LaserBand
is fully charged (Figure B).
The HairMax LaserBand 82 is a highly effective device when used
correctly. It is manufactured using precision components and should
last 10-15 years with normal use. Please take time to read the User
Manual before operating the LaserBand.
90
seconds
less than
Use the LaserBand 82 for less than 90
seconds, 3 times a week, ideally every
other day (for example Monday,
Wednesday, Friday).
For maximum benefit:
• Scalp should be freshly-washed (hair can be wet, dry or damp)
• Use the LaserBand prior to applying styling products (these
can build up and impede the laser light)
• Regularly clean the laser window with a damp cloth. Do not use
harsh detergents or cleaning products on any part of the
LaserBand
Laser Light - Avoid Direct Eye Exposure
A
B
F
C
G
D
E
NOTE - POSITION THE LASERBAND
WITH THE POWER BUTTON ON
THE RIGHT SIDE OF YOUR HEAD.
LaserBand 82 Model
Choose either the 4-second OR the 30-second treatment method.
(Do not treat your hair with both methods).
HMLC00010000
Safety Label
Serial Number
Before beginning treatment, test the LaserBand
for sensitivity (see page 5) of the User
Manual). Next, press the power button once to
activate the 4-second treatment method OR
twice for the 30-second treatment method
(Figure C). See Page 11 of the User Manual for
a more in-depth explanation of the two
treatment methods.
Second Treatment Method
Press the power button once to select the
4-second treatment method. Place the
LaserBand at your hairline and leave it in place
until it vibrates (Figure D). Next, slide the
LaserBand to the middle portion of your scalp
using light pressure so the teeth can separate
your hair (Figure E). When your LaserBand
vibrates again, slide it to the last spot on your
scalp (Figure F). This completes the first pass
of your treatment. Repeat this process 6 times
to complete today’s treatment.
30-Second Treatment Method
Press the power button twice to select the
30-second treatment method. Place the
LaserBand at your hairline and leave it in place
until it vibrates (Figure D). Next, slide the
LaserBand to the middle portion of your scalp
using light pressure so the teeth can separate
your hair (Figure E). When your LaserBand
vibrates again, slide it to the last spot on your
scalp (Figure F). You have completed today’s
treatment.
After treatment, turn off the LaserBand by
pressing and holding the power button until
the indicator light turns off (Figure G). Remove
the LaserBand from your head and plug it into
the charger for future use.
161803_Lex.indd 2161803_Lex.indd 2 6/16/15 4:48 PM6/16/15 4:48 PM
Process CyanProcess CyanProcess MagentaProcess MagentaProcess YellowProcess YellowProcess BlackProcess Black