Halo ACDC BOLT 58830 User manual

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
1
1
5
V
A
C
/
6
5
W
M
A
X
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)
PLEASE READ BEFORE OPERATING THIS EQUIPMENT
Contains a 58830 mWh battery
®

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
2 | POWER YOUR LIFE
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
POWER YOUR LIFE | 3
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
4 | POWER YOUR LIFE
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
POWER YOUR LIFE | 5
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
3-4
6
7-15
11, 13
16
18
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

JU M P
STA R T
5V/2.4A 5V/2.4A
JU M P
STA R T
IN PUT
HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
6 | POWER YOUR LIFE
1| Jump Start Output
2| Jump Start Button
3| USB Output 1
4| USB Power ON/OFF Button
5| USB Output 2
6| DC Input: DC 14V/.85A
7| LED Battery Indicator
8 | LED Floodlight
9| LED Floodlight Button
10 | Positive Clamp
11 | Negative Clamp
12 | Jump Start Plug
13 | AC Output Port
14 | AC Power ON/OFF Button
13 5 6
2 4 7
8
9
10
13
12
14
11
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
- Car Charger
- AC Wall Charging Adapter
- Operating Instructions
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
R
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
POWER YOUR LIFE | 7
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
When you’re on the road, you can also use
the supplied car charger to charge your
HALO BOLT ACDC 58830.
R
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
HALO BOLT ACDC 58830 POWER LEVEL INDICATORS
INDICATOR LIGHTS HOW TO READ AMOUNT OF CHARGE
One solid light 0%-25%
Two solid lights 26%-50%
Three solid lights 51%-75%
Four solid lights 76%-100%
First light blinking
0%-25%
First light solid,
second light blinking
26%-50%
First two lights solid,
third light blinking
51%-75%
First three lights solid,
fourth blinking
76%-100%
All four lights solid 100% fully charged
HALO BOLT ACDC 58830 POWER LEVEL INDICATORS
WHILE CHARGING:
INDICATOR LIGHTS HOW TO READ AMOUNT OF CHARGE
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
8 | POWER YOUR LIFE
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
Positive Clamp
Negative Clamp
NOTE:
Make sure the jumper cables are fully plugged into the jump start
output before trying to jump your vehicle.
NOTE:
Do not touch red (positive) and black (negative) clamps together
at any point. If the jump start button ashes red, the jumper cables
have been connected incorrectly. If this ashing red condition
occurs, disconnect the jumper cables from the HALO BOLT ACDC 58830
and vehicle battery and restart the process from Step 1.
Positive Clamp
Negative Clamp
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
POWER YOUR LIFE | 9
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
NOTE:
A ashing green light indicates safety checks are in progress.
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
10 | POWER YOUR LIFE
JU M P
STA R T
5V/2.4A 5V/2.4A
JU M P
STA R T
JUM P
START
JUM P
START
IN PUT
NOTE:
The HALO BOLT ACDC 58830 will allow 3 consecutive jump start
attempts after each time you press the jump start button. You must
allow up to 15 seconds between each jump start attempt. During the
15 seconds, the jump start button will ash green while the HALO
BOLT ACDC 58830 performs its safety checks. Once the jump start
button illuminates solid green, the HALO BOLT ACDC 58830 is ready
for the next jump start attempt.
If your vehicle does not start after three attempts, we recommend
you consult a certied mechanic.
NOTE:
While jump starting your vehicle, you cannot charge your electronic
devices using the USB or AC output ports and you cannot charge the
HALO BOLT ACDC 58830 via the AC wall charging adapter.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
NOTE:
If none of these troubleshooting tips work, please consult a certied
mechanic for assistance.
JUMP START TROUBLESHOOTING TIPS
Condition Potential Cause Solution
HALO BOLT ACDC
58830 shuts o
unexpectedly
HALO BOLT ACDC
58830 Jump Start and
On/O button ashes
red and blue
HALO BOLT ACDC
58830 battery
indicators ash green
HALO BOLT ACDC
58830 Jump Start
button ashes red
HALO BOLT ACDC
58830 Jump Start
button ashes green
continuously
The HALO BOLT ACDC 58830 is not
suciently charged to jump start the
vehicle.
The HALO BOLT ACDC 58830 detects
that it is connected to a vehicle battery
that does not require a jump start. This
could indicate that the vehicle battery
or other component is faulty.
This could occur when attempting to
jump start a vehicle while other
electrical components (i.e. headlights,
heater, radio, etc.) are on.
The vehicle battery may be faulty.
The HALO BOLT ACDC 58830 has
detected a high temperature condition.
The jumper cables have not been
properly connected to the vehicle
battery.
Recharge the HALO BOLT ACDC
58830.
It is recommended that you consult
with a certied mechanic.
Turn o your headlights and any
other components that may drain
your car battery and try the jump
start process again.
It is recommended that you consult
with a certied mechanic.
Disconnect the HALO BOLT ACDC
58830 and allow it to cool for several
minutes. Then try the jump start
process again.
Check the jumper cables and ensure
that the red clamp is connected to
the positive terminal (+) and the
black clamp is connected to the
negative terminal (-)
The HALO BOLT ACDC 58830 is waiting
to be connected to a battery.
Check the jumper cables and ensure
they are properly connected to the
battery.
HALO BOLT ACDC
58830 Jump Start
button has been
pressed but nothing
happens
The blue LED power button is ON. Ensure the unit is OFF and then
press the Jump Start button.
CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)
POWER YOUR LIFE | 11

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
12 | POWER YOUR LIFE
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
NOTE:
Any electronic device can be powered by the AC output port as long as
it is rated at 65 watts or less. BE SURE TO CHECK THAT YOUR LAPTOP OR
OTHER ELECTRONIC DEVICE IS RATED AT 65 WATTS OR LESS.
NOTE:
Make sure the AC power plug is fully plugged into the AC output port
before turning on the AC Power ON/OFF Button.
NOTE:
A ashing green light indicates safety checks are in progress. If you see
a ashing red light, the device you connected is rated for greater than
65 watts and cannot be powered using the HALO BOLT ACDC 58830.
The HALO BOLT ACDC 58830 will automatically power o after 30
minutes of inactivity. While jump starting your vehicle, you cannot
charge your electronic devices using the USB or AC output ports and
you cannot charge the HALO BOLT ACDC 58830 via the AC wall
charging adapter.
AC Power ON/OFF Button
LAPTOP CHARGING TROUBLESHOOTING TIPS
1
1
5
V
A
C
/
6
5
W
M
A
X
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
POWER YOUR LIFE | 13
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
Condition Potential Cause Solution
HALO BOLT ACDC
58830 shuts o
unexpectedly
HALO BOLT ACDC
58830 battery
indicators ash green
HALO BOLT ACDC
58830 AC button
ashes red
A single LED battery
indicator ashes
green
The HALO BOLT ACDC 58830 has
detected a high temperature condition.
The HALO BOLT ACDC 58830 is not
suciently charged to power the
connected electronic device.
Disconnect the HALO BOLT ACDC
58830 and allow it to cool for several
minutes. Then try to power your
device again.
Electronic device is rated at greater
than 65 watts
Only electronic devices rated at 65
watts or less can be used with the
HALO BOLT ACDC 58830
The HALO BOLT ACDC 58830 is not
suciently charged to power the
connected electronic device
Recharge the HALO BOLT ACDC
58830
Recharge the HALO BOLT ACDC
58830
Recharge the HALO BOLT ACDC
58830
The HALO BOLT ACDC 58830 is getting
low on power.
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
NOTE:
The HALO BOLT ACDC 58830 USB charging feature will automatically
power o after 30 minutes of inactivity.
While jump starting your vehicle, you cannot charge your electronic
devices using the USB or AC output ports and you cannot charge the
HALO BOLT ACDC 58830 via the AC wall charging adapter.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
JU M P
STA RT
5V/2.4A 5V/2.4A
JU MP
STA RT
IN PUT
USB Plug
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
14 | POWER YOUR LIFE
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
Micro USB
NOTE:
If your electronic device does not have a Micro USB Input, your HALO
BOLT ACDC 58830 is also compatible with the charging cable
provided with your electronic device. To use, plug the Standard USB
end of the cable into either one of the two 5V/2.4A USB Output ports
located on your HALO BOLT ACDC 58830.
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
NOTE:
Do not look directly into the LED oodlight.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
LED Floodlight On/O Button
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
POWER YOUR LIFE | 15
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
Mobile Phones Tablets Digital Cameras Mobile Gaming
+
more!
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
16 | POWER YOUR LIFE
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
POWER YOUR LIFE | 17
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
18 | POWER YOUR LIFE
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
POWER YOUR LIFE | 19
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)

HALO BOLT ACDC 58830
Thank you for choosing HALO!
Powerful, compact and easy to use, the HALO BOLT ACDC 58830 can
safely jump start your car or charge your laptop. In addition, you can
use it to charge your phone, tablet or other electronic devices! The
HALO BOLT ACDC 58830 also features a convenient LED oodlight.
TABLE OF CONTENTS
Safety Precautions
Included Items
Operating Instructions
Troubleshooting Guide
Specications
Warranty and Contact Information
INCLUDED ITEMS
- HALO BOLT ACDC 58830
- Jumper Cables
- USB to Micro USB Cable
- Carrying Pouch
LOCATION OF CONTROLS
OPERATING INSTRUCTIONS
Please make sure to fully charge the HALO BOLT ACDC 58830.
CHARGING THE HALO BOLT ACDC 58830
To recharge the HALO BOLT ACDC 58830, use the provided AC wall
charging adapter cable, and plug the AC adapter tip into the charge
input.
Next, connect the AC adapter into a wall outlet. The HALO BOLT ACDC
58830 will automatically begin charging. When the HALO BOLT ACDC
58830 is fully charged, all four indicator lights will be solid green (This
could take up to 9 hours).
When your HALO BOLT ACDC 58830 is on, the LED indicator lights will
display the power level.
JUMP STARTING YOUR VEHICLE WITH
THE HALO BOLT ACDC 58830
1. Plug the jumper cables into the jump start output on the
HALO BOLT ACDC 58830.
2. Attach the jumper cable clamps to the vehicle battery.
- Red clamp on positive terminal (+)
- Black clamp on negative terminal (-)
3. Press the “Jump Start” button and wait for solid green light.
4. Start your vehicle.
5. Disconnect the jumper cable clamps from the car battery.
JUMP START TROUBLESHOOTING TIPS CHARGING AN ELECTRONIC DEVICE USING
5V/2.4A USB OUTPUT PORT
1. Connect the Micro USB tip of the supplied Micro USB cable into the
Micro USB input of your electronic device and connect the Standard
USB end of the supplied Micro USB cable into either one of the
HALO BOLT ACDC 58830 USB 5V/2.4A Output ports.
2. Turn on the USB charging feature by pressing and releasing the
USB Power ON/OFF Button on the HALO BOLT ACDC 58830.
HALO SMART CHARGE TECHNOLOGY
Your HALO BOLT ACDC 58830 contains the HALO SMART CHARGE
TECHNOLOGY to achieve higher compatibility for charging standard 5V
USB electronic devices. The HALO SMART CHARGE TECHNOLOGY will
allow the HALO BOLT ACDC 58830 to communicate with your
electronic device and provide the fastest and safest charge for that
device.
COMPATIBILITY
Standard 5V USB electronic devices including: Mobile phones, Tablets,
PSP, NDS, MP3, MP4, MP5, Bluetooth, GPS, Cameras, and more.
USING YOUR HALO BOLT ACDC 58830 FLOODLIGHT
The oodlight can be turned on and o by simply pressing and
releasing the oodlight ON/OFF button. The oodlight will
automatically turn o after 2 hours of inactivity.
SPECIFICATIONS
Battery Cell: 3x Li-Polymer 5300mAh
Battery Pack Power: Contains a 58830 mWh battery
Input: DC 14V/0.85A
USB Output: 2x USB 5V/2.4A
AC Output: 1x AC output port 115V (65 Watts)
Dimensions: 182 x 97 x 40mm
Weight: 754 g
COMPLIANCE WITH FCC REGULATION
This device complies with part 15 of the FCC Rules and RSS-Gen of IC
Rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules, this device must be used with
certied peripherals and shielded cables. All peripherals must be
shielded and grounded. Operation with non-certied peripherals or
non-shielded cables may result in interference to radio or reception.
LIMITED WARRANTY
HALO2CLOUD LLC. (HALO) warrants its products to be free from defects
in material and workmanship under normal use. Conditions are as
follows:
• During the rst 90 days from date of purchase, HALO will repair or
replace the defective product.
• HALO will, subject to inspection, repair the defective product or
replace it with a new or reconditioned unit. The return must be
accompanied by a Return Merchandise Authorization (RMA) number
to be issued upon request, and must be shipped prepaid.
• Where applicable, all requests for warranty returns must be
accompanied by a proof of purchase.
• The warranty does not extend to the electronic equipment that is
used, or incorporates with any of our products and accessories. HALO
shall not be held responsible for the improper use of its products.
• In no event shall HALO be liable for any incidental, special,
consequential or punitive damages arising out of the use of HALO’s
products.
For all questions or exchange requests, please call 888-907-6274,
contact us at zagg.com/support or visit
www.zagg.com/warranty-policies.
This Limited Warranty sets forth the full scope of HALO’s obligations
and liabilities with respect to the product. All implied warranties,
including without limitation the implied warranties of merchantability
and tness for a particular purpose, are limited to the duration of this
Limited Warranty. In no event shall HALO be liable for any incidental,
special, consequential or punitive damages or any damages or losses of
or to electronic equipment or products that are used with any of
HALO’s products.
CHARGING A LAPTOP VIA THE AC OUTPUT PORT
1. Connect the AC power plug from your laptop (or other electronic
device which is rated at 65 watts or less) into the AC output port of the
HALO BOLT ACDC 58830.
2. Press the AC Power ON/OFF Button and wait for a solid green light
LAPTOP CHARGING TROUBLESHOOTING TIPS
SAFETY PRECAUTIONS
DANGER-CAUTION Read and understand all safety information
before using this product. Failure to follow these instructions may
result in electrical shock, explosion, re which may result in serious
injuries, death or property damage.
• When used correctly, lithium- ion rechargeable batteries provide a
safe and dependable source of portable power. However, if they are
misused or abused, this may result in leakage, burns, re or explosion,
causing personal injury or damage to other devices.
• Misusing or incorrectly connecting your HALO BOLT ACDC 58830 may
cause electric shock to users and damage equipment.
• Do not operate in explosive atmospheres such as in the presence of
ammable liquids, gases or dust.
• Remove jump start clamps from vehicle battery after jump starting
vehicle.
• Keep your HALO BOLT ACDC 58830 dry and away from moisture and
corrosive materials. The HALO BOLT ACDC 58830 should not be used
near water or wet areas such as bathtubs, showers, bathrooms, sinks,
swimming pools or basements.
• Do not expose your HALO BOLT ACDC 58830 to moisture, water, rain,
or snow.
• Keep your HALO BOLT ACDC 58830 away from heat sources, including
open ames, radiators, stoves, ovens, and any other devices that
product heat.
• The lithium-ion rechargeable battery used in this charging
device may present a risk of re or chemical burn if mistreated. Do not
expose to re or excessive temperature. Do not expose to heat above
212°F (100°C) or incinerate.
• In the unlikely event of leakage or explosion use sand or a chemical
re extinguisher.
• Your HALO BOLT ACDC 58830 may become warm under extended
high power operation. Do not cover, wrap, or otherwise restrict the
HALO BOLT ACDC 58830 during operation.
• Do not disassemble your HALO BOLT ACDC 58830. There are no
user-serviceable parts inside. Incorrect reassembly may result in shock
or re hazard.
• Do not drop or subject to strong impacts. Do not operate your HALO
BOLT ACDC 58830 if it has received a sharp blow, or has otherwise
been damaged in any way.
• Do not puncture, crush or subject to mechanical shock.
• Only charge your HALO BOLT ACDC 58830 by the specied method
with the specied charging adapter provided with the unit.
• Do not use any non-HALO-branded accessories with the HALO BOLT
ACDC 58830. Doing so may cause electric shock to users and damage
equipment.
• The HALO BOLT ACDC 58830, along with its accessories, are not toys
and should be kept away from children.
• Make sure the jumper cables are fully plugged into the jump start
output before trying to jumpstart your vehicle.
• Do not touch red (positive) and black (negative) jumper clamps
together at any point.
• Do not insert any foreign object into the ports or openings of your
HALO BOLT ACDC 58830.
• Do not clean your HALO BOLT ACDC 58830 with harsh chemicals,
soaps or detergents. Just wipe the case with a soft cloth.
• Make sure the HALO BOLT ACDC 58830’s charging ports do not
become contaminated with lint or other debris. Use a canned-air type
of product periodically to ensure that the port openings are clear.
• Batteries should be recycled or disposed of as per state and local
guidelines.
• Storage: 4°F - 158°F (-15°C - 70°C), Discharge: 14°F - 140°F
(-10°C - 60°C), Charge: 32°F - 113°F (0°C - 45°C)
FOR TECHNICAL SUPPORT PLEASE
CONTACT US AT:
ZAGG.COM/SUPPORT
OR
CALL US AT: 8889076274
HALO
910 W LEGACY CENTER WAY
STE. 500, MIDVALE, UTAH 84047
WWW.ZAGG.COM/HALO
©2020 ZAGG Inc | www.ZAGG.com/HALO
All trademarks are the property of ZAGG Inc.
All rights reserved.
ZAGG Inc | 910 W Legacy Center Way, Ste. 500, Midvale, Utah 84047
Made in China.
Table of contents
Other Halo Accessories manuals
Popular Accessories manuals by other brands

PCB Piezotronics
PCB Piezotronics JM320C18 Installation and operating manual

Ravpower
Ravpower RP-PB055 user guide

IFM Electronic
IFM Electronic efector 300 SU8001 operating instructions

Leviton
Leviton LURDW-00W Lumina RF quick start guide

ENFORCER
ENFORCER E-931-S50RRGQ manual

Philips
Philips CRP137 brochure