Halfords 635780 User manual

WW
H
H
Down Tube Profiles
Ø min. 28 mm
Ø max. 70 mm
W: min. 28 / max. 60 mm
H : min. 28 / max. 70 mm
W: min. 28 / max. 60 mm
H : min. 28 / max. 70 mm
W: min. 28 / max. 60 mm
H : min. 28 / max. 70 mm
ROOF MOUNT CYCLE CARRIER FITTING INSTRUCTIONS

700005800000
700010800000
700010900000
700006200000
700011000000
700011200000
700011100000
700003600000
700011300000
4
A
N Q
2
3
B
12
E
11
C
10
9
8
7
5
6
1
2
1
1
4
6
4
12
2
3
3
1
1
1
1
Ø6x12
M6
M6x14
Ø8x17
M8x100
Ø6x18
5
2
1
3
4
14
13
12
11
10
9
8
6
7
2
1
1
1
3
3
6
6
3
3
1
2
1
1
N. Q.
Ø8x17
M8x100
Ø6x18
To order spare parts please contact your local Halford's store.
Components (Included)
Spare Parts (Made to order) Code
-2-

700005800000
700010800000
700010900000
700006200000
700011000000
700011200000
700011100000
700003600000
700011300000
4
A
N Q
2
3
B
12
E
11
C
10
9
8
7
5
6
1
2
1
1
4
6
4
12
2
3
3
1
1
1
1
Ø6x12
M6
M6x14
Ø8x17
M8x100
Ø6x18
5
2
1
3
4
14
13
12
11
10
9
8
6
7
2
1
1
1
3
3
6
6
3
3
1
2
1
1
N. Q.
Ø8x17
M8x100
Ø6x18
To order spare parts please contact your local Halford's store.
Components (Included)
Spare Parts (Made to order) Code
12 11 12 113991313410
14 11
12 11 812 11
11
12
2
7
6
3
7
9
4
10
5
14
10
14
12
11
-3-

2a
E E
DD
A
C
B
B
4
C
42
N. Q.
1
2
3(page 5)
4
OK NOT OK
Before tting carrier to roof bars, place your bike onto carrier and adjust the frame clamp into correct position.
Remove your bike from carrier. Then continue to place your carrier onto roof bars and secure as per the
instructions that follow.
-4-

2a
E E
DD
A
C
B
B
4
C
42
N. Q.
1
2
3(page 5)
4
OK NOT OK
Before tting carrier to roof bars, place your bike onto carrier and adjust the frame clamp into correct position.
Remove your bike from carrier. Then continue to place your carrier onto roof bars and secure as per the
instructions that follow.
13 13
13
2b
=X
X
A
13 3
N. Q.
2c
3
BA
C
B
C
E
D
A
E
D
C
B
B
C
D
D E E
OR
13
13
-5-

12
11
9
8
6
6
3
1
N. Q.
Ø6x18
2
3
12
11
12
11
1010
11 128
11 12 11 12
12 11 9
NO OK
4
5
Fitting Cycle carrier to your roof bars
Securing bike to the carrier
Please tighten both clamps
evenly to secure bike frame
3
3
2
-6-

ROOF MOUNT BIKE CARRIER 15 kg / 33.1 lbs
2.7 kg / 6 lbs
Car
Manual KG
10+14
10+14
10+14
10+14
6
14
10
3
3
N. Q.
14
10
113
km/h
70
mph
10+14
10+14 13
Once bike is
secure in frame
clamp, please lock
the frame clamp and
secure bike wheels
using the red
straps.
180°
12
11
9
8
6
6
3
1
N. Q.
Ø6x18
2
3
12
11
12
11
1010
11 128
11 12 11 12
12 11 9
NO OK
4
5
Fitting Cycle carrier to your roof bars
Securing bike to the carrier
Please tighten both clamps
evenly to secure bike frame
3
3
2
-7-

Made in the EU
Halfords Ltd, Icknield Street Drive, Washford West
Redditch, B98 0DE
visit us at www.halfords.com
Item Code: 635780
Dear Consumer, Thank you for choosing one of our products. Your accessory was designed,
manufactured and tested with care and in compliance with the strictest regulations in force.
Please read these instructions carefully to ensure your own safety and that of all other
travellers. Keep this instruction booklet, and in particular the accessory installation manual,
in your car. Read the instruction manual carefully before assembling, mounting and loading
the accessory. Always remember to comply with the legislation in force in the country of
destination.
Installation
•Clean the roof or the part of the roof where the accessory is to be mounted.
•Install the accessory only as described in the instruction booklet provided.
•Check that all the parts referred to are included. Do not install and use the product if any
parts or accessories are missing.
•Do not modify or tamper with the accessory under any circumstances.
•Do not mount or use the product if you have any doubts on how to assemble it; in this case,
contact your local retailer.
•Having mounted the accessory on the vehicle, check that it is securely tted. Clamping
mechanisms must always be re -tightened after cycle has been mounted.
•Do the same once you have placed a load on the accessory.
Note: take care to ensure that when assembled the product does not hinder the operation of
or damage any aerials, sunroofs, spoilers or any other accessories mounted on the car roof.
Loading
•Before loading the accessory consult the use and maintenance manual of the vehicle to
check the load.
•Never exceed the permitted load of the car roof and the accessory.
•The maximum permissible roof loads must not be exceeded ( see vehicle handbook for
details of the maximum roof loads). The roof load will comprise of the weight of the load
bars, the carrier plus additional racks and the cycle load. Do not exceed a maximum load
of 15kg per cycle carrier ( 1 adult cycle).
•Position the load so that it does not extend beyond the width of the vehicle, ensuring that
the centre of gravity of the load is as low as possible and that the centre of gravity lies
between the roof bars. Always remember to comply with the legislation in force in the
country of destination.
•Both bike wheels must be securely strapped to the carrier using the straps supplied.
•Place skis and snowboards with the tips pointing towards the rear of the vehicle and do not
cover the load with any parts which could increase their aerodynamic resistance; check that
the skis do not slide out from the front when the bindings are touching the rear accessory.
•When loading small boats, canoes, surfboards, kayaks etc. also x them to the front and
rear of the vehicle.
•When loading objects with removable parts, make sure that these are removed rst, to
ensure safety and fuel savings (child seats on bikes, pumps, baskets, etc.).
•Make sure that the load does not come into contact with the vehicle roof to avoid damage
to the roof.
•Before starting your journey, make sure that all parts are closed and well tightened; during
the journey, periodically check the tightening of the belts, nuts and bolts generally, and
check that the load is well secured. Repeat the operation at regular intervals, depending
on the type of road.
•Do not x the load with elastic straps.
Use and driving
•Installing accessories on the car roof increases the height and weight of the vehicle; take
great care in underpasses, garages, tunnels, etc.
•Take care when opening the boot; consider the size of the accessory and the transported
load.
•After installing the rack and the load, moderate your driving speed when accelerating,
braking and on bends.Wind, sharp braking, tight bends, bumps and potholes in particular
can alter the driveability of the vehicle.
•Reduce your speed according to the local legal limits and never exceed 70 mph/113 km/h.
Always adjust your speed to suit the conditions of the road, trac, weather, transported
load and allow for longer braking distances.
•Do not approach speed bumps at a speed of more than 15 km/h (9 mph).
•Check the integrity and tightening of the load and the accessory before each use.
•For your own safety and that of other road users and to avoid wasting fuel, remove the
accessory from the roof when not in use.
•Remove the accessory before washing the car in automatic car washes.
•The accessory is tested for road driving.
Maintenance and storage
•With time, the straps, bolts etc. and other parts subject to wear may become damaged
and must be replaced. Lubricate the adjusting screws and bolts to extend the life of the
accessory.
•If the accessory is accidentally dropped, immediately check that there is no damage such
as cracks or visible dents which could compromise the correct operation of the accessory.
In this case, replace the damaged part or the whole accessory.
•The product must be cleaned regularly with hot water and pH-neutral detergent, then
dried with a cloth. Avoid contact with aggressive chemical agents (e.g. solvents).
•Do not drop the accessory.
Liability
When transporting any items on your vehicle, you are solely liable for your safety and that
of others.The manufacturer declines all liability for any damage caused to property or injury
to persons caused by the incorrect installation of the accessory, any excess speed or driving
that does not consider the conditions of the weather, trac or road surface. Inform any other
drivers using your car when the accessory is installed of these warnings. The manufacturer
shall not be liable for any damage to property or injury to persons during the installation of
the accessory.
Disposal
•Dispose of this product and its packaging respectfully and ecologically, sorting the
dierent materials for recycling, as required by local laws.
•Where possible dispose of this product via a waste disposal company - ask your local
competent authority if any further information on this matter is required.
•Comply with all the laws in force in the country of destination.
Please ensure you read the enclosed Cautions and Advisory notes below:
Table of contents
Other Halfords Automobile Accessories manuals
Popular Automobile Accessories manuals by other brands

National Cycle
National Cycle Quantum Wash'n'Wipe N30208 Assembly instructions and owner's manual

Caltrend
Caltrend TY280 installation instructions

Romik
Romik 2162 installation instructions

HaWeKo
HaWeKo VWK500 installation manual

Garmin
Garmin RV-BBT600 Series installation instructions

Dynojet
Dynojet Power commander V installation instructions