Halma Ocean Optics Jaz Ferrite User manual

100-4000-028-01-201510 1
Jaz Ethernet Ferrite Installation
Overview
A ferrite is provided with your JAZ-E Ethernet module to be used in the event that you experience
interference with any electronic devices.
Connecting the Ferrite to the Jaz Ethernet Cable
►Procedure
1. Find the Ethernet cable and the ferrite that you received in your Jaz package.
2. Open the ferrite.
3. Place the ferrite on the Ethernet cable as close to the connector for the computer as possible.
4. Loop the Ethernet cable through the ferrite twice.

Jaz Ethernet Ferrite Installation Instructions
2 100-4000-028-01-201510
5. Snap the ferrite closed to lock it in place.
6. Plug the Ethernet cable into the Ethernet connector on the JAZ-E module, and then to a
Power Over Ethernet (POE) bridge or switch to the network (e.g., an 8-port network hub).
Product-Related Documentation
You can access documentation for Ocean Optics products by visiting our website at
http://www.oceanoptics.com. Select Support→Technical Documents, then choose the appropriate
document from the available drop-down lists.
Support Contact
Please contact Ocean Optics Customer Support at www.oceanoptics.com or 1-727-733-2447 for any
questions.