HAMPTON BAY 710.193.000 User manual

THANK YOU
quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
WALTON SPRINGS STATIONARY ROCKER
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday,
9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
chair
Item # 1002 665 249
1002 582 415
1002 554 645
Model # 710.193.000
710.193.000 BARE

2
Table of Contents
Table of Contents ................................... 2
Safety Information .................................. 2
Warranty .......................................... 2
What is covered ................................... 2
What is not covered ................................ 2
Pre-Assembly ...................................... 3
Planning Assembly................................. 3
Hardware Included................................. 3
Chair Package Contents ............................. 4
Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Care and Cleaning .................................. 6
Safety Information
CAUTION: Read all of the instructions in this manual
before you begin assembly. Failure to do so may result in
faulty assembly and potential injury!
Warranty
5 YEAR FRAME WARRANTY/3 YEAR WEAVE WARRANTY/3 YEAR FABRIC WARRANTY
WHAT IS COVERED
We warrant the product to be free of manufacturing defects to the original purchaser for ve years and the weave and fabric for three years.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, freezing, or abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact Customer Care at 1-855-HD-HAMPTON or visit www.hamptonbay.com.

3
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Assembly
PLANNING ASSEMBLY
Please read this entire instruction manual prior to assembly.
Identify all parts packed in the carton against the parts list. Remove all protective materials and place the parts on a non-abrasive surface
to avoid scratching.
NOTE: More than one person may be required to assemble
this product.
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA M8x40 Bolt 4
BB 8
CC M8 Washer 12
DD Spring washer 12
EE Nut 4
BB CC DD EE FF GG HH
M8x25 Bolt
AA
FF Bolt cap 8
GG Bolt cap 16
HH Hex wrench
Metal plate
2
II 2
II

4
Pre-Assembly (continued)
CHAIR PACKAGE CONTENTS
IMPORTANT: Do not fully tighten bolts/screws until all pieces are loosely assembled.
Part Description Quantity
ARight arm 1
BLeft arm 1
C Chair seat 1
A
C
D
E
F
G
B
D
E
F
G
Seat cushion
Back cushion
1
1
1
1
Leg support
Support bar

A
E
BB
GG
GG
HH
DD
CC
D
F
B
G
5
Assembly
1 Attaching the support bar to the
arms
□Attach the support bars (D and E) to the arms (A and B)
using M8 bolts (BB), spring washers (DD) and washers (CC).
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (HH) to tighten. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Add the
3Placing the cushions
□Place the cushions (F and G) on the chair.
2 Attaching the metal plates to the seat
□Attach the metal plates (II) to the chair seat (C) using M8 bolts
(AA), spring washers (DD) and washers (CC).
Set the chair frame (C) on the rocker assembly with the front
of the seat facing you and the arrows on the support bar (E)
pointing towards you. This is very important for a safe,
balanced rocking motion.
NOTE: Please ensure all the bolts are assembled correctly
and use the hex wrench (HH) to tighten.. Do not fully tighten
bolts/screws until all pieces are loosely assembled. Add the
BB
DD
CC
AA
II
CC
DD
EE
FF
GG
C
□
□
□
plastic caps (FF and GG) after assembly is nished.
plastic caps (GG) after assembly is nished.