Halo Pocket Power 6000 User manual

Operating Instructions
6000

Content
Warning 3-5
Illustration 6
Accessories 7
Operation Instructions 8
Specifications 9
Features 10-11
Demonstration 12-14
If the power charger does NOT charge your
mobile phone when the micro USB connector
is connected to your mobile phone, please
restart the power charger while it is connected
to your mobile phone (please refer to page 8 for
details.
2

Read all safety information and operating
instructions before using this HALO charger to avoid
possible injury and damage to your device. We
assume no responsibility for damage to charged
devices due to improper operations of this power
charger.
How to Handle
Do not drop, disassemble, open, crush, bend,
deform, puncture, shred, microwave, incinerate,
paint, or insert foreign objects into the HALO
charger.
Safety Information
Do not get the HALO charger wet. In case it does
get wet, unplug all cables and turn off power, by
pressing the power button for three seconds. Allow
it to dry thoroughly before turning it on again. Do not
attempt to dry the power charger with an external
heat source, such as a microwave or hair dryer. A
power charger that has been damaged as a result of
exposure to liquids is not serviceable.
Repair and Modification
Never attempt to repair or modify your HALO char-
ger yourself. Disassembling this power
charger, including the removal of external screws,
may cause damage that is not covered under the
warranty. If this power charger has been
submerged in water, punctured, or dropped, do not
use it.
3

Battery Replacement
The rechargeable battery in your HALO charger
should be replaced only by HALO2CLOUD, LLC.
How to Recharge
Please use the built-in USB input connector to
recharge the HALO charger.
How to Use Connectors and Ports
Never force a connector into a port. If the connector
and port do not easily join, check for obstructions in
the port. If there are no visible obstructions, make
sure that the connector matches the port and that
you have positioned the connector correctly in
relation to the port.
How to Reboot
If there is an unexpected short circuit, the HALO
charger will shut down as a protective measure. In
case this happens, use the built-in USB cable, not
the power button, to reboot/turn on the HALO
charger.

Device and Accessories
1. Power button (turn ON/OFF)
2. LED power indicator lights
3. Micro USB output connector (5V/1A)
4. Recharge USB input connector
5. USB output port (5V/2A)
6. Standard USB tip
7. Micro USB tip
8. Lightning tip
9. 30-Pin tip
h
r
h
r
h
r
h
r
1
2
3
4
5
6
7
8
9
3-in-1 Cable

To Turn On/Off the HALO Pocket Power 6000
To start, press and hold the power button for
three seconds. The three LED lights will blink for
five seconds when the device is turned on. Press
the power button for three seconds to turn off.
Charge the HALO Pocket Power 6000
Connect the USB input connector (#4 on illustra-
tion) to the Standard USB port on your computer
or an AC adapter that accepts Standard USB.
Charge your Personal Electronic Device
For electronic devices with a micro USB input,
insert the Micro USB output port (#3 on illustra-
tion) directly into your device.
For electronic devices with a 30-pin input, use the
supplied 3-in-1 cable. Plug the Standard USB
end of the 3-in-1 cable into the USB output port
(#5 on illustration) of the HALO charger and the
30-pin tip into your electronic device.
For electronic devices with a Lightning port, use
the supplied 3-in-1 cable. Plug the Standard USB
end of the 3-in-1 cable into the USB output port
(#5 on illustration) of the HALO charger and the
Lightning tip into your electronic device.
You can also charge two devices at one time by
using both the Micro USB output connector (#3
on illustration) and the 3-in-1 cable, plugged into
the USB output port (#5 on illustration).

Battery Capacity Indicator
With the power off, press and release the power
button to track the remaining battery capacity.
Intelligent Recognition
The HALO charger is programmed with an intelligent
recognition system to achieve higher compatibility
for charging different mobile phones. If it does not
charge when the micro USB connector is connected
to your mobile phone, please restart the power
charger.
Specifications
Battery Cell: Rechargeable lithium polymer
Capacity: 6000 mAh
Input: 5V/1A
Micro USB output: 5V/1A
USB output: 5V/2A
Dimensions: 4.6” x 3” x 0.7” (116 x 78 x 18mm)
Compatible with:
Mobile phones, Tablets, PSP, NDS, MP3, MP4, MP5,
Bluetooth GPS, Cameras and more

Features
- Lithium Polymer battery pack with high safety and
stability.
- Unique Equilibrium PCBA protection ensures
longer device life.
- Multiple safety protection system to ensure device
safety.
- Quick charging, high working efficiency.
- Lower static power.
- Overcharge protection.
- Over discharge protection.
- Short circuit protection: if any of the output ports
meets a short circuit, the power charger will shut
down automatically; recharge it to restart the power
charger.
Notes
- The power charger supports charging and
discharging at the same times.
- If the power charger has an embedded,
non-replaceable battery, do not attempt to open the
power charger to remove the battery as this may
cause injury and damage to the power charger.
- Please contact the local recycling facility for
removal of the battery. The embedded, non-
replaceable battery is designed to last the lifetime of
the product.

Do not dispose of unit with
general waste. Contains lithium
polymer battery. Please return it
to battery recycling collection
center. For recycling center near
you, call 1-877-2-RECYCLE.
1. This device complies with the Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that may
cause undesired operation.
2. Changes or modifications not expressly approved
by the party responsible for compliance could void
the user’s authority to operate the equipment.

Demonstration 1
Recharging the HALO Pocket Power 6000 from a
computer USB port.

Demonstration 2
Charging phones (and other 5V/1A Micro USB
input devices) using the Micro USB output con-
nector (#3 on illustration).
Compatible with:
Samsung Galaxy S4
Samsung Galaxy SIII
Samsung Galaxy Note II
Blackberry Z10
+ many additional models

30-pin
Demonstration 3
Charging 30-pin port iPhones and iPods using the
USB output port (#5 on illustration) and the 30-pin
tip of the 3-in-1 cable.
Compatible with:
iPhone 3, 4, 4s
iPad Generation 1, 2, 3
iPod family
h
r
h
r
h
r
h
r

Micro USB
Demonstration 4
Charging tablets (and other 5V/2A Micro USB
input devices) using the USB output port (#5 on
illustration) and the Micro USB tip of the 3-in-1
cable.
Compatible with:
Kindle Fire
Google Nexus Tablet
Blackberry Play Book
+ many additional models
For the following, please use cord provided with the device:
Nook Color
Nook/Nook HD
Samsung Galaxy Tab 2, 3
h
r
h
r
h
r
h
r

iPhone 5
Lightning
Demonstration 5
Charging Lightning port iPhones and iPads using
the USB output port (#5 on illustration) and the
Lightning tip of the 3-in-1 cable.
Compatible with:
iPhone 5, 5C, 5S
iPad Mini
iPad 4
h
r
h
r
h
r
h
r

Limited Warranty
HALO2CLOUD, LLC warrants its products to be free
from defects in material and workmanship under
normal use. Conditions are as follows:
- During the first one year from date of purchase,
HALO2CLOUD, LLC will repair or replace the defective
product.
- HALO2CLOUD, LLC will, subject to inspection, repair
the defective product or replace it with a new or
reconditioned unit. The return must be accompanied
by a Return Materials Authorization (RMA) number to
be issued upon request, and must be shipped prepaid.
A shipping rebate will only be extended to the
customer in the event that a defect in material or
workmanship is confirmed.
- Warranty is void if the product has been improperly
handled or misused in any way, or if the label and/or
bar-coded warranty label has been removed or
tampered with.
- Warranty returns require a check for $14.95 for
processing and handling made payable to
HALO2CLOUD, LLC.
- Where applicable, all requests for warranty returns
must be accompanied by a proof of purchase and be
sent to HALO2CLOUD, LLC (www.halo2cloud.com).
- The warranty does not extend to the electronic
equipment that is used or which incorporates with any
of our products and accessories. HALO2CLOUD, LLC
shall not be held responsible for the improper use of its
products.