HAMPTON BAY LAGUNA POINT DEEP SEATING KD SECTIONAL SET 5 W/... User manual

USE AND CARE GUIDE
Model #
Item #
HAMPTONBAY.COM
THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this table . We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your
home improvement needs. Thank you for choosing Hampton Bay!
855-HD-HAMPTON -1
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 6 p.m., EST, Mon day
LAGUNA POINT DEEP SEATING KD SECTIONAL SET 5 W/ CUSHION-CHAIRS

Table of Contents
Table of Contents............................................................2
Safety Information...........................................................2
Set Up Your Furniture Properly...................................2
Examine Your Furniture...............................................2
Observe Weight Limits.................................................2
Warranty.. .........................................................................2
What is Covered...........................................................2
What is Not Covered....................................................2
Pre-Assembly....................................................................3
Planning Assembly........................................................3
Hardware Included........................................................3
Package Contents.................................................4,5,6,7
Assembly. .......................................................
Care and Cleaning...........................................................13
Safety Information
8,9,10,11,12
2
Please contact 855-HD-HAMPTON for f
HAMPTONBAY.COM
urther assistance.
1-
SET UP YOUR FURNITURE PROPERLY
□ Ensure that all parts are assembled properly and fully tightened as per the instructions.
□ When placing in the desired location, ensure that all legs are resting on the
same surface.
EXAMINE YOUR FURNITURE
□ Examine occasionally to ensure that there are no
loose parts. If loose parts are found, they must be re-tightened fully
before additional use.
OBSERVE WEIGHT LIMITS
The weight limits for the following products are listed
below:
CAUTION: your furniture, injuries
can occur.
Warranty
TWO YEAR FRAME, AND FABRIC LIMITED WARRANTY WEAVE
□ Chair: 300 lbs
□ Swivel Chair: 300 lbs
□ Loveseat: 500 lbs
□ Ottoman: 150 lbs
□ Table: 50 lbs
□ Sofa: 700 lbs
□ Rocking Chair: 300 lbs
□ Chaise Lounge: 300 lbs
□ Dining Table: 100 lbs
WHAT IS NOT COVERED
Contact the Customer Service Team at 855-HD-HAMPTON or visit www.Hamptonbay.com. 1-
We warrant the frame, weave and fabric to be free of manufacturing defects to the original purchaser for two years. For glass table
top we warrant 30 days from the date of purchase.
This warranty does not cover commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts
are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
□Dining Chair: 200 lbs
If you overload
WHAT IS COVERED

Pre-Assembly
Part Description Quantity
AA Φ1/4 x40 mm 6
CC
Washer Φ 6mm
39
Bolt
DD
1
3
Please contact 855-HD-HAMPTON for f
HAMPTONBAY.COM
urther assistance.
1-
EE
Hex wrench
4mm
4
Part Description Quantity
AA Bolt φ8x20 mm 38
BB Washer φ8 mm 38
CC Cap for bolt 38
DD Hex wrench 5 mm 1
EE
EE
U Shape connector
4
PLANNING ASSEMBLY
To prevent damage, place all parts on a soft surface during assembly. Remove all protective caps before beginning
assembly.
HARDWARE INCLUDED
Part Description Quantity
AA
Φ1/4 x40 mm
12
BB
Washer Φ6 mm
CC 16
Bolt
DD
Hex wrench 4 mm 1
Φ1/4 x20 mm 4
Bolt
AA BB CC DD
BB Φ1/4 x20 mm 33
Bolt

4
Please contact 855-HD-HAMPTON for f
HAMPTONBAY.COM
urther assistance.
1-
Pre-Assembly (continued)
PACKAGE CONTENTS (LEFT ARM)
A Seat 1
B Back 1
C Left Arm 1
F
Side skirt 1
D
Back Cushion 1E
Seat Cushion 1
A
B
C
D
F
E
Part Description Quantity
A Seat 1
B Back 1
C Left arm 1
D Right side skirt 1
E Seat cushion 1
F Back cushion 1
Part Description Quantity

5
Please contact 855-HD-HAMPTON for f
HAMPTONBAY.COM
urther assistance.
1-
Pre-Assembly (continued)
PACKAGE CONTENTS(RIGHT ARM)
G
H
D
F
E
I
Part Description Quantity
G Seat 1
H Back 1
I Right arm 1
Left side skirt 1
Seat cushion 1
Back cushion 1
J
E
F
G Seat 1
H Back 1
I Right Arm 1
F
Side skirt 1
D
Back Cushion 1E
Seat Cushion 1
Part Description Quantity

6
Please contact 855-HD-HAMPTON for f
HAMPTONBAY.COM
urther assistance.
1-
Pre-Assembly (continued)
PACKAGE CONTENTS(MIDDLE)
F
E
J
D
D
K
J Seat 1
K Back 1
F
Side skirt 1
D
Back Cushion 1E
Seat Cushion 1
Part
Part
Part
Part Description
Description
Description
Description Quantity
Quantity
Quantity
Quantity
G Seat 1
H Back 1
I Right Arm 1
F
Left side skirt 1
J
Back Cushion 1E
Seat Cushion 1
Part Description Quantity

Pre-Assembly (continued)
PACKAGE CONTENTS
Pre-Assembly (continued)
PACKAGE CONTENTS(CORNER)
Part
Part
Part
Part Description
Description
Description
Description Quantity
Quantity
Quantity
Quantity
K Seat 1
L Back 1
J Left side skirt 1
F
Right side skirt 1
D
Back Cushion 1E
Seat Cushion 1
7
Please contact 855-HD-HAMPTON for f
HAMPTONBAY.COM
urther assistance.
1-
Part Description Quantity
P
Seat
1
L
Right back 1
Left back 1
2
O Back cushion
1
M
Side skirt
N
L
M
P
N
O
D1
D
Seat cushion

Assembly(Left arm)
1Attaching the left arm to the 2Attaching the back
3
Adding the side skirt 4
Completing the assembly
□ □
□
□
holes on the seat (A) with the holes on the side
skirt (D) and inserting bolts (BB) with washers (CC).
Tighten half way using the Hex wrench (DD). Do not
tighten completely.
Attach the side skirt (D) to the seat (A) by aligning
8
Please contact 855-HD-HAMPTON for f
HAMPTONBAY.COM
urther assistance.
1-
A
C
BB
BB
CC
CC
A
B
C
E
seat
Attach the back (H) to the seat (G) by aligning two
holes on the
back (H) with the two holes on the seat (G). Insert bolts (AA)
with washers (BB) and tighten half way using the Hex wrench
(DD). Do not tighten completely.
□
□
□
□
1Attaching the right arm
Place the left arm (C) on a soft surface.
Attach the seat (A) to the right arm (D) by aligning
holes on the seat (A) with the holes on the left arm
(C) and inserting bolts (AA) with washers (CC).
Tighten half way using the Hex wrench (DD).
CC
X2
□
□
AA
CC
CC
AA
X2
AA
A
D
Place the left arm (C) on a soft surface.
Attach the seat (A) to the left arm (C) ,fasten with
bolts (AA) with washers (CC). Tighten half way using
the Hex wrench (DD).
Tighten half way using the Hex wrench (DD).
Tighten half way
using the Hex wrench (DD).
Put the back ( B ) metal side into the hole of arm (C).
Attach left arm (C) to the back (B),fasten bolts (AA) and
washer (CC).
Insert two pins on the back (B)into the holes on arm (C) ,
fasten bolts (BB) and washer (CC).
BB CC
A
B
A
B
BB CC
AA
CC
F
Check and make adjustment as needed.
Fully tighten all the bolts with the Hex wrench(DD) .
Place the seat cushion (F) and the back cushion(E)
on the chair.
This chair is now ready for your enjoyment.
C

Assembly(Right arm)
1Attaching the Right arm to the
2Attaching the back
3
Adding the side skirt 4
Completing the assembly
□ □
□
□
Attach the seat (G) to the right arm (I) by aligning holes
on the seat (G) with the holes on the left arm (I) and
inserting bolts (AA) with washers (BB). Tighten half
way using the Hex wrench (DD). Do not tighten
completely.
Place the left arm (I) on a soft surface.
theback (H) with the two holes on the seat (G). Insert
bolts (AA)with washers (BB) and tighten half way using the
Hex wrench(DD). Do not tighten completely.
Attach the back (H) to the seat (G) by aligning two holes on
holes on the seat (G) with the holes on the side
skirt (J) and inserting bolts (AA) with washers (BB).
Tighten half way using the Hex wrench (DD). Do
not tighten completely.
Attach the side skirt (D) to the seat (G) by aligning
9
Please contact 855-HD-HAMPTON for f
HAMPTONBAY.COM
urther assistance.
1-
seat
G
I
AA
BB
G
I
AA
G
H
I
BB
AA
BB
BB
BB CC
CC
F
E
Place the right arm (I) on a soft surface.
Attach the seat (G) to the right arm (I) ,fasten with
bolts (AA) with washers (CC). Tighten half way using
the Hex wrench (DD).
Tighten half way using the Hex wrench (DD).
Tighten half way
using the Hex wrench (DD).
Put the back ( H ) metal side into the hole of arm (I).
Attach right arm ( I) to the back (H),fasten bolts (AA) and
washer (CC).
Insert two pins on the back (B)into the holes on arm (I) ,
fasten bolts (BB) and washer (CC).
holes on the seat (A) with the holes on the side
skirt (D) and inserting bolts (BB) with washers (CC).
Tighten half way using the Hex wrench (DD). Do not
tighten completely.
Attach the side skirt (D) to the seat (G) by aligning Check and make adjustment as needed.
Fully tighten all the bolts with the Hex wrench(DD) .
Place the seat cushion (F) and the back cushion(E)
on the chair.
This chair is now ready for your enjoyment.
□
□
□
□
G
I
H
BB CC
AA
CC
CC
X2
AA
CC
CC
AA
X2
AA
G
I
X2
CC
X3
BB

Assembly(Middle)
1Attaching the back to the seat
2Attaching the one side skirt
3
Attaching the other side skirt 4
□
□
□ □
□
□
Attach the seat (J) to the back (K) by aligning holes on
the back (K) with the holes on the seat (J) and inserting
bolts (BB) with washers (CC). Tighten half way using
the Hex wrench (DD). Do not tighten completely.
Place the back (K) on a soft surface.
on the seat (J) with the holes on the side skirt (D) and
inserting bolts (BB) with washers (CC). Tighten half way
using the Hex wrench (DD). Do not tighten completely.
Attach the side skirt (D) to the seat (J) by aligning holes
Repeat steps 2 to attach the other side (D)
Check and make adjustment as needed.
Fully tighten all the bolts (BB) with the Hex wrench (DD) .
Place the seat cushion (F) and back cushion(E) on the
chair.
This chair is now ready for your enjoyment.
Place the chair right side up.
□
□
BB J
D
K
J
K
D
CC
BB
BB
BB CC
CC
BB
CC
J
K
10
Please contact 855-HD-HAMPTON for f
HAMPTONBAY.COM
urther assistance.
1-
D
D
K
□
CC
Completing the assembly
F
E