Hamilton Beach Stay or Go User manual

GB Stay or Go Blender
Operation Manual – Original Instructions (2)
AR
(16)
ZH Stay or Go 攪拌機
操作手册 (30)
MS Pengisar Stay or Go
Manual Pengendalian (44)
FR Mélangeur Stay or Go
Manuel d’utilisation (58)
Type: B78
!

2
IMPORTANT SAFEGUARDS
1. Read all instructions.
2. This appliance is not intended for use by persons
with reduced physical, sensory, or mental
capabilities, or lack of experience and knowledge,
unless they are closely supervised and instructed
concerning use of the appliance by a person
responsible for their safety.
3. This appliance should not be used by children.
Keep the appliance and its cord out of reach of
children.
4. Close supervision is necessary when any
appliance is used near children. Children should
be supervised to ensure that they do not play
with the appliance.
5. T o protect against risk of electrical shock, do not
put cord, plug, base, or motor in water or other liquid.
6. Always disconnect the appliance from the
power supply if it is left unattended and before
assembling, disassembling, or cleaning.
7. Avoid contact with moving parts.
8. Do not operate any appliance with a damaged
supply cord or plug, or after the appliance
malfunctions or has been dropped or damaged
in any manner. Supply cord replacement and
repairs must be conducted by the manufacturer,
its service agent, or similarly qualified persons in
order to avoid a hazard.
9. The use of attachments, including canning
jars, not recommended or sold by the appliance
manufacturer may cause a risk of injury to
persons.
10. Do not use outdoors.
When using electrical appliances, basic safety precautions should always be followed to reduce the risk of
fire, electric shock, and/or injury to persons, including the following:
GB

3
11. Do not let cord hang over edge of table or
counter or touch hot surfaces, including stove.
12. Keep hands and utensils out of blending jar
while blending to reduce the risk of severe
personal injury and/or damage to blender.
Arubber spatula may be used but must be used
only when blender is not running.
13. Blades are sharp; handle carefully—especially
when assembling, disassembling, or cleaning
inside blending jar.
14. Do not use a broken, chipped, or cracked
blending jar.
15. Do not use broken, cracked, or loose cutting
blade assembly.
16. To reduce the risk of injury, never place cutting
blade assembly on base without blending jar or
grinding cup properly attached.
17. Always operate blender with lid in place.
Remove emulsion cup only for adding
ingredients or to insert the tamper.
CAUTION: Do not not operate without
cover in place.
18. Do not blend hot liquids in the travel jar or
grinding cup.
19. When blending hot liquids in the 32-oz. blending
jar, remove center piece of two-piece cover.
Hot liquids may push lid off jar during blending.
To prevent possible burns: Do not fill blending
jar beyond the 3-cup (710-ml) level. With the
protection of an oven mitt or thick towel, place
one hand on top of lid. Keep exposed skin away
from lid. Start blending at lowest speed.
20. Be careful if hot liquid is poured into the blender
as it can be ejected out of the appliance due to
sudden steaming.
21. Ensure collar on base of blending jar, travel jar,
and grinding cup are tight and secure. Injury

4
can result if moving blades accidentally become
exposed.
22. If the jar should twist or rotate when the motor is
switched ON (I), switch OFF ( ) immediately and
tighten jar in collar or on blender base.
23. Do not leave blender unattended while it is
operating.
24. Before plugging cord into wall socket, turn the
control to OFF ( ). To disconnect cord, turn the
control to OFF ( ). Then remove plug from wall
socket.
25. Do not use appliance for other than intended
purpose.
26. Do not place on or near a hot gas or electric
burner or in a heated oven.
27. Your plug is provided with a fuse approved
by ASTA to B.S. 1362. If you need a
replacement fuse carrier, it must be replaced
with the same colour-coded carrier with the
same markings. Fuse covers and carriers can be
obtained from approved service agents.
28. Do not operate more than 3 minutes ON at
a time.
29. CAUTION: In order to avoid a hazard due
to inadvertent resetting of the thermal cut-out,
this appliance must not be supplied through an
external switching device, such as a timer, or
connected to a circuit that is regularly switched
on and off by the utility.

5
Recycling the Product at the End of Its Service Life
The wheeled bin symbol marked on this appliance signifies that it must be taken over by a selective
collection system conforming to the WEEE Directive so that it can be either recycled or dismantled
in order to reduce any impact to the environment. The user is responsible for returning the product
to the appropriate collection facility, as specified by your local code. For additional information
regarding applicable local laws, please contact the municipal facility and/or local distributor.
SAVE THESE INSTRUCTIONS
Other Consumer Safety Information
This appliance is intended to be used in household and similar
applications such as:
– staff kitchen areas in shops, offices, and other working
environments;
– farm houses;
– by clients in hotels, motels, and other residential-type
environments;
– bed and breakfast-type environments.
The appliance is not intended for commercial, professional, or
industrial use.
The length of the cord used on this appliance was selected to
reduce the hazards of becoming tangled in or tripping over a
longer cord. If a longer cord is necessary, an approved extension
cord may be used. The electrical rating of the extension cord
must be equal to or greater than the rating of the appliance. Care
must be taken to arrange the extension cord so that it will not
drape over the countertop or tabletop where it can be pulled on
by children or accidentally tripped over.
If the cutting blade assembly locks and will not move, it will
damage the motor. Do not use. Call the toll-free customer service
number for information.
Do not place blending jar in the freezer filled with food or liquid.
This can result in damage to the cutting blade assembly, jar,
blender, and possibly result in personal injury.
BEFORE FIRST USE: After unpacking blender, wash everything
except blender base in hot, soapy water. Dry thoroughly. Wipe
blender base with a damp cloth or sponge. DO NOT IMMERSE
BASE IN WATER. Care should be taken when handling cutting
blade assembly as it is very sharp.

6
Parts and Features BEFORE FIRST USE: After unpacking the blender, follow
the instructions in “Care and Cleaning.”
Shaker/Storage
Lid
Drinking Lid
16-oz. (473-
ml) Travel Jar
Filler-Cap
Lid
32-oz. (946-ml) Blending Jar
8-oz. (237-ml)
Grinding Cup
Cutting Blades With
Permanent Gasket
(Do not try to remove
gasket.)
Control Panel
Base
Collar
Control Panel
PULSE
OFF
I
ON
Model: 52400-SAU
Type: B78
Ratings:
220–240 V~ 50–60 Hz 250 W

7
Using Your Blending Jar WARNING Laceration Hazard.
Handle blades carefully; they are very sharp. Make sure
unit is turned OFF ( ) and is unplugged.
IMPORTANT: Your blending jar
and cutting blade assembly are
subject to wear during normal
use. Always inspect jar for nicks,
chips, or cracks. Always inspect
cutting blade assembly for
broken, cracked, or loose blades.
If jar or cutting blade assembly
is damaged, do not use. Call
our toll-free customer service
number to obtain replacement
parts. 321
56 – OPTIONAL
4
Push the desired speed button.
When using the PULSE ( )
button, the blender will only run
when the button is held down.
WARNING Burn Hazard.
Do not blend hot liquids in the
travel jar or grinding cup. When
blending hot liquids, remove
filler-cap. Hot liquids may push
lid off jar during blending. To
prevent possible burns: Do
not fill blending jar beyond the
3-cup (710-ml) level. With the
protection of an oven mitt or
thick towel, place one hand on
top of lid. Keep exposed skin
away from lid. Start blending at
lowest speed.

8
Using Your Blending Jar (cont.)
Blender Tips
• To add foods when blender is operating, remove filler-cap from lid
and add ingredients through the opening.
• For best performance in the 32-oz. (946-ml) blending jar,
the minimum amount of liquid needed per recipe is 1 cup
(8 ounces/237 ml). The 16-oz. (473-ml) travel jar requires 3/4 cup
(177 ml) liquid per recipe for best performance. Add more liquid if
food is not blending properly.
• If blending action stops during blending or ingredients stick to
sides of the jar, there may not be enough liquid in the jar to blend
efficiently.
• Do not try to mash potatoes, mix stiff dough, whip egg whites,
grind raw meat, or extract juices from fruits and vegetables.
• Do not store food or liquids in the blending jar.
• Avoid bumping or dropping the blender when in operation or at
any time.
1087 9

9
Using the Travel Jar
1 2 3
4 5
Hold jar in place while blending.
Plug into socket. Press ON (I) or
PULSE ( )to blend 60 seconds or
until smooth. Always operate on
a countertop or other supporting
surface.
Add ingredients to travel jar.
Carefully place cutting assembly
and collar onto travel jar.
Turn travel jar upside down and
place onto base.
Turn bottom up; remove collar
and cutting blade assembly from
jar. Hand-tighten drinking lid onto
travel jar.
Blending Tips for the 16-oz. (237-ml) Travel Jar
• For best performance in the 16-oz. (237-ml) travel jar, the minimum
amount of liquid needed per recipe is 3/4 cup (6 ounces/177 ml).
• Do not chop or process hard foods such as cheese, crackers, or meat.
• If blending action stops during blending or ingredients stick to sides
of the jar, turn blender
OFF ( ). Remove jar, collar, and blade and
use a narrow rubber spatula to stir.
• Do not process hot foods or liquids in travel jar.
• Avoid bumping or dropping the blender.
• If blender stops working, unplug and allow 15 minutes before using.
Plug into outlet to start blending.
WARNING Burn Hazard.
Do not blend hot ingredients.
Pressure may build, causing jar
to pop off and hot ingredients to
erupt.
WARNING Laceration Hazard.
Handle blades carefully; they
are very sharp. Make sure unit is
turned OFF ( ) and is unplugged.

10
Blending Drinks
Grinding Food
TIPS FOR BEST RESULTS:
• Always place liquid in blending jar first, then remaining ingredients.
• If ice is not blending, stop blender and press PULSE ()a few times.
TIPS FOR BEST RESULTS:
• Press PULSE () until food is the desired texture.
• Parmesan cheese and other hard cheeses should remain refrigerated prior to blending.
TYPE OF DRINK INGREDIENTS (32 oz.) INGREDIENTS (16 oz.) BLENDER SETTING/TIME
Fruit Smoothie 1 1/2 cups (355 ml) milk
2 cups (473 ml) yogurt
2 1/2 cups (591 ml) frozen berries or
other fruit
Serves: 4–5
3/4 cup (177 ml) milk
3/4 cup (177 ml) yogurt
1 cup (237 ml) frozen berries or
other fruit
Serves: 1–2
PULSE ()for 60 seconds.
Press ON (I) and blend until
well blended.
Milkshake 1 3/4 cups (414 ml) milk
4 large scoops ice cream
1/4 cup (59 ml) flavored syrup
Serves: 4–5
1 cup (237 ml) milk
2 large scoops ice cream
2 to 3 tablespoons (30 to 44 ml)
flavored syrup
Serves: 1–2
Press ON (I) and blend until
well blended.
Frozen Drink 2 cups (473 ml) drink mix, such as
Piña Colada mix
4 oz. (118 ml) liquor, if desired
20 ice cubes
Serves: 4–5
1 cup (237 ml) drink mix, such as
Piña Colada mix
2 oz. (59 ml) liquor, if desired
10 ice cubes
Serves: 2–3
PULSE ()for 60 seconds.
Press ON (I) and blend until
well blended.
FOOD MAX AMOUNT IN GRINDING CUP PREPARATION
Parmesan Cheese 4 oz. (113 g) 1/2-in. (1.3-cm) cubes
Nuts 1/2 cup (118 ml) None
Cookie or Cracker Crumbs 1/2 cup (118 ml) Break cookies or crackers into pieces
Coffee Beans 1/2 cup (118 ml) None