HAMPTON BAY Clement FP13/3CCT/NL/HD User manual

USE AND CARE GUIDE
Clement 13 Inch Panel with Night Light
Item # 1005 723 114
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and condence you have placed in Hampton Bay through the purchase of this xture.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for
your home improvement needs. Thank you for choosing Hampton Bay!
REV002
Model # FP13/3CCT/NL/HD

Table of Contents ................................... 2
Safety Information .................................. 2
FCC Statement ...................................... 2
Warranty .......................................... 2
Pre-Installation ..................................... 3
Installation......................................... 4
Color Select Instructions .............................. 5
Limited Warranty
Table of Contents
Safety Information SAVE THESE INSTRUCTIONS
This product is warrantied to be free from defects in workmanship and materials for up to 5 years from date of purchase. If it fails to do
so, please contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
NOTICE: All electrical connections must be in accordance with local and National
Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical
wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no
parts are missing by referencing the illustrations on the installation instructions.
WARNING: RISK OF SHOCK House electric current can
cause painful shock or serious injury unless handled properly.
Turn off the power supply at the fuse or circuit breaker box
before you install the fixture.
Double-check all connections to be sure they are
tight and correct.
Wear rubber soled shoes and work on a sturdy
wooden ladder.
Account for small parts and destroy packing material, as these
may be hazardous to children.
For your safety, always remember to:
This fixture is designed for use in a circuit protected by a fuse or circuit
breaker. It is also designed to be installed in accordance with local
electrical codes. If you are unsure about your wiring, consult a qualified
electrician or local electrical inspector and check your local electrical code.
CAUTION: TURN OFF THE MAIN POWER AT THE CIRCUIT
BREAKER BEFORE INSTALLING THE FIXTURE, IN ORDER
TO PREVENT POSSIBLE SHOCK.
Please read and understand this entire manual before
attempting to assemble, operate or install the product.
2
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
MIN 90˚C SUPPLY CONDUCTORS
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment
and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the
dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
Supplier’s Declaration of Conformity:
47 CFR § 2.1077 Compliance Information
Responsible Party:
Feit Electric Company
4901 Gregg Road,
Pico Rivera, CA 90660, USA
562-463-2852
Unique Identifier:
F13/3CCT/NL/HD (1005 723 114)

Pre-Installation
AA
Phillips
Screwdriver
BB CC DD
HARDWARE INCLUDED
TOOLS REQUIRED
NOTE: Hardware not shown to actual size.
Part Description Quantity
AA 1
1
2
13 inch Fixture
BB Mounting Bracket
J-Box Mounting Screws
3DD
CC
Wire Connectors
3

Installation
Turning Off the Power
Identifying the Wires
NOTE: Make sure the mounting bracket (BB)
is installed with the label facing downwards. NOTE: Select the preferred color temperature
by using the switch behind the fixture (AA). Refer to the
“Color Select Instructions” section.
1Connecting the Wires 4
Installing the Fixture
1. Feed the wires through the mounting bracket's (BB) center hole
into the junction box.
2. Raise the fixture (AA) to the mounting bracket (BB).
Align the arrows on the fixture (AA) to the mounting braket (BB).
3. Twist the fixture (AA) clockwise to lock in place firmly.
5
2
1. Line Voltage - Black, Neutral - White, Ground - Bare Copper
Installing the Mounting Bracket
to the Junction Box
3
1. Feed the junction box wires through the center
of the mountung plate (BB).
2. Attach the mounting plate (BB) to the junction box
using two J-box mounting screws (CC).
Junction Box
Line Voltage
Line Voltage
Neutral
Neutral
Connect the wires of the fixture to the wires from the J-box.
(Black to Line Voltage, White to Neutral and Ground to Bare Copper)
Turn the power OFF at the fusebox or the circuit breaker.
Ground
Ground
BB
BB
AA
CC
4
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

NOTE: The night light color temperature is 2200K.
Color Select Instructions
Toggle the light switch ON and OFF within 0.5-3 seconds to cycle through the
primary light and night light.
If the fixture is left off for more than 10 seconds, the light will automatically default
to primary light when turned ON.
5
When the Slide switch is set to SW (Soft White), the color temperature is set at 3000K
When the slide switch is set to BW (Bright White), the color temperature is set at 4000K.
When the slide switch is set to DL (Daylight), the color temperature is set at 5000K.
PRESELECT THE COLOR TEMPERATURE FOR YOUR
PRIMARY LIGHT BY USING THE SWITCH
BEHIND THE FIXTURE PRIOR TO INSTALLATION.
CHANGE BETWEEN THE PRIMARY LIGHT
TO NIGHT LIGHT BY USING THE
LIGHT SWITCH.
The fixture is dimmable from 10% - 100%

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
READ AND FOLLOW ALL SAFETY INSTRUCTIONS