HAMPTON BAY FCS80382AS-ST User manual

THANK YOU
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this set. We strive to continually
create quality products designed to enhance your home. Visit us onlineto see our full line of products available for your home improvement needs.
Thank you for choosing Hampton Bay!
USE AND CARE GUIDE
STATESVILLE SCROLL 5PC PADDED SLING SWIVEL DINING SET
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item # 1004 487 436
Model # FCS80382AS-ST
1004 487 438

2
Table of Contents
Table of Contents.................................. . . 2
Important Safety Instructions......................... . 2
What is covered .................................. . 3
What is not covered ................................3
Warranty .................................. . . . . . . . . 3
Pre-Assembly.................................... . . . 3
Planning Assembly .............................. . . . 3
Hardware Included .............................. . . . 4
Chair Package Contents . .................. . . . . . . . . . . 4
Care and Cleaning ................................. .
10
Chair Assembly. . .............................. . . . . . .
Important Safety Instructions
SAVE THESE INSTRUCTIONS
WARNING: THIS SET IS MADE FOR THE EXPLICIT PURPOSE OF PROVIDING OUTDOOR FUNCTIONS AND IS NOT TO BE USED AS A TOY.
THIS PRODUCT IS INTENDED FOR NORMAL OUTDOOR USE; HOWEVER, THE MANUFACTURER RECOMMENDS STORING AND/OR COVERING THIS
PRODUCT WHEN ANY FORMIDABLE/SEVERE WEATHER IS APPROACHING.
READ ALL INSTRUCTIONS BEFORE USE
To reduce the risk of injury to persons:
1. Close supervision is necessary when this furnishing is used by
or near children, or disabled persons, if applicable.
2. Use this furnishing only for its intended use as described in
these instructions. Do not use attachments not recommended by
the manufacturer.
3. Do not move the chair while it is occupied. Failure
to obey this caution could result in injury.
WARNING: DO NOT LOCATE THIS PRODUCT NEAR OPEN FLAMES. DO NOT USE THIS PRODUCT AS A SUPPORT. DO NOT SHAKE, LEAN OR CLIMB
ON THE PRODUCT. CHILDREN UNDER THE AGE OF 10, NEAR THE PRODUCT, SHOULD BE SUPERVISED BY A COMPETENT ADULT AT ALL TIMES.
THIS PRODUCT IS NOT INTENDED FOR COMMERCIAL USE AND WILL VOID THE WARRANTY.
WARNING: These table/chair units are heavy, and may
require two adults for safe assembly.
WARNING: Never use this product as a support. Do not
shake, lean, or climb on the product at any time.
WARNING: Do not place heavy objects on the table
or chairs.
WARNING: Weight limit for the chair is 250lbs
(113.39Kg).
WARNING: Please keep children out of the assembly
area before assembly.
CAUTION: When not in use, secure the product in a
cool and covered location.
CAUTION: Do not locate the product near any heat
sources.
Save These Instructions ............................ . 2
Read All Instructions Before Use.......................2
6
4. This table is not intended to support an umbrella.
Umbrellas must have a suitable base or stand.
Table Package Contents . .................. . . . . . . . . . . 5
Table Assembly . .............................. . . . . . . 9

Warranty
3 YEAR FRAME AND 2 YEAR FABRIC LIMITED WARRANTY
WHAT IS COVERED
We warrant the frames to be free of manufacturing defects to the original purchaser for three years, and a two year limited warranty for
the fabric.
WHAT IS NOT COVERED
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HAMPTONBAY.com.
Pre-Assembly
PLANNING ASSEMBLY
Read all instructions before assembly.
To avoid damaging this product, assemble it on a soft, non-abrasive surface such as carpet or cardboard.
NOTE: More than one person may be required to assemble this product.
3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
CHAIR PACKAGE CONTENTS
Pre-Assembly (continued)
4
M6x30 Combination Bolt
M6x25 Combination Bolt
16+1
8+1
AA
BB
Hex Wrench
1
CC
Part Description Quantity
Chair Bucket
Left Arm
4
4
A
B
Right Arm 4 C
Support Bar
Connection Bar
4
4
D
E
Swivel Base 4 F
Part Description Quantity
AA BB CC DD EE
DD
EE
Wrench
M6x15 Combination Bolt 24+2
2
A
C
E
D
F
B
FF
FF
M8x20 Combination Hex Bolt 16+1

Pre-Assembly (continued)
TABLE PACKAGE CONTENTS
Table Top
Table Leg
Leg Connector
1
4
1
G
H
I
Part Description Quantity
5
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
G
H
I

Chair Assembly
1Attaching The Left Arm To The Chair Bucket
2 Attaching The Right Arm To The Chair Bucket
Place the left arm (B) upside down on a soft surface.
Attach the left arm (B) to the chair bucket (A) using M6x30 combination bolts (AA).
NOTE: Loosely tighten all the bolts using the hex wrench (EE).
NOTE: Loosely tighten all the bolts using the hex wrench (EE).
6
Attach the right arm (C) to the chair bucket (A) using M6x30 combination bolts (AA).
AA
B
A
AA
C
A
AA
AA

Chair Assembly (continued)
3 Attaching The Connection Bar To The Arms
4 Attaching The Support Bar To The Chair Bucket
NOTE: Loosely tighten all the bolts using the hex wrench (EE).
7
Attach the connection bar (E) to the left arm (B) and right arm (C) using M6x15 combination bolts (CC).
NOTE: Loosely tighten all the bolts using the wrench (FF).
Attach the support bar (D) to the chair bucket (A) using M8x20 combination hex bolts (DD).
CC
CC
C
E
B
DD
D
A
DD
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Chair Assembly (continued)
5 Tightening All Bolts
Once all of the bolts are in place, fully tighten all the bolts using the hex wrench (EE) and wrench (FF).
Insert the support bar (D) to the swivel base (F).
Ensure all connections are secure before use.
8
Turn the chair right side up.
F
D

Table Assembly
1 Connecting The Table Legs To The Table Top
Place the table top (G) upside down on a soft surface.
Attach the table legs (H) to the table top (G) using M6x15 combination bolts (CC).
2 Connecting The Leg Connector The Table Legs
Connect the leg connector (I) to the table legs (H) using M6 x25 combination bolts (BB).
NOTE: Loosely tighten all the bolts using the hex wrench (EE).
NOTE: Loosely tighten all the bolts using the hex wrench (EE).
9
CC
CC
H
G
BB
BB
I
H
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.

Table Assembly (continued)
3 Tightening The Bolts
Once all of the bolts are in place, fully tighten the bolts using the hex wrench (EE).
Ensure all connections are secure before use.
10
Store the set in a dry sheltered place when not in use.
Keep the set away from fire, extreme heat, freezing conditions, and inclement weather such as rain, hail, sleet, snow, or wind.
Care
For best results, clean the frame and fabric with adamp cloth and dry thoroughly. This will help prevent mildew byremoving dirt
particles that may accumulate.
Do not clean with abrasive materials, bleach or solvents.
Care and Cleaning

Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Retain this manual for future use.
For certification use only
Factory Chair ID# FCS80382AS
Factory Table ID# FTS81112