HAMPTON BAY Lounge 65-518333B User manual

USE AND CARE GUIDE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-855-HD-HAMPTON
HAMPTONBAY.COM
Item #
Model # Lounge
65-518333B;
Bench, FG19233S
We appreciate the trust and confdence you have placed in Hampto n Bay through the purchase of this Side table. We strive to
continually create quality products designed to enhance your ho me. Visit us online to see our full line of products available
for your home improvement needs. Thank you for choosing Hampton Bay!
THANK YOU
BRIAR RIDGE 3PC SECTIONAL SET BARE

2 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Warranty
Pre-Installation
PLANNING INS TALL ATION
To prevent damage, place all parts on a soft surface during assembly. Remove all protective caps before beginning assembly.
HARDWARE INCLUDED
TWO YEAR FRAME, WE AVE AND FABRIC LIMITED WARRANTY
WH AT IS COVERED
We warrant the frame, weave and fabric to be free of manufacturing defects to the original purchaser for two years. For glass
table top we warrant 30 days from the date of purchase.
WHA T IS N OT COVERED
This w
are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.Hamptonbay.com.
Part Description Quantity
(1) 7
(2) Screws M6x45mm 5
Bolt M6x35mm
AA BB CC
(3) 1
Hex wrench 4mm

3 HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Pre-Installation( 255146)
PACKAGE CONTENTS(CHAISE)
Part Description Quantity
A 1
1
C
B
1
1
Seat Panel
Left Arm Panel (With Pre- Installed Levellers)
Left Back Cushion
D
G
H
Backrest Panel
A
D
G
1
E
Seat Cushion
Supoport Bar
F
CRight Arm Panel (With Pre- Installed Levellers) 1
1
1
Right Back Cushion
E
B
F
H

4 HAMP TONB AY.COM
Please contact 1-855-HD-HAMP TON for further assistanc e.
Installation ( 255146)
1 2
Attaching the chaise seat to the back
Place the Right Arm Panel (C) with inside face skywards
onto a clean, soft surface to avoid any scratches or
damages to the product.
□
With the help of your adult partner, place Left Arm Panel (B)
onto the assembled in Step 2 as shown above.
□
Attaching the chaise armrest to the seat
3 4 Completing the assembly
□
□
Attaching the armrest to the seat
Attach the Seat Panel (D) into the Corner Chair as shown
in picture above.
Affix Seat Panel (D) with Corner Chair by using Screws (2)
and Allen Key (3).
□
With the help of your adult partner,place the assembled
in Step 3 right side up as shown above.
Step 2.1
Step 2.2
Step 3.1
Step 3.2
Step 2.1: Align the dowels of Support Bar (E) into the
positions in the Right Arm Panel (C).
Then, affix Support Bar (E) with Right Arm Panel (C) by
using Bolt (1) and Allen Key (3).
Step 2.2: Attach the Backrest Panel (A) onto Right Arm
Panel (C) by using Bolts (1) and Allen Key (3) as shown above.
□
□
Step 3.1: Align the dowels of Support Bar (E) into the
positions in the Left Arm Panel (B).
Then, affix Support Bar (E) with Left Arm Panel (B) by
using Bolt (1) and Allen Key (3) as shown above.
Step 3.2: Pre-attach the Left Arm Panel (B) onto Backrest
Panel (A) by using Bolts (1) and Allen Key (3) as shown
above.
□
By hand, hold Left Arm Panel (B) and Backrest Panel (A)
together tightly then secure the Left Arm Panel (B) and
Backrest Panel (A) by using Bolts (1) and Allen Key (3)
as shown above.
□
Note: Using Screws (2) from inside to outside of Seat Panel
(D).
□
E

5 HAMP TONB AY.COM
Please contact 1-855-HD-HAMP TON for further assistanc e.
Installation ( 255146)
5Attaching the sofa armrest to the back
□
Inspect the Corner Chair and make sure all parts are adequately connected.
6Attaching the back to the seat
□
Turn the Corner Chair right side up.
Adjust Pre-installed Levellers
height for balance
In a sequential manner, tighten all Screws and Bolts at all joints.
□
With assistance from your adult partners, adjust the Levellers to desired height to avoid wobbles.
Place Seat Cushion (F), Left Back Cushion (G) and Right Back Cushion (H) to Seat Panel (D).
Inspect it and make sure all parts are adequately connected.
Ensure all screws, bolts are fully locked into position and secured.
The Corner Chair is ready to be used.
Caution: This Armchair can only be used on a flat, level surface.
□
□
□
□

HARDWARE INCLUDED
Part Description Quantity
(1) 7
(2) Screws M6x45mm 5
Bolt M6x35mm
(1) (2) (3)
(3) 1
Hex wrench 4mm
PACKAGE CONTENTS
6 HAMP TONB AY.COM
Please contact 1-855-HD-HAMP TON for further assistance.
Pre-Installation( 255146)
Part Description Quantity
Backrest PanelA 1
B Right Arm Panel (With Pre- installed Levellers) 1
Left Arm Panel (With Pre- installed Levellers)C 1
A
C
GB
D
E
F
G
Seat Panel
Support Bar
Seat cushion
Right Back Cushion
1
1
1
1
D
E
F
G

7 HAMP TONB AY.COM
Please contact 1-855-HD-HAMP TON for further assistance.
Installation ( 255146)
1Attaching the chaise seat to the back
2Attaching the armrest to the seat
S tep 2.1
S tep 2.2
EA
C
1
33
1
Step 3.1 Step 3.2
B
EA
C
1
3
3
1
Place the Left Arm Panel (C) with inside face skywards onto a clean, soft surface to avoid any scraches or damages to
the product.
Step 2.1: Align the dowels of Support Bar (E) into the posiitions in the Left Arm Panel (C).
Then, affix Support Bar (E) with Left Arm panel (C) by using Bolt ( 1 ) and Allen Key( 3).
Step 2.2: Attach the Backrest Panel (A) onto Left Arm Panel (C) by using Bolts ( 1) and Allen Key( 3).
□
□
□
□
Place Right Arm Panel (B) onto the assembled frame from Step 2.
Step 3.1: Align the dowels of Support Bar (E) into the positions in the Right Arm Panel (B).
Then, affix Support Bar (E) with Right Arm panel (C) by using Bolt ( 1 ) and Allen Key( 3).
Step 3.2: Attach the Right Arm Panel (B) onto Backrest Panel (A) by using Bolts (1) and Allen Key (3).
□
□
□
□

8 HAMP TONB AY.COM
Please contact 1-855-HD-HAMP TON for further assistance.
Installation ( 255146)
3Attaching the chaise seat to the back
4Attaching the armrest to the seat
Attach the Seat Panel (D) into the Left Chair as shown in picture above.
Affix Seat Panel (D) with Left Chair by using Screws (2) and Allen Key (3).
Note: Using Screws (2) from inside to outside of Seat Panel (D).
□
□
□
Inspect the Left Chair and make sure all parts are adequately connected..
In a sequential manner, tighten all Screws and Bolts at all joints.
With assistance from your adult partners, adjust the Levellers to desired height to avoid wobbles.
□
□

9 HAMP TONB AY.COM
Please contact 1-855-HD-HAMP TON for further assistance.
Installation ( 255146)
5Attaching the chaise seat to the back
6Attaching the armrest to the seat
□
Place Seat Cushion (F), Left Back Cushion (G) and Right Back Cushion (H) to Seat Panel (D).
G
F
G

HARDWARE INCLUDED
Part Description Quantity
(1) 7
(2) Screws M6x45mm 5
Bolt M6x35mm
(1) (2) (3)
(3) 1
Hex wrench 4mm
PACKAGE CONTENTS
10 HAMP TONB AY.COM
Please contact 1-855-HD-HAMP TON for further assistance.
Pre-Installation( 255146)
Part Description Quantity
Backrest PanelA1 1
B1 Right Arm Panel (With Pre- installed Levellers) 1
Left Arm Panel (With Pre- installed Levellers)C1 1
C1
G1
D1
E1
F1
G1
Seat Panel
Support Bar
Seat cushion
Right Back Cushion
1
1
1
1
B1
A1
F1
G1
D1
E1